Journal Publications | Selected Conferences

Book Chapter

  1. B. Kovacevich, D. Crawford, M. Carl*, M. Burgess*, and M.L. Young: “Mesoamerican Jades and Greenstones from the Dallas Museum of Art Collection” in The Catalogue: Art of the Americas at the Dallas Museum of Art, in M. Rich: The Catalogue: Art of the Americas at the Dallas Museum of Art, February (2023) 

Journal Publications

  1. S.R. Cooper*, A. Ghoshal, M. Murugan, V.L. Blair, S.M. Aouadi, A.A. Voevodin, and M.L. Young: “Combinatorial Processing and Evaluation of the Phase Evolution and Oxidation Behavior of Hf-Al-Si Refractory Complex Concentrated Alloys”, Acta Materialia, May (2024)
  2. F. Gantz*, S.R. Cooper*, J. Smith*, and M.L. Young: “Compositional Changes of H-phase Precipitates in NiTiHf Shape Memory Alloys using Atom Probe Tomography”, Scripta Materialia, May (2024)
  3. M.T. Wall*, Y. Wang*, J.E. McCool*, C.G. White*, and M.L. Young: “Non-destructive Compositional and Structural Analysis of Early Chinese Currencies”, Metallurgical and Materials Transactions A, March (2024) https://doi.org/10.1007/s11661-024-07354-3
  4. W. Knight*, F. Gantz*, M. Carl*, M.L. Young, B. Kovacevich, D. Crawford, E. Torok, and F. Baas: “Complementary Scientific Techniques for the Study of Mesoamerican Greenstone Objects”, Heritage Science, 12 (42), December (2023) https://doi.org/10.1186/s40494-023-01128-7 
  5. A. Kolek*, S.R. Cooper*, K.D. Behler, A. Ghoshal, T.W. Moore, A.J. Wright, V.L. Blair, R.F. Reidy, M.L. Young, A.A. Voevodin, and S.M. Aouadi: "High temperature ablation of hot pressed HfC-SiC ceramics", International Journal of Applied Ceramic Technology, September (2023) https://doi.org/10.1111/ijac.14543
  6. N. John*, B. Ashmore*, M.T. Wall*, R.W. Wheeler, M.L. Young, and A. Giri: “Comparative Analysis of Processing-Induced Strain Glass States in Austenitic and Martensitic NiTi Shape Memory Alloy Plates”, Frontiers in Metals and Alloys, September (2023) https://doi.org/10.3389/ftmal.2023.1238835
  7. P.H. Kuo*, N.A. Ley*, M.L. Young, and J. Du: “Phase Evolution and Crystallization Mechanism of Glass-ceramics Solid State Electrolyte from in-situ Synchrotron X-ray Diffraction”, Journal of Physical Chemistry Part C, August (2023) https://doi.org/10.1021/acs.jpcc.3c02340
  8. T. Yamazaki*, A. Montagnoli*, M.L. Young, and I. Takeuchi: “Tuning the Temperature Range of Superelastic Ni-Ti Alloys for Elastocaloric Cooling via Thermal Processing”, Journal of Physics: Energy, 5(2) 024020, April (2023) https://doi.org/10.1088/2515-7655/accd21
  9. J. Smith* and M.L. Young: “APAV: An Open-Source Python Package for Mass Spectrum Analysis in Atom Probe Tomography”, Journal of Open Source Software, 8(83), 4862, March (2023) https://doi.org/10.21105/joss.04862
  10. B. Ashmore*, M.L. Young, and A. Giri: “Synchrotron Radiation X-ray Diffraction Measurements of the Thermomechanical Response of a Processing-induced NiTi Strain Glass Alloy” – accepted to Shape Memory and Superelasticity, 9, 87-96, March (2023) https://doi.org/10.1007/s40830-023-00424-2
