Full List of Refereed Journal Publications

2024
  1. A. Sharma, A. Gumaste, P. Agrawal, S. Thapliyal, S. Gupta, R.S. Haridas, B. A McWilliams, K. C Cho, R.S. Mishra, Strength-conductivity synergy via lean alloy design: A study on novel solid stir extrusion of an Al-2Cu-0.1 Nb-0.15 Zr (∼ wt.%) alloy, Journal of Alloys and Compounds, 976, 2024, 173082.
  2. B. Mondal, S. Sinha, J. Reed, H.S. Lee, K.J. Doherty, R.S. Mishra, Effect of backing plate on microstructure and properties of friction stir welded 2195-O alloy, Scripta Materialia 241, 2024, 115899.
  3. P. Agrawal, C.H. Shiau, A. Sharma, Z. Hu, M. Dubey, Y. Lu, L. Shao, R. Prabhakaran, Y. Wu, R.S. Mishra, Ion irradiation and examination of Additive friction stir deposited 316 stainless steel, Materials & Design, 2024, 112730.
  4. J. Shen, W. Zhang, J.G. Lopes, Y. Pei, Z. Zeng, E. Maawad, N. Schell, A.C. Baptista, R.S. Mishra, J.P. Oliveira, Evolution of microstructure and deformation mechanisms in a metastable Fe42Mn28Co10Cr15Si5 high entropy alloy: A combined in-situ synchrotron X-ray diffraction and EBSD analysis, Materials & Design 238, 2024, 112662.
  5. A. Sharma, R.S. Haridas, P. Agrawal, A. Gumaste, T. Scharf, K. Kandasamy, R.S. Mishra, Novel SolidStir extrusion technology for enhanced conductivity cable manufacturing via in-situ exfoliation of graphite to graphene, Materials & Design 238, 2024, 112643.
  6. A. Dhal, S. Thapliyal, P. Agrawal, A. Roy, A. Sharma, R.S. Mishra, E. Faierson, Multimodal and multiscale strengthening mechanisms in Al-Ni-Zr-Ti-Mn alloy processed by laser powder bed fusion additive manufacturing, Materials & Design 237, 2024, 112602.
2023
  1. M. Soltani, S. Ferdousi, R.S. Haridas, R.S. Mishra, Y. Jiang, A Crystal Plasticity Finite Element—Machine Learning Combined Approach for Phase Transformation Prediction in High Entropy Alloy, International Journal of Applied Mechanics, 2023, 2450024.
  2. S. Jha, R.S. Mishra, S. Mukherjee, Phase-Specific Damage Tolerance of a Eutectic High Entropy Alloy, Entropy 25 (12), 2023, 1604.
  3. J. Weiss, D.J. Savage, S.C. Vogel, B.A. McWilliams, R.S. Mishra, M. Knezevic, Evolution of microstructure and strength of a high entropy alloy undergoing the strain-induced martensitic transformation, Materials Science and Engineering: A 887, 2023, 145754.
  4. R.S. Mishra, H.Z. Yu, Friction Stir Based Solid-State Additive Manufacturing, JOM 75 (10), 2023, 4182-4184.
  5. A. Gumaste, A. Dhal, P. Agrawal, R.S. Haridas, V.K. Vasudevan, D. Weiss, R.S. Mishra, A novel approach for enhanced mechanical properties in solid-state additive manufacturing by additive friction stir deposition using thermally stable Al-Ce-Mg alloy, JOM 75 (10), 2023, 4185-4198.
  6. R.S. Haridas, A. Gumaste, P. Varshney, B.R. Manu, K. Kandasamy, N. Kumar, R.S. Mishra,  SolidStir Additive Manufacturing: A Novel Deformation-Based Additive Manufacturing Using Friction Stir Technology, JOM 75 (10), 2023, 4231-4241.
  7. S. Gaddam, R.S. Haridas, D. Tammana, C. Sanabria, C.J. Lammi, D. Berman, R.S. Mishra, Double-sided friction stir welding of Nitronic-40 stainless steel for application in tokamak devices, Journal of Materials Science & Technology 159, 2023, 170-183.
  8. S. Gaddam, A.K. Behera, N. Arai, Q. Zhang, R.S. Mishra, Effect of milling time and sintering temperature on the microstructure and binder distribution of spark plasma sintered NbC-Ni cermets, International Journal of Refractory Metals and Hard Materials 115, 2023, 106323.
  9. J.G. Lopes, P. Agrawal, J. Shen, N. Schell, R.S. Mishra, J.P. Oliveira, Evolution of microstructure and mechanical properties in gas tungsten arc welded dual-phase Fe50Mn30Co10Cr10 high entropy alloy, Materials Science and Engineering: A 878, 2023, 145233.
  10. J. Harris, D. Popov, A. Roy, R. Mishra, M. Young, Effect of V and Cu on Phase Stability of FeMnCrCoSi High Entropy Alloys Under High Pressure Loading Using Powder Samples, Bulletin of the American Physical Society 68, 2023.
  11. R.S. Mishra, S. Gupta, Microstructural engineering through high enthalpy states: implications for far-from-equilibrium processing of structural alloys, Frontiers in Metals and Alloys 2, 2023, 1135481.
  12. A Dhal, RS Haridas, P Agrawal, S Gupta, R.S. Mishra, Mapping hierarchical and heterogeneous micromechanics of a transformative high entropy alloy by nanoindentation and machine learning augmented clustering, Materials & Design 230, 2023, 111957.
  13. P. Agrawal, S. Thapliyal, P. Agrawal, A. Dhal, R.S. Haridas, S. Gupta, R.S. Mishra, Additive manufacturing of a metastable high entropy alloy: Metastability engineered microstructural control via process variable driven elemental segregation, Materials Science and Engineering: A, 2023, 144938.
  14. R.S. Haridas, A. Gumaste, P. Agrawal, S. Yadav, R.S. Mishra, Favorable property integration in high entropy alloys via dissimilar friction stir welding: a case study using Al0.3CoCrFeNi and Fe38.5Co20Mn20Cr15Si5Cu1.5 HEAs, Materials Today Communications, 35, 2023, 105822.
  15. J. Shen, J.G. Lopes, Z. Zeng, Y.T. Choi, E. Maawad, N. Schell, H.S. Kim, R.S. Mishra, J.P. Oliveira, Deformation behavior and strengthening effects of an eutectic AlCoCrFeNi2. 1 high entropy alloy probed by in-situ synchrotron X-ray diffraction and post-mortem EBSD, Materials Science and Engineering: A 872, 2023, 144946
  16. A. Gumaste, R.S. Haridas, S. Gupta, S. Gaddam, K. Kandasamy, B.A. McWilliams, K.C. Cho, R.S. Mishra, Solid Stir Extrusion: Innovating friction stir technology for continuous extrusion process, Journal of Materials Processing Technology, 316, 2023, 117952.
  17. S. Gaddam, M.S.K.K.Y. Nartu, A. Chesetti, S.A. Mantri, R.S. Mishra, N.B. Dahotre, R. Banerjee, Hierarchical phase evolution during direct laser deposition of an in-situ Ni-NbC composite, Scripta Materialia 226, 2023, 115225.
  18. J. Shen, P. Agrawal, T.A. Rodrigues, J.G. Lopes, N. Schell, J. He, Z. Zeng, R.S. Mishra, J.P. Oliveira, Microstructure evolution and mechanical properties in a gas tungsten arc welded Fe42Mn28Co10Cr15Si5 metastable high entropy alloy, Materials Science and Engineering: A, 867, 2023, 144722.
  19. L. O’Toole, R.S. Haridas, R.S. Mishra, F. Fang, Determination of Johnson-Cook plasticity model parameters for CoCrMo alloy, Materials Today Communications 34, 2023, 105128.
  20. A. Dhal, P. Agrawal, R.S. Haridas, S. Gaddam, A. Sharma, D. Parganiha, R.S. Mishra, H. Kawanaka, S. Matsushita, Y. Yasuda, S.H.C. Park, W. Yuan, High-Throughput Investigation of Multiscale Deformation Mechanism in Additively Manufactured Ni Superalloy, Metals 13 (2), 2023,420.
  21. P. Agrawal, S. Gupta, A. Dhal, R. Prabhakaran, L. Shao, R.S. Mishra, Irradiation response of innovatively engineered metastable TRIP high entropy alloy, Journal of Nuclear Materials 574, 2023, 154217.
  22. R.S. Haridas, P. Agrawal, S. Thapliyal, P. Agrawal, A. Dhal, S. Shukla, L. Zhou, Y. Sohn, R.S. Mishra, Synergy of tensile strength and high cycle fatigue properties in a novel additively manufactured Al-Ni-Ti-Zr alloy with a heterogeneous microstructure, Additive Manufacturing 62, 2023, 103380.
  23. P. Agrawal, R.S. Haridas, S. Yadav, S. Thapliyal, A. Dhal, R.S. Mishra, Additive friction stir deposition of SS316: Effect of process parameters on microstructure evolution, Materials Characterization 195, 2023, 112470.
  24. P. Agrawal, R.S. Haridas, P. Agrawal, R.S. Mishra, Deformation based additive manufacturing of a metastable high entropy alloy via Additive friction stir deposition, Additive Manufacturing 60, 2023, 103282.
2022
  1. S. Yadav, Q. Zhang, P. Agrawal, R.S. Haridas, C. Morphew, A. Behera, Z. Mahbooba, J. Gong, R.S. Mishra Effect of ceramic-binder interface on the mechanical properties of TiB2-HEA composites, Materials Science and Engineering: A, 857, 2022, 144059.
  2. J. Shen, P. Agrawal, T.A. Rodrigues, J.G. Lopes, N. Schell, Z. Zeng, R.S. Mishra, J.P. Oliveira, Gas tungsten arc welding of as-cast AlCoCrFeNi2.1 eutectic high entropy alloy, Materials & Design 223, 2022, 111176.
  3. A. Dhal, S. Thapliyal, S. Gaddam, P. Agrawal, R.S. Mishra, Multiscale hierarchical and heterogeneous mechanical response of additively manufactured novel Al alloy investigated by high-resolution nanoindentation mapping, Scientific Reports 12 (1), 2022, 18344.
  4. Gaddam, S., Haridas, R.S., Sanabria, C., Tammana, D., Berman, D., Mishra, R.S., Friction stir welding of SS 316 LN and Nitronic 50 jacket sections for application in superconducting fusion magnet systems, 221, 2022, Materials and Design, 110949.
  5. Gupta, S., Haridas, R.S., Agrawal, P., Mishra, R.S., Doherty, K.J., Influence of welding parameters on mechanical, microstructure, and corrosion behavior of friction stir welded Al 7017 alloy, 846, 2022, Materials Science and Engineering A, 143303.
  6. Varshney, P., Mishra, R.S., Kumar, N., Understanding the nature of passivation film formed during corrosion of Fe39Mn20Co20Cr15Si5Al1 high entropy alloy in 3.5 wt% NaCl solution, 904, 2022, Journal of Alloys and Compounds, 164100.
  7. Haridas, R.S., Agrawal, P., Yadav, S., Agrawal, P., Gumaste, A., Mishra, R.S., Work hardening in metastable high entropy alloys: A modified five-parameter model, 18, 2022, Journal of Materials Research and Technology, 3358-3372.
  8. Agrawal, P., Gupta, S., Shukla, S., Nene, S.S., Thapliyal, S., Toll, M.P., Mishra, R.S., Role of Cu addition in enhancing strength-ductility synergy in transforming high entropy alloy, 215, 2022, Materials and Design, 110487.
  9. Y Jin, X Wang, EA Fox, Z Xie, A Neogi, RS Mishra, T Wang, Numerically Trained Ultrasound AI for Monitoring Tool Degradation, Advanced Intelligent Systems 4 (5), 2022, 2100215.
  10. H. Hyer, L. Zhou, S. Park, T. Huynh, A. Mehta, S. Thapliyal, R.S Mishra, Y. Sohn, Elimination of extraordinarily high cracking susceptibility of aluminum alloy fabricated by laser powder bed fusion, Journal of Materials Science & Technology, 103, 2022, 50-58.
  11. S. Bhowmik, J. Zhang, S.C. Vogel, S.S. Nene, R.S. Mishra, B.A. McWilliams, M. Knezevic, Effects of plasticity-induced martensitic transformation and grain refinement on the evolution of microstructure and mechanical properties of a metastable high entropy alloy, Journal of Alloys and Compounds, 891, 2022, 161871.
  12. R.S. Mishra, R.S. Haridas, P. Agrawal, Friction stir-based additive manufacturing, Science and Technology of Welding and Joining, 27, 2022, 141-165.
