Journal Articles

  • Bostanci, H., Yata, V.V.R.*, Kaluvan, S., “Flow-Controlled Spray Cooling Approaches for Dynamic Thermal Management,” Journal of Electronic Packaging, 143(3), pp. 031004, 2021. https://doi.org/10.1115/1.4049174  
  • Almahmoud, K., Mahadevan, T., Du, J., Bostanci, H., Zhao, W., “Investigation of Thermal Transport Properties of Copper-Supported Pillared-Graphene Structure Using Molecular Dynamics Simulations,” MRS Communications, 10(4), pp. 695-701, 2020. https://doi.org/10.1557/mrc.2020.85 
  • Almahmoud, K., Mahadevan, T., Barhemmati-Rajab, N., Du, J., Bostanci, H., Zhao, W., “Investigation of Thermal Transport Properties in Pillared-Graphene Structure using Nonequilibrium Molecular Dynamics Simulations,” MRS Communications, 10(3), pp. 506-511, 2020. https://doi.org/10.1557/mrc.2020.58 
  • Bagheri, A.*, Bostanci, H., “Comparative Approaches to Isothermal Analysis of Rotary Displacer Stirling Engines,” International Journal of Energy for a Clean Environment, 21 (3), pp. 183–199, 2020. https://doi.org/10.1615/InterJEnerCleanEnv.2020030326 
  • Bagheri, A.*, Mullins, W.C.*, Foster, P.R., Bostanci, H., “Experimental Characterization of an Innovative Low-Temperature Small-Scale Rotary Displacer Stirling Engine,” Journal of Energy Conversion and Management, 201, pp. 112073, 2019. https://doi.org/10.1016/j.enconman.2019.112073 
  • Ghotli, R.A., Abbasi, M.R., Bagheri, A.*, Raman, A.A.A., Ibrahim, S., Bostanci, H., “Experimental and Modeling Evaluation of Droplet Size in Immiscible Liquid-Liquid Stirred Vessel using Various Impeller Designs”, Journal of the Taiwan Institute of Chemical Engineers, 100, 26-36, 2019. https://doi.org/10.1016/j.jtice.2019.04.005 
  • Bostanci, H., Altalidi, S.S.*, Nasrazadani, S., “Two-Phase Spray Cooling with HFC-134a and HFO-1234yf on Practical Enhanced Surfaces,” Journal of Applied Thermal Engineering, 131, pp. 150-158, 2018. https://doi.org/10.1016/j.applthermaleng.2017.11.142    
  • Bagheri, A.*, Nasrazadani, S., Bostanci, H., “Impact of Internal Pipe Grooves on Flow Accelerated Corrosion of Small-Bore A-106 Carbon Steel Pipes”, Journal of Failure Analysis and Prevention, 17 (3), pp. 417–425, 2017. https://doi.org/10.1007/s11668-017-0237-z  
  • Bostanci, H., He, B., Chow, L.C., “Spray Cooling with Ammonium Hydroxide,” International Journal of Heat and Mass Transfer, vol. 107, pp. 45-52, 2017. https://doi.org/10.1016/j.ijheatmasstransfer.2016.11.035 
  • Bostanci, H., Rini, D.P., Kizito, J.P., Singh, V., Seal, S., Chow, L.C., “High Heat Flux Spray Cooling with Ammonia: Investigation of Enhanced Surfaces for HTC,” International Journal of Heat and Mass Transfer, vol. 75, pp. 718-725, 2014. https://doi.org/10.1016/j.ijheatmasstransfer.2014.04.019 
  • Bostanci, H., Singh, V., Kizito, J.P., Rini, D.P., Seal, S., Chow, L.C., “Micro Scale Surface Modifications for Heat Transfer Enhancement,” ACS Applied Materials and Interfaces, 5 (19), pp. 9572-9578, 2013. https://doi.org/10.1021/am402512f
  • Wu, W., Bostanci, H., Chow, L.C., Hong, Y., Ding, S.J., Su, M., Kizito, J.P., “Jet Impingement Heat Transfer Using Air-Laden Nanoparticles with Encapsulated Phase Change Materials,” ASME Journal of Heat Transfer, vol. 135 (5), pp. 052202, 2013. https://doi.org/10.1115/1.4023563 