  11. G. Gamboa*, D. Berman, S. Aouadi, M.L. Young, N. Ku, and R.E. Brennan: “Experimental Investigation and Simulation of Al/B4C Metal Matrix Composites Produced using Magnetic Field-Assisted Freeze Casting of Porous Ceramic Structures”, MRS Advances, 8, 59-65, February (2023) https://doi.org/10.1557/s43580-023-00502-8
  12. F. Gantz*, M. Wall*, M.L. Young, and D. Forbes: “Extending Fatigue Life of NiTiHf Shape Memory Alloy Wires through Rapid Thermal Annealing”, Shape Memory and Superelasticity, 8 439-451 December (2022) https://doi.org/10.1007/s40830-022-00404-y
  13. M.T. Wall*, Y. Ren, T. Hesterberg, T. Ellis, and M.L. Young: “Effects of Micro-alloying with Lead for Battery Grid Material”, Journal of Energy Storage, 55 105569, Part B, November (2022) https://doi.org/10.1016/j.est.2022.105569
  14. F. Gantz*, H. Stroud, J.C. Fuller, K. Adams, P.E. Caltagirone, H. Ozcan, I. Karaman, D.J. Hartl, A.P. Stebner, W. Trehern, T. Turner, R.W. Wheeler, M.L. Young, and O. Benafan: “Aerospace, Energy Recovery, and Medical Applications: Shape Memory Alloy Case Studies for CASMART 3rd Student Design Challenge”, Shape Memory and Superelasticity, May (2022), https://doi.org/10.1007/s40830-022-00368-z
  15. S. Bakkar*, S. Thapliyal*, N. Ku, D. Berman, S.M. Aouadi, R.E. Brennan, and M.L. Young: “Controlling Anisotropy of Porous B4C Structures Through Magnetic Field-Assisted Freeze-Casting”, Ceramics International, November (2021) https://doi.org/10.1016/j.ceramint.2021.11.226
  16. M.T. Wall*, M. Carl*, J. Smith*, M.L. Young, Y. Ren, M. Raiford, and T. Ellis: “Novel Characterization of Lead-based Micro-alloys for Battery Applications”, Journal of Energy Storage, 44 A 103373, December (2021) https://doi.org/10.1016/j.est.2021.103373
  17. J. Smith*, J. Huh, A. Shelton, R.F. Reidy, and M.L. Young: “Laser-Assisted Field Evaporation of RBa2Cu3O7-δ (R = Gd, Sm) High-Temperature Superconducting Coated Conductors”, Microscopy and Microanalysis, in press, October (2021) https://doi.org/10.1017/S1431927621012794
  18. F. Gantz*, J.M. Rider*, N.A. Ley*, J. Ward*, J. Smith*, M.L. Young, and D. Forbes: “Processing, Preaging, and Aging of NiTi-20 at.%Hf High Temperature Shape Memory Alloy from Laboratory to Industrial Scale”, Shape Memory and Superelasticity, 7 447-457 August (2021) https://doi.org/10.1007/s40830-021-00345-y
  19. P.E. Caltagirone, R.W. Wheeler, O. Benafan, G. Bigelow, I. Karaman, M.L. Kuntz, P.B.C. Leal, H. Ozcan, A.P. Stebner, T. Turner, A.W. Young*, M.L. Young, and N. Zamani: “Second CASMART Student Design Challenge: Shape Memory Alloy-enabled Expandable Space Habitat”, Shape Memory and Superelasticity, 7 280–303, June (2021) https://doi.org/10.1007/s40830-021-00329-y
  20. F. Gantz*, N.A. Ley*, and M.L. Young: “Effect of Ni Content on Processing of Ni-rich NiTiHf High Temperature Shape Memory Alloy”, Shape Memory and Superelasticity, 7 262–269, June (2021) https://doi.org/10.1007/s40830-021-00324-3
  21. N.A. Ley*, M.L. Young, B.C. Hornbuckle, D.M. Field, and K. Limmer: “Toughness Enhancing Mechanisms in Age Hardened Fe-Mn-Al-C Steels”, Materials Science and Engineering A, 820 141518, May (2021) https://doi.org/10.1016/j.msea.2021.141518