  13. E. Polatidis, S. Shukla, J. Čapek, S. Van Petegem, N. Casati, R.S. Mishra, Unveiling the interplay of deformation mechanisms in a metastable high entropy alloy with tuned composition using synchrotron X-ray diffraction, Materials Today Communications, 30, 2022, 103155.
  14. P.D. Awasthi, P. Agrawal, R.S. Haridas, R.S. Mishra, M.T. Stawovy, S. Ohm, A. Imandoust, Mechanical properties and microstructural characteristics of additively manufactured C103 niobium alloy, Materials Science and Engineering: A, 831, 2022, 142183.
  15. Y. Jin, X. Wang, E.A. Fox, Z. Xie, A. Neogi, R.S. Mishra, T. Wang, Numerically Trained Ultrasound AI for Monitoring Tool Degradation, Advanced Intelligent Systems, 2022, 2100215.
  16. AT Clare, RS Mishra, M Merklein, H Tan, I Todd, L Chechik, J Li, M Bambach, Alloy design and adaptation for additive manufacture, Journal of Materials Processing Technology, 299, 2022, 117358.
  17. Yuqi Jin, Tianhao Wang, Arkadii Krokhin, Tae-Youl Choi, Rajiv S Mishra, Arup Neogi, Ultrasonic elastography for nondestructive evaluation of dissimilar material joints, Journal of Materials Processing Technology, 299, 2022, 117301.
2021
  1. Saideep Muskeri, Bharat Gwalani, Shristy Jha, Anqi Yu, Philip A Jannotti, Ravi Sankar Haridas, Brian E Schuster, Jeffrey T Lloyd, Rajiv S Mishra, Sundeep Mukherjee, Excellent ballistic impact resistance of Al0.3CoCrFeNi multi-principal element alloy with unique bimodal microstructure, Scientific Reports, 11, 2021, 1-12.
  2. Priyanshi Agrawal, Ravi Sankar Haridas, Surekha Yadav, Saket Thapliyal, Supreeth Gaddam, Ravi Verma, Rajiv S Mishra, Processing-structure-property correlation in additive friction stir deposited Ti-6Al-4V alloy from recycled metal chips, Additive Manufacturing, 47, 2021, 102259.
  3. S. Gupta, P. Agrawal, S.S. Nene, R.S. Mishra, Friction stir welding of γ-fcc dominated metastable high entropy alloy: Microstructural evolution and strength, Scripta Materialia, 204, 2021, 114161.
  4. S. Thapliyal, P. Agrawal, P. Agrawal, S.S. Nene, R.S. Mishra, B.A. McWilliams, K.C. Cho, Segregation engineering of grain boundaries of a metastable Fe-Mn-Co-Cr-Si high entropy alloy with laser-powder bed fusion additive manufacturing, Acta Materialia, 219, 2021, 117271.
  5. B. Gwalani, S. Dasari, A. Sharma, V. Soni, S. Shukla, A. Jagetia, P. Agrawal, R.S. Mishra, R. Banerjee, High Density of Strong yet Deformable Intermetallic Nanorods Leads to an Excellent Room Temperature Strength-Ductility Combination in a High Entropy Alloy, Acta Materialia, 2021, 117234.
  6. P. Agrawal, R.S. Haridas, S. Thapliyal, S. Yadav, R.S. Mishra, B.A. McWilliams, K.C. Cho, Metastable high entropy alloys: An excellent defect tolerant material for additive manufacturing, Materials Science and Engineering: A, 826, 2021, 142005.
  7. S. Yadav, Q. Zhang, A. Behera, R.S. Haridas, P. Agrawal, J. Gong, R.S. Mishra, Role of binder phase on the microstructure and mechanical properties of a mechanically alloyed and spark plasma sintered WC-FCC HEA composites, Journal of Alloys and Compounds, 877, 2021, 160265.
  8. S.S. Nene, P. Agrawal, M. Frank, A. Watts, S. Shukla, C. Morphew, A. Chesetti, J.S. Park, R.S. Mishra, Transformative high entropy alloy conquers the strength-ductility paradigm by massive interface strengthening, Scripta Materialia, 203, 2021, 114070.
  9. A. Sittiho, M. Bhattacharyya, J. Graves, S.S. Nene, R.S. Mishra, I. Charit, Friction stir processing of a high entropy alloy Fe42Co10Cr15Mn28Si5 with transformative characteristics: Microstructure and mechanical properties, Materials Today Communications, 28, 2021, 102635.
  10. M. Frank, S.S. Nene, Y. Chen, S. Thapliyal, S. Shukla, K. Liu, S. Sinha, T. Wang, M.J. Frost, K. An, R.S. Mishra, Direct evidence of the stacking fault-mediated strain hardening phenomenon, Applied Physics Letters, 119, 2021, 081906.
  11. R.S. Haridas, P. Agrawal, R.S. Mishra, Modeling the work hardening behavior in metastable high entropy alloys, Materials Science and Engineering: A, 823, 2021, 141778.
  12. S. Thapliyal, S. Shukla, L. Zhou, H. Hyer, P. Agrawal, P. Agrawal, M. Komarasamy, Y. Sohn, R.S. Mishra, Design of heterogeneous structured Al alloys with wide processing window for laser-powder bed fusion additive manufacturing, Additive Manufacturing, 42, 2021, 102002.
  13. R.S. Mishra, S. Thapliyal, Design approaches for printability-performance synergy in Al alloys for laser-powder bed additive manufacturing, Materials & Design, 204, 2021, 109640.
  14. R.S. Haridas, P. Agrawal, S. Thapliyal, S. Yadav, R.S. Mishra, B.A. McWilliams, K.C. Cho, Strain rate sensitive microstructural evolution in a TRIP assisted high entropy alloy: Experiments, microstructure and modeling, Mechanics of Materials, 156, 2021, 103798.
  15. R.S. Mishra, R.S. Haridas, P. Agrawal, High Entropy Alloys – Tunability of Deformation Mechanisms Through Integration of Compositional and Microstructural Domains, Materials Science and Engineering: A, 2021, 141085.
  16. R.S. Mishra, S.S. Nene, Some Unique Aspects of Mechanical Behavior of Metastable Transformative High Entropy Alloys, Metallurgical and Materials Transactions A, 52, 2021, 889-896.
  17. H.Z. Yu, R.S. Mishra, Additive friction stir deposition: a deformation processing route to metal additive manufacturing, Materials Research Letters 9 (2), 2021, 71-83.
  18. T. Wang, S. Shukla, B. Gwalani, S. Sinha, S. Thapliyal, M. Frank, R.S. Mishra, Co-introduction of precipitate hardening and TRIP in a TWIP high-entropy alloy using friction stir alloying, Scientific reports 11 (1), 2021, 1-10.
  19. P. Agrawal, S. Gupta, S. Thapliyal, S. Shukla, R.S. Haridas, R.S. Mishra, Additively manufactured novel Al-Cu-Sc-Zr alloy: Microstructure and mechanical properties, Additive Manufacturing 37, 2021, 101623.
  20. P. Agrawal, S. Shukla, S. Thapliyal, P. Agrawal, S.S. Nene, R.S. Mishra, B.A. McWilliams, K.C. Cho, Microstructure–Property Correlation in a Laser Powder Bed Fusion Processed High‐Strength AF‐9628 Steel, Advanced Engineering Materials 23 (1), 2021, 2000845.
2020
  1. M Frank, SS Nene, Y Chen, B Gwalani, EJ Kautz, A Devaraj, K An, RS Mishra, Correlating work hardening with co-activation of stacking fault strengthening and transformation in a high entropy alloy using in-situ neutron diffraction, Scientific reports 10 (1), 2020, 1-10.
  2. P Agrawal, S Shukla, S Gupta, P Agrawal, RS Mishra, Friction stir gradient alloying: A high-throughput method to explore the influence of V in enabling HCP to BCC transformation in a γ-FCC dominated high entropy alloy, Applied Materials Today 21, 2020, 100853.
  3. S Thapliyal, SS Nene, P Agrawal, T Wang, C Morphew, RS Mishra, BA McWilliams, KC Cho, Damage-tolerant, corrosion-resistant high entropy alloy with high strength and ductility by laser powder bed fusion additive manufacturing, Additive Manufacturing, 36, 2020, 101455.
  4. RS Mishra, SS Nene, M Frank, S Sinha, K Liu, S Shukla, Metastability driven hierarchical microstructural engineering: Overview of mechanical properties of metastable complex concentrated alloys, Journal of Alloys and Compounds, 842, 2020, 155625.
  5. RS Haridas, S Thapliyal, P Agrawal, RS Mishra, Defect-based probabilistic fatigue life estimation model for an additively manufactured aluminum alloy, Materials Science and Engineering: A, 798, 2020, 140082.
  6. K. Liu, S. S. Nene, M. Frank & R. S. Mishra, Effect of Strain Rate on Deformation Response of Metastable High Entropy Alloys Upon Friction Stir Processing, Metallurgical and Materials Transactions A, 51, (2020), 5043–5048.
  7. SS Nene, M Frank, P Agrawal, S Sinha, K Liu, S Shukla, RS Mishra, BA McWilliams, KC Cho, Microstructurally flexible high entropy alloys: Linkages between alloy design and deformation behavior, Materials & Design, 194, 2020, 108968.
  8. SS Nene, S Gupta, C Morphew, RS Mishra, Friction stir butt welding of a high strength Al-7050 alloy with a metastable transformative high entropy alloy, Materialia, 11, 2020, 100740.
  9. L Zhou, H Hyer, S Thapliyal, RS Mishra, B McWilliams, K Cho, Y Sohn, Process-Dependent Composition, Microstructure, and Printability of Al-Zn-Mg and Al-Zn-Mg-Sc-Zr Alloys Manufactured by Laser Powder Bed Fusion, Metallurgical and Materials Transactions A, 51, 2020, 3215–3227.
  10. S Muskeri, D Choudhuri, PA Jannotti, BE Schuster, JT Lloyd, RS Mishra, S Mukherjee, Ballistic Impact Response of Al0.1CoCrFeNi High‐Entropy Alloy, Advanced Engineering Materials, 2020, 2000124.
  11. S Shukla, T Wang, M Frank, P Agrawal, S Sinha, RA Mirshams, RS Mishra, Friction stir gradient alloying: A novel solid-state high throughput screening technique for high entropy alloys, Materials Today Communications 23, 2020, 100869.
  12. M Frank, Y Chen, SS Nene, S Sinha, K Liu, K An, RS Mishra, Investigating the deformation mechanisms of a highly metastable high entropy alloy using in-situ neutron diffraction, Materials Today Communications, 23, 2020, 100858.
  13. P Nelaturu, S Jana, RS Mishra, G Grant, BE Carlson, Effect of temperature on the fatigue cracking mechanisms in A356 Al alloy, Materials Science and Engineering: A, 780, 2020, 139175.
  14. SK Panigrahi, RS Mishra, RC Brennan, K Cho, Achieving extraordinary structural efficiency in a wrought magnesium rare earth alloy, Materials Research Letters 8 (4), 2020, 151-157.
  15. B Gwalani, T Wang, A Jagetia, S Gangireddy, S Muskeri, S Mukherjee, JT Lloyd, R Banerjee, RS Mishra, Dynamic Shear Deformation of a Precipitation Hardened Al0.7CoCrFeNi Eutectic High-Entropy Alloy Using Hat-Shaped Specimen Geometry, Entropy 22 (4), 2020, 431.
  16. T Wang, S Sinha, M Komarasamy, S Shukla, S Williams, RS Mishra, Ultrasonic spot welding of dissimilar Al 6022 and Al 7075 alloys, Journal of Materials Processing Technology 278, 2020, 116460.
  17. S Shukla, RS Mishra, Excellent high cyclic fatigue properties of a novel ultrafine-grained medium entropy alloy, Materials Science and Engineering: A 779, 2020, 139122.
  18. P Agrawal, S Thapliyal, SS Nene, RS Mishra, BA McWilliams, KC Cho, Excellent strength-ductility synergy in metastable high entropy alloy by laser powder bed additive manufacturing, Additive Manufacturing 32, 2020, 101098.
  19. S Thapliyal, M Komarasamy, S Shukla, L Zhou, H Hyer, S Park, Y Sohn, RS Mishra, An integrated computational materials engineering-anchored closed-loop method for design of aluminum alloys for additive manufacturing, Materialia 9, 2020, 100574.
  20. SS Nene, K Liu, S Sinha, M Frank, S Williams, RS Mishra, Superplasticity in fine grained dual phase high entropy alloy, Materialia 9, 2020, 100521.