  • Wu, W., Bostanci, H., Chow, L.C., Hong, Y., Wang, C.M., Su, M., Kizito, J.P., “Heat Transfer Enhancement of PAO in Microchannel Heat Exchanger using Nano-Encapsulated Phase Change Indium Particles,” International Journal of Heat and Mass Transfer, vol. 58 (1), pp. 348–355, 2013. https://doi.org/10.1016/j.ijheatmasstransfer.2012.11.032 
  • Bostanci, H., Van Ee, D., Saarloos, B.A, Rini, D.P., Chow, L.C, “Thermal Management of Power Inverter Modules at High Fluxes via Two-Phase Spray Cooling,” IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 2 (9), pp. 1480-1485, 2012. https://doi.org/10.1109/TCPMT.2012.2190933 
  • Bostanci, H., Rini, D.P., Kizito, J.P., Singh, V., Seal, S., Chow, L.C., “High Heat Flux Spray Cooling with Ammonia: Investigation of Enhanced Surfaces for CHF,” International Journal of Heat and Mass Transfer, vol. 55 (13-14), pp. 3849-3856, 2012.  https://doi.org/10.1016/j.ijheatmasstransfer.2012.03.040 
  • Vretenar, N., Newell, T.C., Carson, T., Peterson, P., Lucas, T., Latham, W. P., Bostanci, H., Huddle-Lindauer, J.J., Saarloos, B.A., Rini, D.P., “Cryogenic Ceramic 277 Watt Yb: YAG Thin-Disk Laser,” Optical Engineering, vol. 51(1), pp. 014201-1, 2012. https://doi.org/10.1117/1.OE.51.1.014201 
  • Wu, W., Bostanci, H., Chow, L.C., Ding, S.J., Hong, Y., Su, M., Kizito, J.P., Gschwender, L., Snyder, C.E., “Jet Impingement and Spray Cooling Using Slurry of Nanoencapsulated Phase Change Materials,” International Journal of Heat and Mass Transfer, vol. 54, pp. 2715–2723, 2011. https://doi.org/10.1016/j.ijheatmasstransfer.2011.03.022 
  • Wu, W., Du, J.H., Lin, Y.R., Chow, L.C., Bostanci, H., Saarloos, B.A., Rini, D.P, “Evaluation of Compact and Effective Air-cooled Carbon Foam Heat Sink,” ASME Journal of Heat Transfer, vol.133(5), pp. 054504, 2011. https://doi.org/10.1115/1.4003193 
  • Wu, W., Bostanci, H., Chow, L.C., Hong, Y., Su, M., Kizito, J.P., “Nucleate Boiling Heat Transfer Enhancement for Water and FC-72 on Titanium Oxide and Silicon Oxide Surfaces,” International Journal of Heat and Mass Transfer, vol. 53(9), pp. 1773–1777, 2010. https://doi.org/10.1016/j.ijheatmasstransfer.2010.01.013 
  • Bostanci, H., Rini, D.P., Kizito, J.P., Chow, L.C., “Spray Cooling with Ammonia on Microstructured Surfaces: Performance Enhancement and Hysteresis Effect,” ASME Journal of Heat Transfer, vol.131(7), pp. 071401, 2009. https://doi.org/10.1115/1.3089553    
  • El-Genk, M.S., Bostanci, H., “Combined Effects of Subcooling and Surface Orientation on Pool Boiling of HFE-7100 from a Simulated Electronic Chip,” Journal of Experimental Heat Transfer, vol.16(4), pp. 281-301, 2003. https://doi.org/10.1080/08916150390242244 
  • El-Genk, M.S., Bostanci, H., “Saturation Boiling of HFE-7100 from a Copper Surface, Simulating a Microelectronic Chip,” International Journal of Heat and Mass Transfer, vol.46(10), pp. 1841-1854, 2003. https://doi.org/10.1016/S0017-9310(02)00489-1

Book Chapter

  • Arik, M., Kosar, A., Bostanci, H., Bar-Cohen, A., “Pool Boiling Critical Heat Flux in Dielectric and Nano Fluids,” Advances in Heat Transfer Vol. 43, Elsevier, 2011.