  22. S. Bakkar*, M. Wall*, N. Ku, D. Berman, S.M. Aouadi, R.E. Brennan, and M.L. Young: “Al/Al2O3 Metal Matrix Composites Produced using Magnetic Field-Assisted Freeze Casting of Porous Ceramic Structures”, Journal of Materials Research, 36 2094–2106, March (2021) https://doi.org/10.1557/S43578-021-00159-9
  23. M.T. Wall*, J. Smith*, M. Carl*, M.L. Young, T. Hesterberg, and T. Ellis: “Growth Mechanisms of Nano-to-Micron-Sized Lead Sulfate Particles”, ACS Omega, 6 (16) 10557-10567, February (2021) https://pubs.acs.org/action/showCitFormats?doi=10.1021/acsomega.0c05722&ref=pdf
  24. W.S. Rubink*, V. Ageh*, H. Lide*, N.A. Ley*, M.L. Young, D.T. Casem, E.J. Faierson, and T.W. Scharf: “Spark Plasma Sintering of B4C and B4C-TiB2 Composites: Deformation and Failure Mechanisms under Quasistatic and Dynamic Loading”, Journal of the European Ceramic Society, 41 (6) 3321-3332, December (2020) https://doi.org/10.1016/j.jeurceramsoc.2021.01.044
  25. H. Yu*, Y. Qiu*, and M.L. Young: “Influence of Ni4Ti3 Precipitate on Pseudoelasticity of Austenitic NiTi Shape Memory Alloys Deformed at High Strain Rate”, Materials Science & Engineering A, 804 140753, February (2021) https://doi.org/10.1016/j.msea.2021.140753
  26. I. Cockerill*, C.W. See, M.L. Young, Y. Wang, and D. Zhu: “Designing Better Cardiovascular Stents: A Learning Curve”, Advanced Functional Materials, 31 2005361, November (2020) https://doi.org/10.1002/adfm.202005361
  27. S. Bakkar*, J. Lee*, N. Ku, D. Berman, S.M. Aouadi, R.E. Brennan, and M.L. Young: “Design of Porous Aluminum Oxide Ceramics Using Magnetic Field-Assisted Freeze-Casting”, Journal of Materials Research, 35 (21) 2859-2869, August (2020) https://doi.org/10.1557/jmr.2020.197
  28. C.R. Reynolds*, Z. Herl*, N.A. Ley*, D. Choudhuri, J.T. Lloyd, and M.L. Young: “Comparing CALPHAD Predictions with High Energy Synchrotron Radiation X-ray Diffraction Measurements During in situ Annealing of Al0.3CoCrFeNi High Entropy Alloy”, Materialia, 12 100784, August (2020) https://doi.org/10.1016/j.mtla.2020.100784
  29. S.R. Akanda, R.W. Wheeler, K.A. Rozman, J. Rider*, Ö.N. Doğan, M.L. Young, and J.A. Hawk: “Tensile Deformation Behavior of a Dissimilar Weldment of P91 and 347H Steels”, Strain,  56 (5) e12366, October (2020) https://doi.org/10.1111/str.12366
  30. I. Cockerill*, Y. Su, J.H. Lee*, D. Berman, M.L. Young, Y.F. Zheng, and D. Zhu: “Micro-/Nano-Topography on Bioresorbable Zinc Dictates Cytocompatibility, Bone Cell Differentiation, and Macrophage Polarization”, Nano Letters, 20 (6) 4594-4602, May (2020) https://doi.org/10.1021/acs.nanolett.0c01448
  31. I. Cockerill*, Y. Su, S. Sinha, Y.-X. Qin, Y.F. Zheng, M.L. Young, and D. Zhu: “Porous Zinc Scaffolds for Bone Tissue Engineering Applications: A Novel Additive Manufacturing and Casting Approach”, Materials Science & Engineering C, 110 110738 May (2020) doi: https://doi.org/10.1016/j.msec.2020.110738
  32. M.T. Wall*, M.V. Pantawane*, S. Joshi*, F. Gantz*, N.A. Ley*, R. Mayer, A. Spires, M.L. Young, and N. Dahotre: “Laser-coated CoFeNiCrAlTi High Entropy Alloy onto a H13 Steel Die Head”, Surface & Coatings Technology, 387 125473, April (2020) doi: https://doi.org/10.1016/j.surfcoat.2020.125473