  21. S Sinha, M Komarasamy, T Wang, RS Haridas, P Agrawal, S Shukla, P Agrawal, S Shukla, S Thapliyal, M Frank, RS Mishra, Notch-tensile behavior of Al0.1CrFeCoNi high entropy alloy, Materials Science and Engineering: A, 2020, 138918.
  22. S Sinha, SS Nene, M Frank, K Liu, RA Lebensohn, RS Mishra, Deformation mechanisms and ductile fracture characteristics of a friction stir processed transformative high entropy alloy, Acta Materialia 184, 2020, 164-178.
  23. D Choudhuri, SG Srinivasan, RS Mishra, Deformation of lamellar FCC-B2 nanostructures containing Kurdjumov-Sachs interfaces: Relation between interfacial structure and plasticity, International Journal of Plasticity 125, 2020, 191-209.
  24. S Balachandran, RS Mishra, D Banerjee, Friction stir processing of a metastable β titanium alloy in β and α+ β phase fields, Materials Science and Engineering: A 772, 2020, 138705.
  25. B Gwalani, D Choudhuri, K Liu, JT Lloyd, RS Mishra, R Banerjee, Interplay between single phase solid solution strengthening and multi-phase strengthening in the same high entropy alloy, Materials Science and Engineering: A771, 2020, 138620.
  26. RS Mishra, Hierarchically Structured Ultrafine Grained Magnesium Alloys, Magnesium Technology 2020, 2020,7-11.
  27. GR Argade, SK Panigrahi, RS Mishra, Aging response on the stress corrosion cracking behavior of wrought precipitation-hardened magnesium alloy, Journal of Materials Science 55 (3), 2020, 1216-1230.
2019
  1. D Choudhuri, S Shukla, PA Jannotti, S Muskeri, S Mukherjee, JT Lloyd, Rajiv S Mishra, Characterization of as-cast microstructural heterogeneities and damage mechanisms in eutectic AlCoCrFeNi2.1 high entropy alloy, Materials Characterization 158, 2019, 109955.
  2. D Choudhuri, PA Jannotti, S Muskeri, S Shukla, S Gangireddy, Sundeep Mukherjee, Brian E Schuster, Jeffrey T Lloyd, Rajiv S Mishra, Ballistic Response of a FCC-B2 Eutectic AlCoCrFeNi2.1 High Entropy Alloy, Journal of Dynamic Behavior of Materials 5 (4), 2019, 495-503.
  3. S Pathak, N Kumar, RS Mishra, PS De, Aqueous Corrosion Behavior of Cast CoCrFeMnNi Alloy, Journal of Materials Engineering and Performance 28 (10), 2019, 5970-5977.
  4. S Sinha, SS. Nene, M Frank, K Liu, P Agrawal, RS Mishra, On the evolving nature of c/a ratio in a hexagonal close-packed epsilon martensite phase in transformative high entropy alloys, 2019, Scientific Reports, 9, 13185.
  5. V Tungala, AK Dutt, D Choudhuri, RS Mishra, SA Tamirisakandala, Kyu C Cho, Raymond E Brennan, Friction Stir Processing of Beta C and Ti-185: A Unique Pathway to Engineer Microstructures for Exceptional Properties in β Titanium Alloys, 2019, Metallurgical and Materials Transactions A 50 (9), 4075-4084.
  6. T Wang, B Gwalani, S Shukla, M Frank, RS Mishra, Development of in situ composites via reactive friction stir processing of Ti–B4C system, 2019, Composites Part B: Engineering 172, 54-60.
  7. B Gwalani, S Gangireddy, S Shukla, CJ Yannetta, SG Valentin, RS Mishra, Rajarshi Banerjee, Compositionally Graded High Entropy Alloy with a Strong Front and Ductile Back, 2019, Materials Today Communications, 100602.
  8. T Wang, H Sidhar, RS Mishra, Y Hovanski, P Upadhyay, B Carlson, Evaluation of intermetallic compound layer at aluminum/steel interface joined by friction stir scribe technology, 2019, Materials & Design 174, 107795.
  9. M Komarasamy, S Shukla, S Williams, K Kandasamy, S Kelly, RS Mishra, Microstructure, fatigue, and impact toughness properties of additively manufactured nickel alloy 718, 2019, Additive Manufacturing, 28, 661-675.
  10. K Liu, B Gwalani, M Komarasamy, S Shukla, T Wang, RS Mishra, Effect of nano-sized precipitates on the fatigue property of a lamellar structured high entropy alloy, 2019, Materials Science and Engineering: A, 760, 225-230.
  11. K Liu, SS Nene, M Frank, S Sinha, RS Mishra, Extremely high fatigue resistance in an ultrafine grained high entropy alloy, 2019, Applied Materials Today 15, 525-530.
  12. S Sinha, SS Nene, M Frank, K Liu, RS Mishra, BA McWilliams, KC Cho, Revealing the microstructural evolution in a high entropy alloy enabled with transformation, twinning and precipitation, 2019, Materialia 6, 100310.
  13. SS Nene, M Frank, K Liu, S Sinha, RS Mishra, BA McWilliams, KC Cho, Corrosion-resistant high entropy alloy with high strength and ductility, 2019, Scripta Materialia 166, 168-172.
  14. B Gwalani, S Gorsse, V Soni, M Carl, N Ley, J Smith, AV Ayyagari, Yufeng Zheng, Marcus Young, Rajiv S Mishra, R Banerjee, Role of copper on L12 precipitation strengthened fcc based high entropy alloy, 2019, Materialia 6, 100282.
  15. S Pandya, RS Mishra, A Arora, Channel formation during friction stir channeling process—A material flow study using X-Ray micro-computed tomography and optical microscopy, 2019, Journal of Manufacturing Processes 41, 48-55.
  16. S Sinha, RA Mirshams, T Wang, SS Nene, M Frank, K Liu, RS Mishra, Nanoindentation behavior of high entropy alloys with transformation-induced plasticity, 2019, Scientific Reports 9 (1), 6639.
  17. B Gwalani, S Gangireddy, Y Zheng, V Soni, RS Mishra, R Banerjee, Influence of ordered L12 precipitation on strain-rate dependent mechanical behavior in a eutectic high entropy alloy, 2019, Scientific reports 9 (1), 6371.
  18. S Sinha, M Komarasamy, S Thapliyal, B Gwalani, S Shukla, KA Darling, Rajiv S Mishra, Immiscible nanostructured copper-aluminum-niobium alloy with excellent precipitation strengthening upon friction stir processing and aging, 2019, Scripta Materialia 164, 42-47.
  19. GR Argade, SS Joshi, AV Ayyagari, S Mukherjee, RS Mishra, NB Dahotre Tribocorrosion performance of laser additively processed high-entropy alloy coatings on aluminum, 2019, Applied Physics A 125 (4), 272.
  20. S Gangireddy, D Whitaker, RS Mishra, Significant Contribution to Strength Enhancement from Deformation Twins in Thermomechanically Processed Al0.1CoCrFeNi Microstructures, 2019, Journal of Materials Engineering and Performance 28 (3), 1661-1667.
  21. S Gangireddy, B Gwalani, R Banerjee, RS Mishra, High Strain Rate Response of Al0.7CoCrFeNi High Entropy Alloy: Dynamic Strength Over 2 GPa from Thermomechanical Processing and Hierarchical Microstructure, 2019, Journal of Dynamic Behavior of Materials 5 (1), 1-7.
  22. M Komarasamy, T Wang, K Liu, L Reza-Nieto, RS Mishra, Hierarchical multi-phase microstructural architecture for exceptional strength-ductility combination in a complex concentrated alloy via high-temperature severe plastic deformation, 2019, Scripta Materialia 162, 38-43.
  23. B Gwalani, S Gorsse, D Choudhuri, Y Zheng, RS Mishra, R Banerjee, Tensile yield strength of a single bulk Al0.3CoCrFeNi high entropy alloy can be tuned from 160 MPa to 1800 MPa, 2019, Scripta Materialia 162, 18-23.
  24. T Wang, S Shukla, B Gwalani, M Komarasamy, L Reza-Nieto, RS Mishra, Effect of reactive alloy elements on friction stir welded butt joints of metallurgically immiscible magnesium alloys and steel, 2019, Journal of Manufacturing Processes 39, 138-145.
  25. S Gangireddy, B Gwalani, K Liu, EJ Faierson, RS Mishra, Microstructure and mechanical behavior of an additive manufactured (AM) WE43-Mg alloy, 2019, Additive Manufacturing, 26, 53-64.
  26. W Cai, G Daehn, A Vivek, J Li, H Khan, RS Mishra, M Komarasamy, A state-of-the-art review on solid-state metal joining, 2019, Journal of Manufacturing Science and Engineering 141 (3), 031012.
  27. T Wang, H Sidhar, RS Mishra, Y Hovanski, P Upadhyay, B Carlson, Effect of hook characteristics on the fracture behaviour of dissimilar friction stir welded aluminium alloy and mild steel sheets, 2019, Science and Technology of Welding and Joining 24 (2), 178-184.
  28. T Wang, S Shukla, M Frank, RS Mishra, Evolution of bond formation and fracture process of ultrasonic spot welded dissimilar materials, 2019, Science and Technology of Welding and Joining 24 (2), 171-177.
  29. GR Argade, S Sanders, G Mohandass, A Alsaleh, F D’Souza, TD Golden, RS Mishra, Corrosion Inhibition Study of Mg-Nd-Y High Strength Magnesium Alloy Using Organic Inhibitor, 2019, Journal of Materials Engineering and Performance, 28, 852-862.
  30. D Choudhuri, B Gwalani, S Gorsse, M Komarasamy, SA Mantri, SG Srinivasan, RS Mishra, R Banerjee, Enhancing strength and strain hardenability via deformation twinning in fcc-based high entropy alloys reinforced with intermetallic compounds, 2019, Acta Materialia 165, 420-430.
  31. S Gangireddy, M Komarasamy, EJ Faierson, RS Mishra High strain rate mechanical behavior of Ti- 6Al-4V octet lattice structures additively manufactured by selective laser melting (SLM), 2019, Materials Science and Engineering: A, 745, 231-239.
  32. T Wang, S Shukla, M Komarasamy, K Liu, RS Mishra, Towards heterogeneous AlxCoCrFeNi high entropy alloy via friction stir processing, 2019, Materials Letters 236, 472-475.
  33. D Choudhuri, S Shukla, B Gwalani, R Banerjee, RS Mishra Deformation induced intermediate metastable lattice structures facilitate ordered B2 nucleation in a fcc-based high entropy alloy, 2019, Materials Research Letters 7 (1), 40-46.
  34. S Gangireddy, B Gwalani, V Soni, R Banerjee, RS Mishra, Contrasting mechanical behavior in precipitation hardenable AlXCoCrFeNi high entropy alloy microstructures: single phase FCC vs. dual phase FCC-BCC, 2019, Materials Science and Engineering: A 739, 158-166.
  35. Aniket K. Dutt, Bharat Gwalani, Vedavyas Tungala, Matthew Carl, Rajiv S. Mishra, Sesh A. Tamirisakandala, Marcus L. Young, Kyu C. Cho, and Raymond E. Brennan, A novel nano-particle strengthened titanium alloy with exceptional specific strength, Sci Rep. 2019; 9: 11726. doi: 10.1038/s41598-019-48139-8
  36. Deep Choudhuri, Philip A Jannotti, Saideep Muskeri, Shivakant Shukla, Sindhura Gangireddy, Sundeep Mukherjee, Brian E Schuster, Jeffrey T Lloyd, Rajiv S Mishra, Ballistic Response of a FCC-B2 Eutectic AlCoCrFeNi2.1 High Entropy Alloy, 2019, Journal of Dynamic Behavior of Materials, 1-9.
  37. AA Jalbuena, Nicholas Ury, Jaewan Bae, Christopher Faraj, Kailey Hanan, Shahan Kasnakjian, JK Logier, RS Mishra, X Wang, JC Earthman, V Ravi, Corrosion of Al0.1CoCrFeNi High Entropy Alloy in a Molten Eutectic Salt, 2019, Journal of The Electrochemical Society, 166, C3488-C3492.
  38. S Sinha, SS Nene, M Frank, K Liu, RS Mishra, BA McWilliams, KC Cho, Microstructural Evolution and Deformation Behavior of Ni-Si-and Co-Si-Containing Metastable High Entropy Alloys, 2019, Metallurgical and Materials Transactions A, 50, 179-190.
  39. K Liu, M Komarasamy, B Gwalani, S Shukla, RS Mishra, Fatigue behavior of ultrafine grained triplex Al0.3CoCrFeNi high entropy alloy, 2019, Scripta Materialia 158, 116-120.