Conference Proceedings

  • Jourdan, A., Sarvadi, A.*, Siller, H. R., Bostanci, H., “Additively Manufactured Liquid-Cooled Heat Sink: Gyroid-Based Design, Fabrication and Testing,” ASME International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems (InterPACK 2022), Garden Grove, CA, October 25-27, 2022 (accepted)
  • Sarvadi, A.*, Bostanci, H., Kurwitz, C., Belancik, G., Jan D., “Preliminary Investigation of Microgravity Vortex Phase Separator for Liquid Amine CO2 Removal System,” 51st International Conference on Environmental Systems (ICES 2022), Saint Paul, MN, July 10-14, 2022.
  • Giron, B.*, Bostanci, H., Kurwitz, C., Belancik, G., Jan D., “Preliminary Tests with Variable Conductance Radiator for CO2 Deposition in Deep Space Transit,” 51st International Conference on Environmental Systems (ICES 2022), Saint Paul, MN, July 10-14, 2022.
  • Yaqub, M., Rahman, M., Pournorouz, Z., Bostanci, H., Ganta, D., Xu, Y., “Optimizing Energy Infrastructure of Autonomous Electric Vehicles,” Institute of Industrial and Systems Engineers (IISE) Annual Conference, New Orleans, LA, November 1-3, 2020. 
  • Bostanci, H., Shareef, M. A.*, Tuma, P.E., “Immersion Cooled ARM-Based Computer Clusters towards Low-Cost High-Performance Computing,” IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm 2020), Orlando, FL, July 21-23, 2020. https://doi.org/10.1109/ITherm45881.2020.9190494 
  • Bostanci, H., Nasrazadani, S., “Use of Direct Airside Economizers in Thermal Management of Data Centers: Opportunities and Challenges,” IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm 2019), Las Vegas, NV, May 28-31, 2019. https://doi.org/10.1109/ITHERM.2019.8757297 
  • Bostanci, H., Obuladinne, S.S.*, “Numerical Investigation of Spray Cooling-Based Thermal Management of Extreme Power Densities Using Anisotropic Composite Heat Spreaders,” IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm 2019), Las Vegas, NV, May 28-31, 2019. https://doi.org/10.1109/ITHERM.2019.8757351 
  • Heydari, M., Bagheri, A.*, Sadat, H., Bostanci, H., Nasrazadani, S., “Numerical Investigation on Simultaneous Effects of Surface Roughness and Variable Properties on Laminar Flow in Annular Tubes,” ASME International Mechanical Engineering Congress and Exposition (IMECE 2018), Pittsburgh, PA, November 9-15, 2018. https://doi.org/10.1115/IMECE2018-88288 
  • Bagheri, A.*, Mullins, W.C.*, Foster, P.R., Bostanci, H., “Adiabatic Analysis of Rotary Displacer Stirling Engine,” ASME International Mechanical Engineering Congress and Exposition (IMECE 2018), Pittsburgh, PA, November 9-15, 2018. https://doi.org/10.1115/IMECE2018-87758 
  • Bagheri, A.*, Williams, P.J.I.*, Foster, P.R., Bostanci, H., “Effect of Using Different Equations of State in the Analysis of Rotary Displacer Stirling Engine,” 2018 ASME Power and Energy Conference and Exhibition, Lake Buena Vista, FL, June 24-28, 2018. https://doi.org/10.1115/POWER2018-7221 
  • Yata, V.V.R.*, Bostanci, H., “Investigation of Spray Cooling Schemes for Dynamic Thermal Management,” IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm 2017), Orlando, FL, May 30-June 2, 2017. https://doi.org/10.1109/ITHERM.2017.7992560 
  • Sexton, A.J.*, Caparelli, P.*, Bostanci, H., Davis, J., “Failure Analysis of Spiral Tube Heat Exchanger,” 2017 ASEE-GSW Annual Conference, Richardson, TX, March 12-15, 2017.