  33. I. Cockerill*, R. Bitten*, B. Cloarec*, D. Zhu, S.M. Aoaudi, and M.L. Young: “Salt Preform Texturing of Absorbable Zn Substrates for Bone-implant Applications”, JOM, 72 (5) 1902-1909, December (2019) doi: https://doi.org/10.1007/s11837-019-03971-1
  34. S. Bakkar*, M.V. Pantawane*, J.J. Gu*, A. Ghoshal*, M. Walock, M. Murugan, M.L. Young, N. Dahotre, D. Berman, and S.M. Aouadi: “Laser Surface Modification of Porous Yttria Stabilized Zirconia Against CMAS Degradation”, Ceramics International, 46 (5)  6038-6045, April (2020) doi: https://doi.org/10.1016/j.ceramint.2019.11.061
  35. A.W. Young*, R.W. Wheeler, N.A. Ley*, O. Benafan, and M.L. Young: “Microstructural and Thermomechanical Comparison of Ni-Rich and Ni-Lean NiTi-20 at.% Hf High Temperature Shape Memory Alloy Wires”, Shape Memory and Superelasticity, 5 (4) 397-406, December (2019) doi: https://doi.org/10.1007/s40830-019-00255-0
  36. N.A. Ley*, J. Smith*, R.W. Wheeler, and M.L. Young “Effects of Thermo-Mechanical Processing on Precipitate Evolution in Ni-rich High Temperature Shape Memory Alloys”, Materialia, 8 100496, December (2019) doi: https://doi.org/10.1016/j.mtla.2019.100496
  37. N.A. Ley*, R.W. Wheeler, O. Benafan, and M.L. Young: “Characterization of Thermomechanically Processed High-Temperature Ni-Lean NiTi–20 at.% Hf Shape Memory Wires”, Shape Memory and Superelasticity, 5 (4) 476-485, November (2019) doi: https://doi.org/10.1007/s40830-019-00254-1
  38. N.A. Ley*, S. Segovia, S. Gorsse, and M.L. Young: “Characterization and Modeling of NbNiTaTiW and NbNiTaTiW-Al Refractory High Entropy Alloys”, Metallurgical and Materials Transactions A, 50 (10) 4867-4876, October (2019) doi: https://doi.org/10.1007/s11661-019-05384-w
  39. A. Dutt*, B. Gwalani, V. Tungala*, M. Carl*, R. Mishra, S. Tamirisakandala, M. Young, K. Cho, and R. Brennan: "A Novel Nano-particle Strengthened Titanium Alloy with Exceptional Specific Strength", Scientific Reports, 9 11726 August (2019) doi: https://doi.org/10.1038/s41598-019-48139-8
  40. H. Yu* and M.L. Young: “Effect of Temperature on Material Flow Behavior at High Strain Rate Deformation of Austenitic Shape Memory Alloys by Phenomenological Modeling”, Journal of Alloys and Compounds, 797 (5) 194-204, August (2019) doi: https://doi.org/10.1016/j.jallcom.2019.05.041
  41. B. Gwalani*, S. Gorsse, V. Soni*, M. Carl*, N. Ley*, J. Smith*, A.V. Ayyagari*, Y. Zheng*, M. Young, R.S. Mishra, and R. Banerjee: “Role of Copper on L12 Precipitation Strengthened fcc based High Entropy Alloy”, Materialia 100282 June (2019) doi: https://doi.org/10.1016/j.mtla.2019.100282
  42. M. Carl*, J. Smith*, R.W. Wheeler, Y. Ren, B. Van Doren, and M.L. Young: “High-Energy Synchrotron Radiation X-ray Diffraction Measurements during in situ Aging of a NiTi-15 at. % Hf High Temperature Shape Memory Alloy”, Materialia, 100220 March (2019) doi: https://doi.org/10.1016/j.mtla.2019.100220
  43. S. Briseño Murguia*, A. Clauser*, H. Dunn*, W. Fisher*, L. Mello*, Y. Snir*, and M.L. Young: “NiTi Shape Memory Alloy Helixes through Novel Processing”, Materialia, 5 100210 March (2019) doi: https://doi.org/10.1016/j.mtla.2019.100210