2018

  1. S Shukla, D Choudhuri, T Wang, K Liu, R Wheeler, S Williams, B Gwalani, RS Mishra, Hierarchical features infused heterogeneous grain structure for extraordinary strength-ductility synergy, 2018, Materials Research Letters 6 (12), 676-682.
  2. SS Nene, S Sinha, M Frank, K Liu, RS Mishra, BA McWilliams, KC Cho, Unexpected strength–ductility response in an annealed, metastable, high-entropy alloy, 2018, Applied Materials Today 13, 198-206.
  3. S Mridha, M Komarasamy, S Bhowmick, R Mishra, S Mukherjee, Small-Scale Plastic Deformation of Nanocrystalline High Entropy Alloy, 2018, Entropy 20 (11), 889.
  4. T Wang, M Komarasamy, K Liu, RS Mishra, Friction stir butt welding of strain-hardened aluminum alloy with high strength steel, 2018, Materials Science and Engineering: A 737, 85-89.
  5. K Liu, SS Nene, M Frank, S Sinha, RS Mishra, Metastability-assisted fatigue behavior in a friction stir processed dual-phase high entropy alloy, 2018, Materials Research Letters 6 (11), 613-619.
  6. S Gangireddy, B Gwalani, RS Mishra, Grain size dependence of strain rate sensitivity in a single phase FCC high entropy alloy Al0.3CoCrFeNi, 2018, Materials Science and Engineering: A 736, 344-348.
  7. M Komarasamy, S Shukla, N Ley, K Liu, K Cho, B McWilliams, R Brennan, ML Young, RS Mishra, A novel method to enhance CSL fraction, tensile properties and work hardening in complex concentrated alloys―Lattice distortion effect, 2018, Materials Science and Engineering: A 736, 383-391.
  8. A Fortier, N Kumar, M Komarasamy, RS Mishra, Feasibility Study of Compaction and Sintering of Commercially Pure Titanium using Friction Stir Processing, 2018, International Journal of Current Engineering and Technology 8 (3), 593-600.
  9. D Choudhuri, M Komarasamy, V Ageh, RS Mishra, Investigation of plastic deformation modes in Al0.1CoCrFeNi high entropy alloy, 2018, Materials Chemistry and Physics, 217, 308-314.
  10. S Gangireddy, EJ Faierson, RS Mishra, Influences of Post-processing, Location, Orientation, and Induced Porosity on the Dynamic Compression Behavior of Ti–6Al–4V Alloy Built Through Additive Manufacturing, 2018, Journal of Dynamic Behavior of Materials, 1-11.
  11. K Liu, M Komarasamy, B Gwalani, S Shukla, RS Mishra, Fatigue behavior of ultrafine grained triplex Al0.3CoCrFeNi high entropy alloy, 2018, Scripta Materialia 158, 116-120.
  12. P Sahlot, SS Nene, M Frank, RS Mishra, A Arora, Towards attaining dissimilar lap joint of CuCrZr alloy and 316L stainless steel using friction stir welding, 2018, Science and Technology of Welding and Joining 23 (8), 715-720.
  13. S Shukla, T Wang, S Cotton, RS Mishra, Hierarchical microstructure for improved fatigue properties in a eutectic high entropy alloy, 2018, Scripta Materialia 156, 105-109.
  14. Wang, T., Komarasamy, M., Shukla, S., Mishra, R.S., Simultaneous enhancement of strength and ductility in an AlCoCrFeNi2.1 eutectic high-entropy alloy via friction stir processing, 2018, Journal of Alloys and Compounds, 766, 312-317.
  15. Sittiho, A., Tungala, V., Charit, I., Mishra, R.S., Microstructure, mechanical properties and strengthening mechanisms of friction stir welded Kanthal APMT™ steel, 2018, Journal of Nuclear Materials, 509, 435-444.
  16. Nene, S.S., Frank, M., Liu, K., Sinha, S., Mishra, R.S., McWilliams, B., Cho, K.C., Reversed strength-ductility relationship in microstructurally flexible high entropy alloy, 2018, Scripta Materialia,154, 163-167.
  17. S Gangireddy, B Gwalani, K Liu, R Banerjee, RS Mishra, Microstructures with extraordinary dynamic work hardening and strain rate sensitivity in Al0.3CoCrFeNi high entropy alloy, 2018, Materials Science and Engineering: A, 734, 42-50.
  18. SS Nene, M Frank, K Liu, RS Mishra, BA McWilliams, KC Cho, Extremely high strength and work hardening ability in a metastable high entropy alloy, Scientific reports 8 (1), 9920.
  19. Argade, G.R., Shukla, S., Liu, K., Mishra, R.S., Friction stir lap welding of stainless steel and plain carbon steel to enhance corrosion properties, 2018, Journal of Materials Processing Technology, 259, 259-269.
  20. Gwalani, B., Gorsse, S., Choudhuri, D., Styles, M., Zheng, Y., Mishra, R.S., Banerjee, R., Modifying transformation pathways in high entropy alloys or complex concentrated alloys via thermo-mechanical processing, 2018, Acta Materialia, 153, 169-185.
  21. Wang, T., Shukla, S., Nene, S.S., Frank, M., Wheeler, R.W., Mishra, R.S., Towards Obtaining Sound Butt Joint Between Metallurgically Immiscible Pure Cu and Stainless Steel Through Friction Stir Welding, 2018, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 49, 2578-2582.
  22. Nene, S.S., Zellner, S., Mondal, B., Komarasamy, M., Mishra, R.S., Brennan, R.E., Cho, K.C., Friction stir processing of newly-designed Mg-5Al-3.5Ca-1Mn (AXM541) alloy: Microstructure evolution and mechanical properties, 2018, Materials Science and Engineering A, 729, 294-299.
  23. Gangireddy, S., Kaimiao, L., Gwalani, B., Mishra, R., Microstructural dependence of strain rate sensitivity in thermomechanically processed Al0.1CoCrFeNi high entropy alloy, 2018, Materials Science and Engineering A, 727, 148-159.
  24. Martinez, N., Kumar, N., Mishra, R.S., Doherty, K.J., Microstructural comparison of friction-stir-welded aluminum alloy 7449 starting from different tempers, 2018, Journal of Materials Science, 53, 9273-9286.
  25. Jiao, Q., Sim, G.-D., Komarasamy, M., Mishra, R.S., Liaw, P.K., El-Awady, J.A., Thermo-mechanical response of single-phase face-centered-cubic AlxCoCrFeNi high-entropy alloy microcrystals, 2018, Materials Research Letters, 6, 300-306.
  26. Wang, T., Sidhar, H., Mishra, R.S., Hovanski, Y., Upadhyay, P., Carlson, B., Friction stir scribe welding technique for dissimilar joining of aluminium and galvanised steel, 2018, Science and Technology of Welding and Joining, 23, 249-255.
  27. Wang, T., Shukla, S., Frank, M., Mishra, R.S., Evolution of bond formation and fracture process of ultrasonic spot welded dissimilar materials, 2018, Science and Technology of Welding and Joining, in press.
  28. S Shukla, M Komarasamy, RS Mishra, Grain size dependence of fatigue properties of friction stir processed ultrafine-grained Al-5024 alloy, 2018, International Journal of Fatigue 109, 1-9.
  29. D Choudhuri, S Shukla, WB Green, B Gwalani, V Ageh, R Banerjee, RS Mishra, Crystallographically degenerate B2 precipitation in a plastically deformed fcc-based complex concentrated alloy, 2018, Materials Research Letters 6 (3), 171-177.
  30. P Nelaturu, S Jana, RS Mishra, G Grant, BE Carlson, Influence of friction stir processing on the room temperature fatigue cracking mechanisms of A356 aluminum alloy, 2018, Materials Science and Engineering: A, 716, 165-178.
  31. M Komarasamy, K Alagarsamy, L Ely, RS Mishra, Characterization of 3ʺ through-thickness friction stir welded 7050-T7451 Al alloy, 2018, Materials Science and Engineering: A, 716, 55-62.
  32. V Tungala, A Arora, B Gwalani, RS Mishra, RE Brennan, KC Cho, Microstructure and mechanical properties of friction stir processed cast Eglin steel (ES-1), 2018, Materials Science and Engineering: A 709, 105-114.
  33. S Palanivel, RS Mishra, RE Brennan, KC Cho, Accelerated age hardening response by in-situ ultrasonic aging of a WE43 alloy, 2018, Materials and Manufacturing Processes 33 (1), 104-108.
  34. I Charit, RS Mishra, Effect of friction stir processed microstructure on tensile properties of an Al-Zn-Mg-Sc alloy upon subsequent aging heat treatment, Journal of Materials Science & Technology, 2018, 34, 214-218.
2017
  1. SS Nene, K Liu, M Frank, RS Mishra, RE Brennan, KC Cho, Z Li, D Raabe, Enhanced strength and ductility in a friction stir processing engineered dual phase high entropy alloy, 2017, Scientific reports, 7 (1), 16167.
  2. N Kumar, M Fusco, M Komarasamy, RS Mishra, M Bourham, KL Murty, Understanding effect of 3.5 wt.% NaCl on the corrosion of Al0.1CoCrFeNi high-entropy alloy, Journal of Nuclear Materials, 2017, 495, 154-163.
  3. H Sidhar, RS Mishra, AP Reynolds, JA Baumann Impact of thermal management on post weld heat treatment efficacy in friction stir welded 2050-T3 alloy, 2017, Journal of Alloys and Compounds 722, 330-338.
  4. N Martinez, N Kumar, RS Mishra, KJ Doherty, Microstructural variation due to heat gradient of a thick friction stir welded aluminum 7449 alloy, Journal of Alloys and Compounds, 2017, 713, 51-63.
  5. M Komarasamy, K Alagarsamy, RS Mishra, Serration behavior and negative strain rate sensitivity of Al0.1CoCrFeNi high entropy alloy, 2017, Intermetallics 84, 20-24.
  6. S Das, NY Martinez, RS Mishra, GJ Grant, S Jana, Control of Reaction Kinetics During Friction Stir Processing, 2017, Metallurgical and Materials Transactions A 48 (5), 2115-2119.
  7. N Martinez, N Kumar, RS Mishra, KJ Doherty, Effect of tool dimensions and parameters on the microstructure of friction stir welded aluminum 7449 alloy of various thicknesses, 2017, Materials Science and Engineering: A 684, 470-479.
  8. S Palanivel, RS Mishra, Building without melting: a short review of friction-based additive manufacturing techniques, International Journal of Additive and Subtractive Materials Manufacturing, 2017, 1, 82-103.
  9. A Sittiho, V Tungala, I Charit, RS Mishra, Understanding Microstructure and Mechanical Properties of Friction Stir Processed Aluminum-Bearing High-Chromium Ferritic Stainless Steel, 2017, Mechanical and Creep Behavior of Advanced Materials, 263-272
  10. Q Yin, Z Wang, R Mishra, Z Xia, Atomic simulations of twist grain boundary structures and deformation behaviors in aluminum, AIP Advances, 2017 7 (1), 015040
  11. MA García-Bernal, RS Mishra, D Hernández-Silva, VM Sauce-Rangel, Microstructural Homogeneity and Hot Deformation of Various Friction-Stir-Processed 5083 Al Alloys, Journal of Materials Engineering and Performance, 2017 26 (1), 460-464
2016
  1. Palanivel, S., Arora, A., Doherty, K.J., Mishra, R.S., A framework for shear driven dissolution of thermally stable particles during friction stir welding and processing, 2016, Materials Science and Engineering A, 678, pp. 308-314.
  2. K Alagarsamy, A Fortier, M Komarasamy, N Kumar, A Mohammad, S. Banerjee, H.-C. Han, R.S. Mishra, Mechanical Properties of High Entropy Alloy Al0.1CoCrFeNi for Peripheral Vascular Stent Application, 2016, Cardiovascular engineering and technology 7 (4), 448-454.
  3. Sidhar, H., Mishra, R.S., Aging kinetics of friction stir welded Al-Cu-Li-Mg-Ag and Al-Cu-Li-Mg alloys, 2016, Materials and Design, 110, pp. 60-71.
  4. Kumar, N., Mishra, R.S., Dahotre, N.B., Brennan, R.E., Doherty, K.J., Cho, K.C., Effect of friction stir processing on microstructure and mechanical properties of laser-processed Mg-4Y-3Nd alloy, 2016, Materials and Design, 110, 663-675.
  5. Dutt, A.K., Pasebani, S., Charit, I., Mishra, R.S., On the creep behavior of dual-scale particle strengthened nickel based alloy, 2016, Materials Science and Engineering A, 676, pp. 406-410.
  6. Sidhar, H., Martinez, N.Y., Mishra, R.S., Silvanus, J., Friction stir welding of Al-Mg-Li 1424 alloy, 2016, Materials and Design, 106, pp. 146-152.