  • Obuladinne, S.S.*, Bostanci, H., “Two-Phase Spray Cooling with Water/2-Propanol Binary Mixture: Investigation of Mass Diffusion Resistance,” ASME International Mechanical Engineering Congress and Exposition (IMECE 2016), Phoenix, AZ, November 11-17, 2016. https://doi.org/10.1115/imece2016-67514 
  • Kurwitz, R.C., Bostanci, H., Yang, X., Poston, J., Peddicord, K., “Systems Engineering Initiative- Undergraduate Education Enhancement in a Regional Education Network,” 3rd IAEA International Conference on Nuclear Knowledge Management, Vienna, Austria, November 7-11, 2016.
  • Bagheri, A.*, Kondapally, S., Bostanci, H., Foster, P.R., Yu, C., “Simulation and Visualization of an Innovative Rotary Displacer Stirling Engine Operation,” 2016 ASEE-GSW Annual Conference, Fort Worth, TX, March 6-8, 2016.
  • Harikrishnan, M.S., Hayes, R.G., Bostanci, H., Barbieri, E., “Control and Automation of a Heat Shrink Tubing Process,” 2016 ASEE-GSW Annual Conference, Fort Worth, TX, March 6-8, 2016.
  • Bostanci, H., Joshua, N.E.*, “Nucleate Boiling of Dielectric Liquids on Hydrophobic and Hydrophilic Surfaces,” ASME International Mechanical Engineering Congress and Exposition (IMECE 2015), Houston, TX, November 13-29, 2015. https://doi.org/10.1115/imece2015-53604 
  • Bagheri, A.*, Bostanci, H., Foster, P.R., “Preliminary Analysis of an Innovative Rotary Displacer Stirling Engine,” ASME International Mechanical Engineering Congress and Exposition (IMECE 2015), Houston, TX, November 13-29, 2015. https://doi.org/10.1115/IMECE2015-52455
  • Yaddanapudi, S.J.*, Bostanci, H., “Spray Cooling with HFC-134a and HFO-1234yf for Thermal Management of Automotive Power Electronics,” ASME International Mechanical Engineering Congress and Exposition (IMECE 2015), Houston, TX, November 13-29, 2015. https://doi.org/10.1115/imece2015-52312 
  • Joshua, N.E.*, Ajakumar, D.K.*, Bostanci, H., “Nucleate Boiling of Dielectric Liquids on Hydrophobic-Patterned Surfaces,” ASME International Mechanical Engineering Congress and Exposition (IMECE 2014), Quebec, Canada, November 14-20, 2014. https://doi.org/10.1115/IMECE2014-37513 
  • Yousefi-Darani, S., Joshua, N.E.*, Bostanci, H., Barbieri, E., “Automating a Heat Shrink Tubing Process,” 4th IAJC/ISAM Joint International Conference, Orlando, FL, September 25-27, 2014. ISBN 978-1-60643-379-9
  • Vretenar, N., Carson, T., Lucas, T., Newell, T., Latham, W. P., Peterson, P., Bostanci, H., Lindauer, J.J., Saarloos, B.A., Rini, D.P., “Cryogenic Yb:YAG Thin-Disk Laser,” 2011 SPIE Security + Defense, Volume 8187, Prague, Czech Republic, October 5, 2011. https://doi.org/10.1117/12.903731 
  • Wu, W., Bostanci, H., Chow, L.C., Hong, Y., Su, M., Kizito, J.P., “Jet Impingement Heat Transfer with Air-borne Nanoencapsulated Phase Change Materials,” 2011 MRS Spring Meeting, San Francisco, CA, April 25-29, 2011.