  44. A.W. Young*, T. Torgerson*, N.A. Ley*, K. Gomez*, O. Benafan, and M.L. Young: “Effects of Sn Addition on NiTi Shape Memory Alloys”, Shape Memory and Superelasticity, 5 (1), 125-135, March (2019) doi: https://doi.org/10.1007/s40830-018-00197-z
  45. E. Blackert*, S. Bakkar*, S. Briseño-Murguia*, M. Kramer*, J. Barclay*, M. Carl*, J. Smith*, M.L. Young, and S.M. Aouadi: “Textured TNZT Surfaces via Hydrothermal Treatments for Bone Implant Applications”, Thin Solid Films, 667 64-68, December (2018) doi: https://doi.org/10.1016/j.tsf.2018.07.055
  46. R.W. Wheeler, J. Smith*, N. Ley*, A.Giri, and M.L. Young: “Processing-Induced Strain Glass States in a Ni49.5Ti50.5 Shape Memory Alloy”, Applied Physics Letters, 113 (13) 131901, September (2018) doi: https://doi.org/10.1063/1.5049871
  47. M. Komarasamy*, S. Shukla*, N. Ley*, K. Cho, R. Brennan, M.L. Young, and R.S. Mishra: “A novel method to enhance CSL fraction, tensile properties and work hardening in complex concentrated alloys ― Lattice distortion effect”, Materials Science & Engineering A, 736 383-391, October (2018) doi: https://doi.org/10.1016/j.msea.2018.09.005
  48. N.A. Ley*, S.S. Joshi*, B. Zhang*, Y.-H. Ho*, N.B. Dahotre, and M.L. Young: “Laser Coating of a CrMoTaWZr Complex Concentrated Alloy onto a H13 Tool Steel Die Head”, Surface & Coatings Technology, 348 150-158, August (2018) doi: https://doi.org/10.1016/j.surfcoat.2018.02.038
  49. S. Briseño Murguia*, A. Clauser*, H. Dunn*, W. Grogg*, L. Mello*, Y. Snir, R.E. Brennan, and M.L. Young: “Low Pressure and Low Temperature Hydriding-Pulverization-Dehydriding Method for Producing Shape Memory Alloy Powders”, Shape Memory and Superelasticity, 4 (2) 313-326, June (2018) doi: https://doi.org/10.1007/s40830-018-0173-0
  50. M. Carl*, B. Van Doren, and M.L. Young: “In Situ Synchrotron Radiation X-ray Diffraction Study on Phase and Oxide Growth during a High Temperature Cycle of a NiTi-20 at.% Zr High Temperature Shape Memory Alloy”, Shape Memory and Superelasticity, 4 (1) 174-185, March (2018) doi: https://doi.org/10.1007/s40830-018-0149-0
  51. Y. Snir*, N.A. Ley*, M. Carl*, L. Mello*, and M.L. Young: “Effects of Hydrogen-charging on the Phase Transformation of Martensitic NiTi Shape Memory Alloy Wires”, Shape Memory and Superelasticity, 3 (4) 443-456, December (2017) doi: https://doi.org/10.1007/s40830-017-0127-y
  52. H. Yu* and M.L. Young: “Three-dimensional modeling of high strain rate deformation of austenitic shape memory alloys”, Smart Materials and Structures, 27 (1) 015031, December (2017) doi: https://doi.org/10.1088/1361-665X/aa9dce
  53. M. Carl*, J. Smith*, B. Van Doren, and M.L. Young: “Effect of Ni-content on the Transformation Temperatures in NiTi-20 at. % Zr High Temperature Shape Memory Alloys”, Metals, 7 (11) 511 1-15, November (2017) doi: 10.3390/met7110511
  54. D. Zhu, Y. Su, M.L. Young, J. Ma, Y. Zheng, and L. Tang: “Biological responses and mechanisms of human bone marrow mesenchymal stem cells to Zn and Mg biomaterials”, ACS Applied Materials & Interfaces, 9 (33) 27453-27461, August (2017) doi: 10.1021/acsami.7b06654