  7. Lipscomb, C.A., Fortier, A., Kong, F., Das, S., Kumar, N., Mishra, R.S., Evaluation of plastic zone development in WE43 magnesium alloy upon friction stir processing using finite element modeling, 2016, Materials Science and Engineering A, 673, pp 178-184.
  8. Darling K.A., Rajagopalan M., Komarasamy M., Bhatia M.A., Hornbuckle B.C., Mishra R.S., Solanki K.N., Extreme creep resistance in a microstructurally stable nanocrystalline alloy, 2016, Nature, 537 (7620) , pp. 378-381.
  9. Garcia-Bernal M.A., Mishra R.S., Verma R., Hernandez-Silva D., Influence of friction stir processing tool design on microstructure and superplastic behavior of Al-Mg alloys, 2016, Materials Science and Engineering A, 670 , pp. 9-16.
  10. Das, S., Martinez, N.Y., Das, S., Mishra, R.S., Grant, G.J., Jana, S., Polikarpov, E., Magnetic Properties of Friction Stir Processed Composite, 2016, JOM, 68, pp 1925-1931.
  11. Tinubu, O.O., Das, S., Dutt, A., Mogonye, J.E., Ageh, V., Xu, R., Forsdike, J., Mishra, R.S., Scharf, T.W., Friction stir processing of A-286 stainless steel: Microstructural evolution during wear, 2016, Wear, Volume 356-357, 15 June 2016, Pages 94-100.
  12. Komarasamy, M., Kumar, N., Mishra, R.S., Liaw, P.K., Anomalies in the deformation mechanism and kinetics of coarse-grained high entropy alloy, 2016, Materials Science and Engineering A, 654, pp. 256-263.
  13. Palanivel, S., Dutta, A.K., Faierson, E.J., Mishra, R.S., Spatially dependent properties in a laser additive manufactured Ti-6Al-4V component, 2016, Materials Science & Engineering A 654,  pp. 39-52.
2015
  1. N. Kumar, Q. Ying, X. Nie, R.S. Mishra, Z. Tang, P.K. Liaw, R.E. Brennan, K.J. Doherty, K.C. Cho, High strain-rate compressive deformation behavior of the Al0.1CrFeCoNi high entropy alloy, 2015, Materials & Design, 86, 598–602.
  2. Komarasamy, M., Mishra, R.S., Mukherjee, S., Young, M.L., Friction Stir-Processed Thermally Stable Immiscible Nanostructured Alloys, 2015, JOM, 67 (12), pp. 2820-282.
  3. Mridha, S., Das, S., Aouadi, S., Mukherjee, S., Mishra, R.S., Nanomechanical Behavior of CoCrFeMnNi High-Entropy Alloy, 2015, JOM, 67 (10), pp. 2296-2302.
  4. S. Pasebani, I. Charit, R.S. Mishra, Effect of tool rotation rate on constituent particles in a friction stir processed 2024Al alloy, 2015, Materials Letters 160, 64-67.
  5. M.A. García-Bernal, R.S. Mishra, R. Verma, D. Hernández-Silva, Inhibition of abnormal grain growth during hot deformation behavior of friction stir processed 5083 Al alloys, 2015, Materials Science and Engineering: A, 636, 326-330.
  6. N. Kumar, D. Choudhuri, R. Banerjee, R.S. Mishra, Strength and ductility optimization of Mg–Y–Nd–Zr alloy by microstructural design, 2015, International Journal of Plasticity 68, 77-97.
  7. R.S. Mishra, N. Kumar, M Komarasamy, Lattice strain framework for plastic deformation in complex concentrated alloys including high entropy alloys, 2015, Materials Science and Technology, 31, 1259-1263.
  8. N. Kumar, M. Komarasamy, P. Nelaturu, Z. Tang, P.K. Liaw, R.S. Mishra, Friction Stir Processing of a High Entropy Alloy Al0. 1CoCrFeNi, 2015, JOM 67 (5), 1007-1013.
  9. S. Pasebani, A.K. Dutt, J. Burns, I. Charit, R.S. Mishra, Oxide dispersion strengthened nickel based alloys via spark plasma sintering, 2015, Materials Science and Engineering: A 630, 155-169.
  10. S Palanivel, H Sidhar, RS Mishra, Friction Stir Additive Manufacturing: Route to High Structural Performance, 2015, JOM 67 (3), 616-621.
  11. S Palanivel, P Nelaturu, B Glass, RS Mishra Friction stir additive manufacturing for high structural performance through microstructural control in an Mg based WE43 alloy, 2015, Materials & Design 65, 934-952.
  12. M Komarasamy, N Kumar, Z Tang, RS Mishra, PK Liaw, Effect of Microstructure on the Deformation Mechanism of Friction Stir-Processed Al0. 1CoCrFeNi High Entropy Alloy, 2015, Materials Research Letters 3 (1), 30-34.
2014
  1. J Wang, J Su, RS Mishra, R Xu, JA Baumann, Tool wear mechanisms in friction stir welding of Ti–6Al–4V alloy, 2014, Wear 321, 25-32.
  2. M Komarasamy, RS Mishra, Serration behavior and shear band characteristics during tensile deformation of an ultrafine-grained 5024 Al alloy, 2014, Materials Science and Engineering: A 616, 189-195.
  3. H Li, Z Hu, K Chandrashekhara, X Du, R Mishra, Reliability-based fatigue life investigation for a medium-scale composite hydrokinetic turbine blade, 2014, Ocean Engineering 89, 230-242.
  4. TG Novak, HD Vora, RS Mishra, ML Young, NB Dahotre, Synthesis of Al0. 5CoCrCuFeNi and Al0. 5CoCrFeMnNi High-Entropy Alloys by Laser Melting, 2014, Metallurgical and Materials Transactions B 45 (5), 1603-1607.
  5. J Wang, W Yuan, RS Mishra, I Charit, An evaluation of creep behaviour in friction stir welded MA754 alloy, 2014, Journal of Materials Engineering and Performance 23 (9), 3159-3164.
  6. S Pasebani, AK Dutt, I Charit, RS Mishra, Nickel-Chromium Alloys: Engineered Microstructure via Spark Plasma Sintering, 2014, Materials Science Forum 783, 1099-1104
  7. N Kumar, M Komarasamy, RS Mishra, Plastic deformation behavior of ultrafine-grained Al–Mg–Sc alloy, 2014, Journal of Materials Science 49 (12), 4202-4214.
  8. JM Davila-Vilchis, RS Mishra, Performance of a hydrokinetic energy system using an axial-flux permanent magnet generator, 2014, Energy 65, 631-638.
  9. N Kumar, N Dendge, R Banerjee, RS Mishra, Effect of microstructure on the uniaxial tensile deformation behavior of Mg–4Y–3RE alloy, 2014, Materials Science and Engineering: A 590, 116-131.
2013
  1. Santhanakrishnan, S., Kumar, N., Dendge, N., Choudhuri, D., Katakam, S., Palanivel, S., Vora, H.D., Banerjee, R., Mishra, R.S., Dahotre, N.B., Macro- and microstructural studies of laser-processed WE43 (Mg-Y-Nd) magnesium alloy, 2013, Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science 44 (5) , pp. 1190-1200.
  2. Wang, J., Yuan, W., Mishra, R.S., Charit, I., Microstructural evolution and mechanical properties of friction stir welded ODS alloy MA754, 2013, Journal of Nuclear Materials 442 (1-3) , pp. 1-6.
  3. Kumar, N., Mishra, R.S., Additivity of strengthening mechanisms in ultrafine grained Al-Mg-Sc alloy, 2013, Materials Science and Engineering A 580 , pp. 175-183.
  4. Yuan, W., Panigrahi, S.K., Mishra, R.S., Achieving high strength and high ductility in friction stir-processed cast magnesium alloy, 2013, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 44 (8) , pp. 3675-3684.
  5. Mohan, A., Panigrahi, S.K., Mishra, R.S., Verma, R., Influence of strain and strain rate on microstructural evolution during superplasticity of Mg-Al-Zn sheet, 2013, Journal of Materials Science 48 (16) , pp. 5633-5644.
  6. Su, J., Wang, J., Mishra, R.S., Xu, R., Baumann, J.A., Microstructure and mechanical properties of a friction stir processed Ti-6Al-4V alloy, 2013, Materials Science and Engineering A 573 , pp. 67-74.
  7. Jain, V., Mishra, R.S., Verma, R., Essadiqi, E., Superplasticity and microstructural stability in a Mg alloy processed by hot rolling and friction stir processing, (2013) Scripta Materialia, 68 (7), pp. 447-450.
  8. Argade, G.R., Kumar, N., Mishra, R.S., Stress corrosion cracking susceptibility of ultrafine grained Al-Mg-Sc alloy, (2013) Materials Science and Engineering A, 565, pp. 80-89.
  9. Mohan, A., Yuan, W., Mishra, R.S., High strain rate superplasticity in friction stir processed ultrafine grained Mg-Al-Zn alloys, (2013) Materials Science and Engineering A, 562, pp. 69-76.
  10. Kapoor, R., Kandasamy, K., Mishra, R.S., Baumann, J.A., Grant, G., Effect of friction stir processing on the tensile and fatigue behavior of a cast A206 alloy, (2013) Materials Science and Engineering A, 561, pp. 159-166.
  11. Kang, J., Wilkinson, D.S., Mishra, R.K., Yuan, W., Mishra, R.S., Effect of inhomogeneous deformation on anisotropy of AZ31 magnesium sheet, 2013, Materials Science and Engineering A, 567, 101-109.
  12. Jain, V., Mishra, R.S., Gupta, A.K., Gouthama, Study of b-precipitates and their effect on the directional yield asymmetry of friction stir processed and aged AZ91C alloy, 2013, Materials Science and Engineering A, 560 , pp. 500-509.
  13. Wang, J., Yuan, W., Mishra, R.S., Charit, I., Microstructure and mechanical properties of friction stir welded oxide dispersion strengthened alloy, 2013, Journal of Nuclear Materials432 (1) , pp. 274-280.
  14. Kumar, N., Mishra, R.S., Ultrafine-Grained Al-Mg-Sc Alloy via Friction-Stir Processing, 2013, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44, pp 934-945.
2012
  1. Yuan, W., Mishra, R.S., Grain size and texture effects on deformation behavior of AZ31 magnesium alloy, 2012, Materials Science and Engineering A, 558 , pp. 716-724.
  2. Kumar, N., Mishra, R.S., Thermal stability of friction stir processed ultrafine grained AlMgSc alloy, 2012, Materials Characterization, 74 , pp. 1-10.
  3. Argade, G.R., Yuan, W., Kandasamy, K., Mishra, R.S., Stress corrosion cracking susceptibility of ultrafine grained AZ31, 2012, Journal of Materials Science 47 (19) , pp. 6812-6822.
  4. Li, H., Chandrashekhara, K., Mishra, R.S., Fatigue life investigation for a medium scale composite hydrokinetic turbine blade, 2012, International SAMPE Technical Conference.
  5. Panigrahi, S.K., Kumar, K., Kumar, N., Yuan, W., Mishra, R.S., DeLorme, R., Davis, B., Howell, R.A., Cho, K., Transition of deformation behavior in an ultrafine grained magnesium alloy, 2012, Materials Science and Engineering A549 , pp. 123-127.
  6. Ghosh, M., Kumar, K., Mishra, R.S., Process optimization for friction-stir-welded martensitic steel, 2012, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science43 (6) , pp. 1966-1975.
  7. Heckman, A., Rovey, J.L., Chandrashekhara, K., Watkins, S.E., Mishra, R., Stutts, D., Ultrasonic underwater transmission of composite turbine blade structural health, 2012, Proceedings of SPIE - The International Society for Optical Engineering8343 , art. no. 83430O.
  8. Argade, G.R., Kandasamy, K., Panigrahi, S.K., Mishra, R.S., Corrosion behavior of a friction stir processed rare-earth added magnesium alloy, 2012, Corrosion Science, 58 , pp. 321-326.
  9. Yuan, W., Mishra, R.S., Carlson, B., Verma, R., Mishra, R.K., Material flow and microstructural evolution during friction stir spot welding of AZ31 magnesium alloy, 2012, Materials Science and Engineering A543 , pp. 200-209.
  10. Argade, G.R., Panigrahi, S.K., Mishra, R.S., Effects of grain size on the corrosion resistance of wrought magnesium alloys containing neodymium, 2012, Corrosion Science, 58 , pp. 145-151.
  11. García-Bernal, M.A., Mishra, R.S., Verma, R., Hernández-Silva, D., Hot deformation behavior of friction-stir processed strip-cast 5083 aluminum alloys with different Mn contents, 2012, Materials Science and Engineering A534 , pp. 186-192.