  • Bostanci, H., Van Ee, D., Saarloos, B.A, Rini, D.P., Chow, L.C, “Spray Cooling of Power Electronics Using High Temperature Coolant and Enhanced Surface,” 2009 IEEE Vehicle Power and Propulsion Conference, Dearborn, MI, September 7-10, 2009. https://doi.org/10.1109/VPPC.2009.5289793 
  • Bostanci, H., Rini, D.P., Kizito, J.P., Chow, L.C., “Hysteresis in Spray Cooling of Micro-Structured Surfaces,” ASME 2008 Heat Transfer Summer Conference, Jacksonville, FL, August 10-14, 2008. https://doi.org/10.1115/HT2008-56384 
  • Bostanci, H., Saarloos, B.A, Rini, D.P., Kizito, J.P., Chow, L.C., “Spray Cooling with Ammonia on Micro-Structured Surfaces,” IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm 2008), Orlando, FL, May 28-31, 2008. https://doi.org/10.1109/ITHERM.2008.4544282 
  • El-Genk, M.S., Bostanci, H., “Saturation Pool Boiling of HFE-7100 Dielectric Liquid in a Simulated Reduced Gravity,” 2002 Space Technology and Applications International Forum (STAIF 2002), Albuquerque, NM, February 13-17, 2002. https://doi.org/10.1063/1.1449723 
  • El-Genk, M.S., Bostanci, H., “Pool Boiling Experiments for HFE-7100 Dielectric Liquid,” Thermal Challenges in Next Generation Electronic Systems (THERMES), Santa Fe, NM, January 13-17, 2002. ISBN 90-77017-03-8
  • Bostanci, H., El-Genk, M.S., “Effects of Inclination Angle and Sub-cooling on Nucleate Boiling and Critical Heat Flux of HFE-7100,” 12th International Heat Transfer Conference (IHTC), Grenoble, France, August 18-23, 2002. http://dx.doi.org/10.1615/IHTC12.4520 

Selected Technical Reports

  • Seaver, T.*, Lira, E.*, De La Torre, J.*, Pezzulli, A.*, Giron, B.*, Bostanci, H., Kurwitz, C., “Thermal Radiator for CO2 Deposition in Deep Space Transit,” NASA Moon-to-Mars Exploration Systems & Habitation (X-Hab) Academic Innovation Challenge, 2021.
  • Sarvadi, A.*, Whitehead, H.*, Primo, F.*, Giron, B.*, Frease, N.*, Bostanci, H., Kurwitz, C., “Microgravity Gas/Liquid Separator for the CO2 Revitalization System,” NASA Exploration Systems & Habitation (X-Hab) Academic Innovation Challenge, 2020.
  • Bostanci, H., Obuladinne, S.S.*, “Spray Cooling System,” American Science and Engineering, Inc. (AS&E), 2015.
  • Huddle-Lindauer, J.J., Bostanci, H., Van Ee, D., Saarloos, B.A., Rini, D.P., “Liquid Nitrogen Spray Cooling for Cryogenic Solid State Lasers,” U.S. Air Force SBIR PIII, 2010.
  • Bostanci, H., Huddle-Lindauer, J.J., Saarloos, B.A., Rini, D.P., “Two-Phase Thermal Management Technology for Aerospace Application: Spray Cooled Diode Array Package Demonstration,” U.S. Air Force SBIR PIII, 2010.
  • Bostanci, H., Van Ee, D., Huddle-Lindauer, J.J., Saarloos, B.A., Rini, D.P., “Two-Phase Thermal Management Technology for Aerospace Application: Evaporative Spray Cooling for High Heat Flux Sources,” U.S. Air Force SBIR PIII, 2009.
  • Bostanci, H., Rini, D.P., “Passive Thermal Management System for High-Temperature Military Aircraft Actuation Systems,” U.S. Air Force SBIR PII, 2008.
  • Bostanci, H., Rini, D.P., “Innovative Two-Phase Cooling Approach for Full Authority Digital Engine Control (FADEC),” U.S. Air Force SBIR PI, 2008.
  • Rini, D.P., Bostanci, H., Saarloos, B.A., Huddle-Lindauer, J.J., Carman, B.G., “Compact and Efficient Cooling Techniques for High Energy Solid-State Lasers,” Dept. of Defense, Defense Advanced Research Projects Agency (DARPA) SBIR PII, 2007.