  55. H. Yu* and M.L. Young: “One-dimensional Thermomechanical Model for High Strain Rate Deformation of Austenitic Shape Memory Alloys”, Journal of Alloys and Compounds, 710 (5) 858-868, July (2017) doi: https://doi.org/10.1016/j.jallcom.2017.03.306
  56. J. N. Strickland*, B. Ohl*, G. Chitwood, K. Krishnan, G. Kohn, and M. L. Young: “Anisotropic Nature of Raw, Radially Strained, and Radially Strained and Aged Steel Tubes”, Materials Performance and Characterization, 6 (3) 346-361, May (2017) doi: https://doi.org/10.1520/MPC20160039
  57. Y. Qiu*, M.L. Young, and X. Nie: “High Strain Rate Compression of Martensitic NiTi Shape Memory Alloy at Different Temperatures”, Metallurgical and Materials Transactions A, 48 (2) 601-608, October (2016) doi: https://doi.org/10.1007/s11661-016-3857-0
  58. M. Carl*, B. Zhang*, and M.L. Young: “Texture and Strain Measurements from Bending of NiTi Shape Memory Alloy Wires”, Shape Memory and Superelasticity, 2 (3) 254-263, September (2016) doi: https://doi.org/10.1007/s40830-016-0073-0
  59. B. Zhang* and M.L. Young: “High Energy Synchrotron X-ray Diffraction Measurements of Simple Bending of Pseudoelastic NiTi Shape Memory Wires”, Powder Diffraction, 31 (2) 104-109 June (2016) doi: https://doi.org/10.1017/S0885715616000154
  60. M. Carl* and M.L. Young: “Complementary Analytical Methods for Analysis of Ag-Plated Cultural Heritage Objects”, Microchemical Journal, 126 307-315, May (2016) doi: https://doi.org/10.1016/j.microc.2015.12.019
  61. M. Komarasamy*, R.S. Mishra, S. Mukherjee, and M.L. Young: “Friction stir processed thermally stable immiscible nanostructured alloys”, JOM, 67 (12) 2820-2827, December (2015)
  62. Y. Qiu*, H. Yu*, and M.L. Young: “Mechanical Properties of NiTi-based Foam with High Porosity for Implant Applications”, Shape Memory and Superelasticity, 1 (4) 479-485, November (2015) doi: https://doi.org/10.1007/s40830-015-0040-1
  63. Y. Qiu*, M.L. Young, and Xu Nie: “Influence of Dynamic Compression on Phase Transformation of Martensitic NiTi Shape Memory Alloys”, Metallurgical and Materials Transactions A, 46 (10) 4661-4668, October (2015) doi: https://doi.org/10.1007/s11661-015-3063-5
  64. Y. Qiu*, M.L. Young, and Xu Nie: “High Strain Rate Compression of Martensitic NiTi Shape Memory Alloys”, Shape Memory and Superelasticity, 1 (3) 310-318, September (2015) doi: https://doi.org/10.1007/s40830-015-0035-y
  65. M.L. Young and D.C. Dunand: “Comparing Compositions of Modern Cast Bronze Sculptures: Optical Emission Spectroscopy vs. X-ray Fluorescence Spectroscopy”, JOM, 67 (7) 1646-1658, July (2015) doi: https://doi.org/10.1007/s11837-015-1445-1
  66. E. Turner*, M. Carl*, M.L. Young, and J. Thurman: “Laser Engraved Enamel”, The Enamellist Society Newsletter, 13 (1) 6-10, January (2015)
  67. T. Novak*, H. D. Vora*, R.S. Mishra, M.L. Young, and N.B. Dahotre: “Synthesis of Al0.5CoCrCuFeNi and Al0.5CoCrFeMnNi High-entropy Alloys by Laser Melting”, Metallurgical and Materials Transactions B, 45 (10) 1603-1607, October (2014)
  68. P.J.S. Buenconsejo, R. Zarnetta, M.L. Young, H. Brunken, A. Mehta, and A. Ludwig: “On the mechanism that leads to vanishing thermal hysteresis of the B2-R phase transformation in multilayered (TiNi)/(W) shape memory alloy thin films”, Thin Solid Films, 564 79-85, August (2014)