  12. Jain, V., Yuan, W., Mishra, R.S., Gouthama, Gupta, A.K., Directional anisotropy in the mechanical behavior of friction stir processed and aged AZ91 alloy, 2012, Materials Science Forum702-703 , pp. 64-67.
2011
  1. Yuan, W., Mishra, R.S., Effect of heat index on microstructure and mechanical behavior of friction stir processed AZ31, 2011, Magnesium Technology, pp. 205-209.
  2. Jain, V., Su, J.Q., Mishra, R.S., Verma, R., Javaid, A., Aljarrah, M., Essadiqi, E., Microstructure and mechanical properties of Mg-1.7Y-1.2Zn sheet processed by hot rolling and friction stir processing, 2011, Magnesium Technology, pp. 565-570.
  3. Argade, G.R., Mishra, R.S., Smith, C.B., Mahoney, M.W., Effect of friction stir processing on corrosion behavior of AA5083 aluminum alloy, 2011, TMS Annual Meeting, pp. 307-313.
  4. Yuan, W., Mishra, R.S., Carlson, B., Verma, R., Szymanski, R., Effect of coating on mechanical properties of magnesium alloy friction stir spot welds, 2011, TMS Annual Meeting, pp. 401-407.
  5. Smith, C.B., Mishra, R.S., Argade, G.R., Mahoney, M.W., Mechanical properties of friction stir processed, friction stir welded, and gas metal arc welded AA5083 aluminum plate, 2011, TMS Annual Meeting, pp. 267-280.
  6. Subhra Mukherji, S., Kolekar, N., Banerjee, A., Mishra, R., Numerical investigation and evaluation of optimum hydrodynamic performance of a horizontal axis hydrokinetic turbine, 2011, Journal of Renewable and Sustainable Energy3 (6) , art. no. 063105.
  7. Panigrahi, S.K., Yuan, W., Mishra, R.S., DeLorme, R., Davis, B., Howell, R.A., Cho, K., “A study on the combined effect of forging and aging in Mg-Y-RE alloy,” (2011) Materials Science and Engineering A 530 (1) , pp. 28-35.
  8. Yuan, W., Panigrahi, S.K., Su, J.-Q., Mishra, R.S., “Influence of grain size and texture on Hall-Petch relationship for a magnesium alloy,” (2011) Scripta Materialia 65 (11) , pp. 994-997.
  9. De, P.S., Mishra, R.S., “Grain boundary behavior in an ultrafine-grained aluminum alloy,” (2011) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 42 (12) , pp. 3558-3561.
  10. Ghosh, M., Kumar, K., Mishra, R.S., “Friction stir lap welded advanced high strength steels: Microstructure and mechanical properties,” (2011) Materials Science and Engineering A 528 (28) , pp. 8111-8119.
  11. Kumar, N., Mishra, R.S., Huskamp, C.S., Sankaran, K.K., “The effect of friction stir processing on the microstructure and mechanical properties of equal channel angular pressed 5052Al alloy sheet,” (2011) Journal of Materials Science 46 (16), pp. 5527-5533.
  12. Kumar, N., Mishra, R.S., Huskamp, C.S., Sankaran, K.K., “Microstructure and mechanical behavior of friction stir processed ultrafine grained Al-Mg-Sc alloy,” (2011) Materials Science and Engineering A 528 (18), pp. 5883-5887.
  13. De, P.S., Mishra, R.S., Baumann, J.A., “Characterization of high cycle fatigue behavior of a new generation aluminum lithium alloy,” (2011) Acta Materialia 59, pp. 5946–5960.
  14. Su, J.-Q., Nelson, T.W., McNelley, T.R., Mishra, R.S., “Development of nanocrystalline structure in Cu during friction stir processing (FSP),” (2011) Materials Science and Engineering A 528 (16-17), pp. 5458-5464.
  15. Yuan, W., Mishra, R.S., Webb, S., Chen, Y.L., Carlson, B., Herling, D.R., Grant, G.J., “Effect of tool design and process parameters on properties of Al alloy 6016 friction stir spot welds,” (2011) Journal of Materials Processing Technology 211 (6), pp. 972-977.
  16. Kapoor, R., Rao, V.S.H., Mishra, R.S., Baumann, J.A., Grant, G., “Probabilistic fatigue life prediction model for alloys with defects: Applied to A206,” (2011) Acta Materialia 59 (9), pp. 3447-3462.
  17. De, P.S., Mishra, R.S., “Friction stir welding of precipitation strengthened aluminium alloys: Scope and challenges,” (2011) Science and Technology of Welding and Joining 16 (4), pp. 343-347.
  18. Kumar, N., Mishra, R.S., Huskamp, C.S., Sankaran, K.K., “Critical grain size for change in deformation behavior in ultrafine grained Al-Mg-Sc alloy,” (2011) Scripta Materialia 64 (6), pp. 576-579.
  19. Yuan, W., Mishra, R.S., Carlson, B., Mishra, R.K., Verma, R., Kubic, R., “Effect of texture on the mechanical behavior of ultrafine grained magnesium alloy,” (2011) Scripta Materialia 64 (6), pp. 580-583.
  20. Balasubramanian, N., Mishra, R.S., Krishnamurthy, K., “Process forces during friction stir channeling in an aluminum alloy,” (2011) Journal of Materials Processing Technology 211 (2), pp. 305-311.
  21. De, P.S., Su, J.Q., Mishra, R.S., “A stress-strain model for a two-phase ultrafine-grained aluminum alloy,” (2011) Scripta Materialia 64 (1), pp. 57-60.
2010
  1. Balasubramanian, N., Mishra, R.S., Krishnamurthy, K, “Development of a mechanistic model for friction stir channeling,” (2010) Journal of Manufacturing Science and Engineering, Transactions of the ASME 132 (5), art. no. 054504 0.
  2. Prabhakaran, R., Wang, J., Yuan, W., Chitrada, K., Cole, J., Charit, I., Mishra, R., “Friction stir welding of oxide dispersion strengthened alloys,” (2010) Transactions of the American Nuclear Society 102, pp. 857-858.
  3. Jana, S., Mishra, R.S., Baumann, J.A., Grant, G., “Effect of process parameters on abnormal grain growth during friction stir processing of a cast Al alloy,” (2010) Materials Science and Engineering A 528 (1), pp. 189-199.
  4. De, P.S., Mishra, R.S., “Microstructural evolution during fatigue of ultrafine grained aluminum alloy,” (2010) Materials Science and Engineering A 527 (29-30), pp. 7719-7730.
  5. Jana, S., Mishra, R.S., Baumann, J.A., Grant, G.J., “Effect of Friction Stir Processing on Microstructure and Tensile Properties of an Investment Cast Al-7Si-0.6Mg Alloy,” (2010) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 41, pp 2507- 2521.
  6. Ma, Z.Y., Liu, F.C., Mishra, R.S., “Superplastic deformation mechanism of an ultrafine-grained aluminum alloy produced by friction stir processing,” (2010) Acta Materialia 58 (14), pp. 4693-4704.
  7. Ghosh, M., Kumar, K., Mishra, R.S., “Analysis of microstructural evolution during friction stir welding of ultrahigh-strength steel,” (2010) Scripta Materialia 63 pp. 851-854.
  8. Kapoor, R., Kumar, N., Mishra, R.S., Huskamp, C.S., Sankaran, K.K., “Influence of fraction of high angle boundaries on the mechanical behavior of an ultrafine grained Al-Mg alloy,” (2010) Materials Science and Engineering A 527 (20), pp. 5246-5254.
  9. Deshmukh, S.P., Mishra, R.S., Robertson, I.M., “Investigation of creep threshold stresses using in situ TEM straining experiment in an Al-5Y2O3-10SiC composite,” (2010) Materials Science and Engineering A 527 (9), pp. 2390-2397.
  10. Kapoor, R., De, P.S., Mishra, R.S., “An analysis of strength and ductility of ultrafine grained Al alloys,” (2010) Materials Science Forum 633-634, pp. 165-177.
  11. Jana, S., Mishra, R.S., Baumann, J.B., Grant, G., “Effect of friction stir processing on fatigue behavior of an investment cast Al-7Si-0.6 Mg alloy,” (2010) Acta Materialia 58 (3), pp. 989-1003.
  12. Yadava, M.K., Mishra, R.S., Chen, Y.L., Carlson, B., Grant, G.J., “Study of friction stir joining of thin aluminium sheets in lap joint configuration,” (2010) Science and Technology of Welding and Joining 15 (1), pp. 70-75.
  13. Bhargava, G., Yuan, W., Webb, S.S., Mishra, R.S., “Influence of texture on mechanical behavior of friction-stir-processed magnesium alloy,” (2010) Metallurgical and Materials Transactions A 41 (1), pp. 13-17.
  14. Freeney, T.A., Mishra, R.S., “Effect of Friction Stir Processing on Microstructure and Mechanical Properties of a Cast-Magnesium-Rare Earth Alloy,” (2010) Metallurgical and Materials Transactions A 41 (1) pp. 73-84.
2009
  1. Jana, S., Mishra, R.S., Baumann, J.B., Grant, G., “Effect of stress ratio on the fatigue behavior of a friction stir processed cast Al-Si-Mg alloy,” (2009) Scripta Materialia 61 (10), pp. 992-995.
  2. Rodelas, J., Hilmas, G., Mishra, R.S., “Sinterbonding cobalt-cemented tungsten carbide to tungsten heavy alloys,” (2009) International Journal of Refractory Metals and Hard Materials 27 (5), pp. 835-841.
  3. Hatamleh, O., Mishra, R.S., Oliveras, O., “Peening effects on mechanical properties in friction stir welded AA 2195 at elevated and cryogenic temperatures,” (2009) Materials and Design 30 (8), pp. 3165-3173. 
  4. Dutta, A., De, P.S., Mishra, R.S., Watson, T.J., “Deformation behavior of an ultrafine-grained Al-Ni-Y-Co-Sc alloy,” (2009) Materials Science and Engineering A 513-514 (C), pp. 239-246.
  5. Mishra, R.S., “Dislocation-particle interaction at elevated temperatures,” (2009) JOM 61 (2), pp. 52-55.
  6. Dixit, V., Mishra, R.S., Lederich, R.J., Talwar, R., “Influence of process parameters on microstructural evolution and mechanical properties in friction stirred Al-2024 (T3) alloy,” (2009) Science and Technology of Welding and Joining 14 (4), pp. 346-355.
  7. García-Bernal, M.A., Mishra, R.S., Verma, R., Hernández-Silva, D., “High strain rate superplasticity in continuous cast Al-Mg alloys prepared via friction stir processing,” (2009) Scripta Materialia 60 (10), pp. 850-853.
  8. Balasubramanian, N., Mishra, R.S., Krishnamurthy, K., “Friction stir channeling: Characterization of the channels,” (2009) Journal of Materials Processing Technology 209 (8), pp. 3696-3704.
  9. Ma, Z.Y., Mishra, R.S., Liu, F.C., “Superplastic behavior of micro-regions in two-pass friction stir processed 7075Al alloy,” (2009) Materials Science and Engineering A. 505 (1-2), pp. 70-78.
  10. De, P.S., Mishra, R.S., Smith, C.B., “Effect of microstructure on fatigue life and fracture morphology in an aluminum alloy,” (2009) Scripta Materialia, 60 (7), pp. 500-503.
  11. Balasubramanian, N., Gattu, B., Mishra, R.S., “Process forces during friction stir welding of aluminium alloys,” (2009) Science and Technology of Welding and Joining 14 (2), pp. 141-145.
  12. Ross, N.C., Mishra, R.S., Senkov, O.N., Miracle, D.B., “Observation of Shear Thickening during Compressive Flow of Mg54Y11Ag7Cu28 in the Supercooled Liquid Region,” (2009) Metallurgical and Materials Transactions A, 40, pp. 1-3. 
2008
  1. Wang, Y., Mishra, R.S., Watson, T.J., “Mechanical behavior of devitrified ultrafine-grained Al-4.0Y-4.0Ni-0.9Co matrix composites,” (2008) Scripta Materialia, 59 (10), pp. 1079-1082. 
  2. Shi, X.L., Mishra, R.S., Watson, T.J., “Effect of temperature and strain rate on tensile behavior of ultrafine-grained aluminum alloys”, (2008) Materials Science and Engineering A, 494 (1-2), pp. 247-252. 
  3. De, P.S., Obermark, C.M., Mishra, R.S., “Development of a reversible bending fatigue test bed to evaluate bulk properties using sub-size specimens,” (2008) Journal of Testing and Evaluation, 36 (4), pp. 402-405. 