  69. O. Benafan, J. Brown, F.T. Calkins, P. Kumar, A. Stebner, T. Turner, R. Vaidyanathan, J. Webster, and M.L. Young: “Shape Memory Alloy Actuator Design: CASMART Collaborative Best Practices and Case Studies”, International Journal of Mechanics and Materials in Design, 10999 1569-1713, October (2013) doi: https://doi.org/10.1007/s10999-013-9227-9
  70. M.L. Young, S. Gollerthan*, A. Baruj, J. Frenzel, W. Schmahl, and G. Eggeler: “Strain Mapping of Crack Extension in Pseudoelastic NiTi Shape Memory Alloys during Static Loading”, Acta Materialia, 61 (15) 5800-5806, September (2013) doi: http://dx.doi.org/10.1016/j.actamat.2013.06.024
  71. M.L. Young, M. Frotscher*, H. Bei, T. Simon, E.P. George, and G. Eggeler: “Nanoindentation of Pseudoelastic NiTi containing Ni4Ti3 precipitates”, International Journal of Materials Research, 103 (12) 1434-1439 December (2012)
  72. M.L. Young, J.DeFouw, J. Frenzel, and D.C. Dunand: “Cast Replicated NiTiCu Foams with Superelastic Properties”, Metallurgical and Materials Transactions A, 43 (8) 2939-2944 August (2012)
  73. M.L. Young: “Archaeometallurgy using Synchrotron Radiation: A Review”, Reports on Progress in Physics, 75 (3) 036504 1-15 February (2012) doi: http://dx.doi.org/10.1088/0034-4885/75/3/036504
  74. D. Kurumlu*, E.J. Payton, M.L. Young, M. Schöbel, G. Requena, and G. Eggeler: “High Temperature Strength and Damage Evolution in Short Fiber Reinforced Aluminum Alloys Studied by Miniature Creep Testing and Synchrotron Microtomography”, Acta Materialia, 60 (1) 67-78 January (2012)
  75. D. Hunter, W. Osborn, K. Wang, N.V. Kazantseva, J. R. Hattrick-Simpers, R. Suchoski, R. Takahashi, M.L. Young, A. Mehta, L.A. Bendersky, S.E. Lofland, M. Wuttig, and I. Takeuchi: “Giant magnetostriction in annealed Co1-xFex thin films”, Nature, 2 518 November (2011)
  76. C. Maletta and M.L. Young: “Stress-induced Martensite in Front of Crack Tips in NiTi Shape Memory Alloys: Modeling Versus Experiments”, Journal of Materials Engineering and Performance, 20 (4-5) 597-604 July (2011)
  77. M.L. Young, F. Casadio, J. Marvin*, W.T. Chase, and D.C. Dunand: “An Ancient Chinese Bronze Fragment Reexamined after 50 Years: Contributions from Modern and Traditional Techniques”, Archaeometry, 52 1015-1043 October (2010)
  78. M.L. Young, F. Casadio, S. Schnepp, E. Pearlstein, J.D. Almer, and D.R. Haeffner: “Non-invasive characterization of manufacturing techniques and corrosion of ancient Chinese bronzes and a later replica using synchrotron X-ray diffraction”, Applied Physics A, 100 (3) 635-646 September (2010) doi: https://doi.org/10.1007/s00339-010-5646-8
  79. R. Zarnetta, R. Takahashi, M.L. Young, A. Savan, Y. Furuya, S. Thienhaus, B. Maass, M. Rahim, J. Frenzel, H. Brunken, Y.S. Chu, R.D. James, I. Takeuchi, G. Eggeler, and A. Ludwig: “Identification of Quaternary Shape Memory Alloys with Zero Thermal Hysteresis and Unprecedented Functional Stability”, Advanced Functional Materials, 20 (12) 1917-1923 May (2010) https://doi.org/10.1002/adfm.200902336