  4. Mishra, R.S. Preface to the Viewpoint Set on friction stir processing (2008) Scripta Materialia, 58 (5), pp. 325-326.
  5. Colligan, K.J., Mishra, R.S. A conceptual model for the process variables related to heat generation in friction stir welding of aluminum (2008) Scripta Materialia, 58 (5), pp. 327-331.
  6. Charit, I., Mishra, R.S. Abnormal grain growth in friction stir processed alloys (2008) Scripta Materialia, 58 (5), pp. 367-371.
  7. Sharma, S.R., Mishra, R.S. Fatigue crack growth behavior of friction stir processed aluminum alloy (2008) Scripta Materialia, 59 (2008) 395–398.
  8. Dixit, M., Mishra, R.S., Sankaran, K.K. Structure-property correlations in Al 7050 and Al 7055 high-strength aluminum alloys (2008) Materials Science and Engineering A, 478 (1-2), pp. 163-172.
2007
  1. V. Dixit, R. S. Mishra, R. J. Lederich and R. Talwar, “Effect of initial temper on mechanical properties of friction stir welded Al-2024 alloy,” Science and Technology of Welding and Joining, 12 (2007) 334-40.
  2. L.B. Johannes, I. Charit, R.S. Mishra and R. Verma, “Enhanced superplasticity through friction stir processing in continuous cast AA5083 aluminum,” Materials Science and Engineering A 464 (2007) 351–357.
  3. L.B. Johannes and R.S. Mishra, “Multiple passes of friction stir processing for the creation of superplastic 7075 aluminum,” Materials Science and Engineering A, 464 (2007) 255–260.
  4. Y. Wang and R.S. Mishra, “Finite element simulation of selective superplastic forming of friction stir processed 7075 Al alloy,” Materials Science and Engineering A, 463 (2007) 245–248.
  5. Y. Wang, X.L. Shi, R.S. Mishra and T.J. Watson, “Friction stir welding of devitrified Al–4.0Y–4.0Ni–0.9Co alloy produced by amorphous powders,” Scripta Materialia, 56 (2007) 971-974.
  6. Y. Wang, X.L. Shi, R.S. Mishra and T.J. Watson, “Ductility improvement in devitrified ultrafine-grained Al–4.0Y–4.0Ni–0.9Co alloy via hot rolling,” Scripta Materialia, 56 (2007) 923-925.
  7. M. Dixit, J. W. Newkirk and R. S. Mishra, “Properties of friction stir-processed Al 1100-NiTi composite,” Scripta Materialia, 56 (2007) 541-4.
2006
  1. Z. Y. Ma, S. R. Sharma and R. S. Mishra, “Microstructural Modification of As-Cast Al-Si-Mg Alloy by Friction Stir Processing,” Metallurgical and Materials Transactions A. 37A (2006) 3323-3336.
  2. Z. Y. Ma, S. R. Sharma and R. S. Mishra, “Effect of friction stir processing on the microstructure of cast A356 aluminum,” Materials Science and Engineering A, 433 (2006) 269-278. 
  3. J. E. Spowart, A. Tewari, A. M. Gokhale, R. S. Mishra and D. B. Miracle, “Characterization of the effects of friction stir processing on microstructural changes in DRA composites,” Materials Science & Engineering A, vol.428, no.1-2, 25 July 2006, pp. 80-90.
  4. L. B Johannes, L. L. Yowell, E. Sosa, S. Arepalli and R. S Mishra, “Survivability of single-walled carbon nanotubes during friction stir processing,” Nanotechnology, 17 (2006) 3081-3084.
  5. Z. Y. Ma, S. R. Sharma and R. S. Mishra, “Effect of multiple-pass friction stir processing on microstructure and tensile properties of a cast aluminum-silicon alloy,” Scripta Materialia, 54 (2006) 1623-1626.
  6. S. Tandon, S. R. Deshmukh, R. S. Mishra, K. Krishnamurthy, R. Tayloe, Fracture criteria prediction in wiredrawing using finite element modeling. Wire Journal International, vol.39, no.1, Jan. 2006, pp. 58-62.
2005
  1. S. P. Deshmukh, R. S. Mishra and K. L. Kendig, „Creep behavior of extruded Al-6Mg-1Sc-1Zr-10 vol.% SiCp composite,” Materials Science & Engineering A, 410 (2005) 53-57.
  2. R. S. Mishra and Z. Y. Ma, “Friction Stir Welding and Processing,” Materials Science and Engineering R, 50 (2005) 1-78.
  3. I. Charit and R. S. Mishra, “Low temperature superplasticity in a friction-stir-processed ultrafine grained Al-Zn-Mg-Sc alloy,” Acta Materialia, 53 (2005) 4211-4223.
  4. R B. Grishaber, A. V. Sergueeva, R. S. Mishra and A. K. Mukherjee, “Laminated metal composites - High temperature deformation behavior”, Materials Science & Engineering A, 403 (2005) 17-24.
  5. Z. Y. Ma and R. S. Mishra, “Development of ultrafine-grained microstructure and low temperature (0.48 Tm) superplasticity in friction stir processed Al-Mg-Zr,” Scripta Materialia, 53 (2005) 75-80.
  6. S. Mohan and R. S. Mishra, “Friction stir microforming of superplastic alloys,” Microsystem Technologies, 11 (2005) 226-229.
  7. Z. Y. Ma, R. S. Mishra, M. W. Mahoney and R. Grimes, “Effect of Friction Stir Processing on the Kinetics of Superplastic Deformation in an Al-Mg-Zr Alloy,” Metallurgical and Materials Transactions A., 36A (2005) 1447-1458.
  8. X. L. Shi, R. S. Mishra and T. J. Watson, “Elevated temperature deformation behavior of nanostructured Al-Ni-Gd-Fe alloys,” Scripta Materialia, 52 (2005) 887-891.
  9. A. Dutta, I. Charit, L. B. Johannes and R S. Mishra, “Deep cup forming by superplastic punch stretching of friction stir processed 7075 Al alloy”, Materials Science & Engineering A, 395 (2005) 173-179.
2004
  1. R. W. Hayes, P. B. Berbon and R. S. Mishra, “Microstructure characterization and creep deformation of an Al-10 Wt Pct Ti-2 Wt Pct Cu Nanocomposite,” Metallurgical and Materials Transactions A., 35A (2004) 3855-3861.
  2. I. Charit and R. S. Mishra, “Evaluation of microstructure and superplasticity in friction stir processed 5083 Al alloy,” Journal of Materials Research, 19, (2004) 3329-3342.
  3. A. J. Kulkarni, K. Krishnamurthy, S. P. Deshmukh and R. S. Mishra, “Effect of particle size distribution on strength of precipitation-hardened alloys,” Journal of Materials Research, 19 (2004) 2765.
  4. S. P. Deshmukh, R. S. Mishra and K. L. Kendig, “Creep behavior and threshold stress of an extruded Al-6Mg-2Sc-lZr alloy,” Materials Science and Engineering A, 381 (2004) 381-385.
  5. S. R. Sharma, Z. Y. Ma and R. S. Mishra, “Effect of friction stir processing on fatigue behavior of A356 alloy,” Scripta Materialia, 51 (2004) 237.
  6. A. Kulkarni, K. Krishnamurthy; S. P. Deshmukh and R. S. Mishra, “Microstructural optimization of alloys using a genetic algorithm,” Materials Science and Engineering A., 372 (2004) 213.
  7. Z. Y. Ma, R. S. Mishra and M. W. Mahoney, “Superplasticity in cast A356 induced via friction stir processing,” Scripta Materialia, 50 (2004) 931.
2003
  1. Z. Y. Ma and R. S. Mishra, Cavitation in superplastic 7075Al alloys prepared via friction stir processing,” Acta Materialia, 51 (2003) 3551.
  2. I. Charit and R. S. Mishra, “High strain rate superplasticity in a commercial 2024 Al alloy via friction stir processing,” Materials Science and Engineering A, A359 (2003) 290.
  3. J.-Q. Su, T.W. Nelson, R. Mishra, M.  Mahoney, “Microstructural investigation of friction stir welded 7050-T651 aluminium” Acta Materialia, 51 (2003) 713-729.  
  4. Z. Y. Ma, R. S. Mishra, M. W. Mahoney, and R. Grimes, “High strain rate superplasticity in friction stir processed Al-Mg-Zr alloy,” Materials Science and Engineering A, A351 (2003) 148.
  5. R. S. Mishra, Z. Y. Ma and I. Charit, “Friction stir processing: A novel technique for fabrication of surface composite,” Materials Science and Engineering A, A341 (2003) 307.
2002
  1. Z. Y. Ma, R. S. Mishra and M. W. Mahoney, “Superplastic deformation behavior of friction stir processed 7075Al alloy,” Acta Materialia, 50 (2002) 4419.
  2. Z. Y. Ma, R. S. Mishra and S. C. Tjong,” High-temperature creep behaviour of TiC particulate reinforced Ti-6Al-4V alloy composite,” Acta Materialia, 50 (2002) 4293.
  3. I. Charit, R. S. Mishra and M. W. Mahoney, “Multi-sheet structures in 7475 aluminum by friction stir welding in concert with post-weld superplastic forming,” Scripta Materialia, 47 (2002) 631.
2001
  1. R. S. Mishra, R. Z. Valiev, S. X. McFadden, R. K. Islamgaliev and A. K. Mukherjee, “High strain rate superplasticity from nanocrystalline Al alloy 1420 at low temperatures,” Philosophical Magazine A, 81 (2001) 37.
  2. R.S. Mishra and A.K. Mukherjee, “Processing of high hardness-high toughness alumina matrix nanocomposites,” Materials Science and Engineering, A301 (2001) 97.
  3. R. K. Islamgaliev, R. Z. Valiev, R. S. Mishra and A. K. Mukherjee, “Enhanced superplastic properties in bulk metastable nanostructured alloys,” Materials Science and Engineering A, A304-A306 (2001) 206.
  4. R. S. Mishra, “Processing commercial aluminum alloys for high strain rate superplasticity,” Journal of Materials, 53(3) (2001) 23.
  5. P. B. Berbon, W. H. Bingel, R. S. Mishra, C. C. Bampton and M. W. Mahoney, “Friction stir processing: a tool to homogenize nanocomposite aluminum alloys,” Scripta Materialia, 44 (2001) 61.
  6. R. Z. Valiev, C. Song, S. X. McFadden, A. K. Mukherjee and R. S. Mishra, “TEM/HREM observations of nanostructured superplastic Ni3Al,” Philosophical Magazine, 81A (2001) 25.
  7. R. S. Mishra, V. V Stolyarov, C. Echer, R. Z. Valiev, A. K. Mukherjee, “Mechanical behavior and superplasticity of a severe plastic deformation processed nanocrystalline Ti-6Al-4V alloy,” Materials Science and Engineering, A298 (2001) 44.
2000
  1. S.X. McFadden, A.P. Zhilyaev, R. S. Mishra and A.K. Mukherjee, “Observations of low-temperature superplasticity in electrodepositedultrafine grained nickel,” Materials Letters, 45 (2000) 345.
  2. R. S. Mishra and A. K. Mukherjee, “An analysis of the role of grain size on superplasticity of g titanium aluminides,” Journal of Materials Science, 35 (2000) 147.
  3. Y. H. Han, R. S. Mishra, M. J. Gasch, H. B. Lee and A. K. Mukherjee, “Processing of Si3N4/SiC and boron-modified nanocomposites via ceramic precursor route,” Korean Journal of Ceramics, 6 (2000), 245.
  4. S. X. McFadden, A. V. Sergueeva, R. S. Mishra and A. K. Mukherjee, “High strain rate superplasticity in microcrystalline and nanocrystalline materials,” Materials Science & Technology, 16 (2000) 1340.
  5. R. S. Mishra and A. K. Mukherjee, “Electric pulse assisted rapid consolidation of ultrafine grained alumina matrix composites,” Materials Science & Engineering, A287 (2000) 178.
  6. R. S. Mishra, M. W. Mahoney, S. X. McFadden, N. A. Mara, and A. K. Mukherjee, “High strain rate superplasticity in a friction stir processed 7075 al alloy,” Scripta Materialia, 42 (2000) 163.
1999
  1. R. S. Mishra, “Designing DRA Composites for High Creep Strength,” Journal Of Metals, 51(11) (1999) 65.
  2. R. S. Mishra, R. Z. Valiev, S. X. McFadden, R. K. Islamgaliev and A. K. Mukherjee, “Severe plastic deformation processing and High Strain Rate Superplasticity in an Aluminum Matrix Composite,” Scripta Materialia, 40 (1999) 1151.
  3. S. X. McFadden, R. S. Mishra, R. Z. Valiev, A. P. Zhilyaev and A. K. Mukherjee, “Low temperature superplasticity in nanocrystalline nickel and metal alloys,” Nature, 398 (1999) 684.
  4. R. S. Mishra, V. Jayaram, B. Majumdar, C. E. Lesher and A. K. Mukherjee, “ZrO2-Al2O3 nanocomposite by high pressure sintering of spray pyrolysed powders,” Journal of Materials Research, 14 (1999) 834.
  5. R. S. Mishra, S. X. McFadden, R. Z. Valiev and A. K. Mukherjee, “Deformation mechanisms and tensile superplasticity in nanocrystalline materials,” Journal of Metals, 51(1) (1999) 37.
1998
  1. R. S. Mishra, R. Z. Valiev, S. X. McFadden and A. K. Mukherjee, “Tensile Superplasticity in Nanocrystalline Nickel Aluminide” Materials Science and Engineering A, A252 (1998) 174.
  2. R. S. Mishra, R. H. Lu, R. B. Grishaber and A. K. Mukherjee, “Effect of Stressed Pre-exposure on the Creep Strengthening of a 2009Al-SiCw Composite” Scripta Materialia, 38 (1998) 1819.
  3. R. S. Mishra, S. H. Risbud and A. K. Mukherjee, “Effect of electric pulsing on densification of a and g alumina,” Journal of Materials Research, 13 (1998) 86.
1997
  1. R. S. Mishra, T. R. Bieler and A. K. Mukherjee, “Mechanism of high strain rate superplasticity in aluminum alloy composites,” Acta Metallurgica et Materialia., 45 (1997) 561.
  2. A. B. Pandey, R. S. Mishra, A. G. Paradkar and Y. R. Mahajan, “Steady state creep behaviour of an Al-Al2O3 alloy,” Acta Metallurgica et Materialia, 45 (1997) 1297.
  3. R. Z. Valiev, G. F. Korznikova, K. Y. Mulyukov, R. S. Mishra and A. K. Mukherjee, “Saturation magnetization and curie temperature of nanocrystalline nickel,” Philosophical Magazine B, 75 (1997) 803.
1996
  1. T. R. Bieler, R. S. Mishra and A. K. Mukherjee, “High strain rate superplasticity in aluminum matrix composites,” JOM, 48 (2) (1996) 52. 
  2. A. B. Pandey, R. S. Mishra and Y. R. Mahajan, "Effect of a solid solution on the steady state creep behavior of an aluminum-matrix composite," Metall. Trans. A, 27A (1996) 305.
  3. S. Ranganath and R. S. Mishra, "Steady state creep behavior of particulate reinforced titanium matrix composites," Acta Metallurgica et Materialia, 44 (1996) 927.
  4. R. Z. Valiev, R. S. Mishra, J. Groza and A. K. Mukherjee, “Processing of nanostructured nickel by severe plastic deformation consolidation of ball milled powder,” Scripta Metall. Mater., 34 (1996) 1443.
  5. R. S. Mishra, A. K. Mukherjee, D. K. Mukhopadhyay, C. Suryanarayana and F. H. Froes, “High temperature deformation behavior of a nanocrystalline titanium aluminide,” Scripta Metall. Mater., 34 (1996) 1765.
  6. A. B. Pandey, R. S. Mishra and Y. R. Mahajan, “Effect of isothermal heat treatment on the creep behaviour of an Al-TiCp composite,” Materials Science and Engineering A, A206 (1996) 270.
  7. S. Ranganath, T. Roy and R. S. Mishra, “Microstructure and deformation of TiB+Ti2C reinforced titanium matrix composites,” Materials Science and Technology, 12 (1996) 219.
  8. T. R. Bieler, R. S. Mishra and A. K. Mukherjee, “Superplasticity in hard-to-machine materials,” Annual Review of Materials Science, 26 (1996) 75.
  9. R. S. Mishra, C. Echer, C. C. Bampton, T. R. Bieler and A. K. Mukherjee, “Influence of temperature on segregation in 2009 Al-SiCw composite and its implication on high strain rate superplasticity,” Scripta Metall. Mater., 35 (1996) 247. 
  10. R. S. Mishra, A. K. Mukherjee, K. Yamazaki and K. Shoda, “Effect of TiO2 doping on rapid densification of alumina by plasma activated sintering,” J. Mater. Res., 11 (1996) 1144.
  11. R. B. Grishaber, R. S. Mishra and A. K. Mukherjee, “Effect of testing environment on intergranular microsuperplasticity in aluminum MMC,” Mater. Sci. Eng., A220 (1996) 78.
  12. R. S. Mishra, C. E. Lesher and A. K. Mukherjee, “High pressure sintering of nanocrystalline g-Al2O3,” J. American Ceramic Society, 79 (1996) 2989.
  13. R. Z. Valiev, R. S. Mishra and A. K. Mukherjee, “Ultra-fine grained nickel produced by severe plastic deformation,” Annales de Chimie-Science des Materiaux, 21 (1996) 399.
1995
  1. R. S. Mishra, T. R. Bieler and A. K. Mukherjee, "Superplasticity in powder metallurgy aluminium alloys and composites," Acta Metallurgica et Materialia, 43 (1995) 877.
  2. T. K. Nandy, R. S. Mishra, A. K. Gogia and D. Banerjee, "The effect of aluminium on the creep behaviour of titanium aluminide alloys," Scripta Metallurgica et Materialia, 32 (1995) 851.
  3. V. K. Varma, R. S. Mishra, V. A. Joshi, B. V. Rao, K. K. Sharma and D. Banerjee, “Effect of heat treatment on microstructure and mechanical properties of CM247LC cast superalloy rotor,” Trans. Indian Institute of Metals, 48 (1995) 69.
  4. D. M. Farkas, R. S. Mishra and A. K. Mukherjee, "Instantaneous strain measurements during high temperature stress cycling of a dispersion-strengthened niobium alloy," Scripta Metallurgica et Materialia, 32 (1995) 1725.
  5. R. S. Mishra, S. P. Singh, A. M. Srirammurthy and M. C. Pandey, Effect of grain boundary orientation on creep behaviour of a directionally solidified CM 247 LC Alloy," Materials Science and Technology, 11 (1995) 341.
  6. R. S. Mishra, J. Schneider, J. F. Shackelford and A. K. Mukherjee, "Plasma activated sintering of nanocrystalline g-Al2O3," NanoStructured Materials, 5 (1995) 525.
  7. R. S. Mishra, A. B. Pandey, K. S. Prasad and A. K. Mukherjee, "Microstructure of a creep tested Al-20 vol.% SiC composite," Scripta Metallurgica et Materialia, 33 (1995) 479.
  8. R. S. Mishra, A. B. Pandey and A. K. Mukherjee, "An evaluation of steady state creep mechanism in an Al-Mg/26 Al2O3f composite, Materials Science and Engineering A, 201 (1995) 205.
1994
  1. R. S. Mishra, T. K. Nandy and G. W. Greenwood, "The threshold stress for dislocation-particle interaction controlled creep," Philosophical Magazine A, 69 (1994) 1097.
  2. R. S. Mishra and D. Banerjee, "Transient mechanisms in diffusional creep in a titanium aluminide," Scripta Metallurgica et Materialia, 31 (1994) 1555.
  3. A. B. Pandey, R. S. Mishra and Y. R. Mahajan, "High temperature creep of Al-TiB2 particulate composites," Materials Science and Engineering A, A189 (1994) 95.
1993
  1. T. K. Nandy, R. S. Mishra and D. Banerjee, "Creep behaviour of an orthorhombic phase in a Ti-Al-Nb alloy," Scripta Metallurgica et Materialia, 27 (1993) 569.
  2. A. B. Pandey, R. S. Mishra and Y. R. Mahajan, "Creep fracture in Al-SiC composites," Journal of Materials Science, 28 (1993) 2943.
  3. R. S. Mishra, A. G. Paradkar and K. N. Rao, "Steady state creep behaviour of a rapidly solidified and further processed Al-5 wt% Ti alloy," Acta Metallurgica et Materialia, 41 (1993) 2243.
  4. R. S. Mishra, A. K. Singh and T. Roy, "Creep of an AlCoCu Quasicrystal," Philosophical Magazine Letters, 68 (1993) 225.
  5. A. B. Pandey, R. S. Mishra and Y. R. Mahajan, "On the anomalous creep behaviour of a XD Al-TiB2 composite," Scripta Metallurgica et Materialia, 29 (1993) 1199.
1992
  1. R. S. Mishra, "Dislocation creep mechanism map for dispersion strengthened materials," Scripta Metallurgica et Materialia, 26 (1992) 309.
  2. D. K. Das, A. G. Paradkar and R. S. Mishra, "Microstructure and creep behaviour of laser surface alloyed Al-Ni alloy," Scripta Metallurgica et Materialia, 26 (1992), 1211.
  3. R. S. Mishra, T. R. Bieler and A. K. Mukherjee, "On the superplasticity of mechanically alloyed aluminium alloys," Scripta Metallurgica et Materialia, 26 (1992), 1605.
  4. A. B. Pandey, R. S. Mishra and Y. R. Mahajan, "Steady state creep behaviour of silicon carbide particulate reinforced aluminium alloys," Acta Metallurgica et Materialia, 40 (1992), 2045.
  5. A. G. Paradkar, K. N. Rao, P. V. Rao and R. S. Mishra, "Microstructural characterization of rapidly solidified Al-Fe-MM alloy with Mg addition," International Journal of Rapid Solidification, 7 (1992), 167.
1991
  1. R. S. Mishra and A. K. Mukherjee, "On the superplasticity in silicon carbide reinforced aluminium composites," Scripta Metallurgica, 25 (1991) 271.
1990
  1. R. S. Mishra, H. Jones and G. W. Greenwood, "Creep of a low carbon steel at low stresses and intermediate temperatures," Acta Metallurgica, 38 (1990) 461.
  2. R. S. Mishra, H. Jones and G. W. Greenwood, "Creep of a rapidly solidified and further processed Al-Cr-Zr alloy," Int. J. Rapid Solidification, 5 (1990) 149.
  3. R. S. Mishra, H. Jones and G. W. Greenwood, "Creep of Pb-2.5Sb-0.2Sn alloy at low stresses," Materials Science and Technology, 6 (1990) 504.
  4. R. K. Singh and R. S. Mishra, "Influence of minor additions of Zr on the mechanical behaviour of a Mg-Li-Al alloy," Scripta Metallurgica, 24 (1990) 451.
  5. R. S. Mishra and A. B. Pandey, "Some observations on the high-temperature creep behaviour of 6061 Al-SiC composites," Metallurgical Transactions A, 21A (1990) 2089.
  6. R. S. Mishra and D. Banerjee, "On the influence of cooling rate in solution treatment for a Ti-25Al-llNb alloy," Scripta Metallurgica, 24 (1990) 1477.
  7. A. B. Pandey, R. S. Mishra and Y. R. Mahajan, "Creep behaviour of an aluminium-silicon carbide particulate composite," Scripta Metallurgica, 24 (1990) 1565.
  8. R. S. Mishra and D. Banerjee, "Microstructure and steady state creep in Ti-24Al-llNb," Materials Science and Engineering, A130 (1990) 151.
1989
  1. R. S. Mishra, H. Jones and G. W. Greenwood, "Some correlations between parameters relating to grain boundary self diffusion in silver," Materials Science and Engineering A, 117 (1989) L21.
  2. R. S. Mishra, H. Jones and G. W. Greenwood, "An analysis of low stress creep data for coarse-grained pure lead," Materials Letters, 8 (1989) 187.
  3. R. S. Mishra, H. Jones and G. W. Greenwood, "On the threshold stress for diffusional creep in pure metals," Philosophical Magazine A, 60 (1989) 581.
1988
  1. R. S. Mishra and G. S. Murty, "The Stress-strain rate behaviour of superplastic Zn-Al eutectoid alloy," J. Materials Science, 23 (1988) 593.
  2. R. S. Mishra and G. S. Murty, "Effect of concurrent grain growth on the stress-strain rate curve of superplastic materials," J. Materials Science Letters, 7 (1988) 185.
  3. R. S. Mishra, H. Jones and G. W. Greenwood, "Enhanced diffusional creep: The effect of grain growth," Scripta Metallurgica, 22 (1988) 323.
  4. R. S. Mishra, H. Jones and G. W. Greenwood, "An empirical correlation for the grain boundary diffusion of impurities in copper," J. Materials Science Letters, 7 (1988) 728.
1987
  1. A. O. Sepulveda and R. S. Mishra, "An analysis of grain-growth data in duplex materials on static annealing and during superplastic deformation," J. Materials Science, 22 (1987) 2153.