  80. L.-G. Bujoreanu, M.L. Young, S. Gollerthan*, Ch. Somsen, and G. Eggeler, “Influence of Heat Treatment and Microstructure on the Tensile Pseudoelastic Response of a Ni-rich NiTi Shape Memory Alloy”, International Journal of Materials Research, 101(5) 623-630 May (2010)
  81. M.L. Young, M.F.-X. Wagner, J. Frenzel, W.W. Schmahl, and G. Eggeler: “Phase Volume Fractions and Strain Measurements in an Ultrafine-grained NiTi Shape-memory Alloy during Tensile Loading”, Acta Materialia, 58 2344-2354 February (2010)
  82. S. Gollerthan*, M.L. Young, K. Neuking, and G. Eggeler: “Direct Physical Evidence for the Back Transformation of Stress-induced Martensite in the Vicinity of Cracks in Pseudoelastic NiTi Shape Memory Alloys”, Acta Materialia, 57 (19) 5892-5897 November (2009)
  83. M.L. Young, J.D. Almer, D.R. Haeffner, R. Rao, J. A. Lewis, and D.C. Dunand: “Effect of Ceramic Preform Geometry on Load Partitioning in Al2O3-Al Composites with Three-Dimensional Periodic Architecture”, Materials Science and Engineering A, 526 (1-2), 190-196 November (2009)
  84. M.L. Young, S. Schnepp, F. Casadio, A. Lins, M. Meighan, J.B. Lambert, and D.C. Dunand: “Matisse to Picasso: A Compositional Study of Modern Bronze Sculptures”, Analytical & Bioanalytical Chemistry, 395 (1), 171-184 September (2009) doi: https://doi.org/10.1007/s00216-009-2938-y
  85. J. Olbricht*, A. Yawny, M.L. Young, and G. Eggeler: “Mechanical and Microstructural Observations during Compression Creep of a Short Fiber Reinforced AlMg Metal Matrix Composite”, Materials Science and Engineering A, 510-511, 407-412 June (2009) doi: https://doi.org/10.1016/j.msea.2008.05.057
  86. M.L. Young, R. Rao, J.D. Almer, D.R. Haeffner, J. A. Lewis, and D.C. Dunand: “Load Partitioning in Al2O3-Al Composites with Three-dimensional Periodic Architecture”, Acta Materialia, 57 (8) 2362-2375 April (2009)
  87. S. Gollerthan*, M.L. Young, A. Baruj, J. Frenzel, W. Schmahl, and G. Eggeler: “Fracture Mechanics and Microstructure in NiTi Shape Memory Alloys”, Acta Materialia, 57 (4) 1015-1025 February (2009) doi: https://doi.org/10.1016/j.actamat.2008.10.055
  88. E.S. Friedman, A. Brody, M.L. Young, J.D. Almer, C.U. Segre, and S. Mini: “Synchrotron Radiation-based X-ray Analysis of Bronze Artifacts from an Iron Age site in the Judean Hills”, Journal of Archaeological Science, 35 (7), 1951-1960 July (2008)
  89. M.R. Daymond, M.L. Young, J.D. Almer, and D.C. Dunand: “Strain and Texture Evolution during Mechanical Loading of a Crack Tip in Martensitic Shape-memory NiTi”, Acta Materialia, 55 (11), 3929-3942 June (2007)
  90. M.L. Young, J. Defouw, J.D. Almer, D.R. Haeffner, and D.C. Dunand: “Load Partitioning during Compressive Loading of a Mg/MgB2 Composite”, Acta Materialia, 55 (10), 3467-3478 June (2007)
  91. M.L. Young, J.D. Almer, U. Lienert, M.R. Daymond, D.R. Haeffner, and D.C. Dunand: “Load Partitioning between Ferrite and Cementite during Elasto-Plastic Deformation of an Ultrahigh-Carbon Steel”, Acta Materialia, 55 (6), 1999-2011 April (2007) doi: https://doi.org/10.1016/j.actamat.2006.11.004
  92. T.E. Wilkes, M.L. Young, R.E. Sepulveda, D.C. Dunand, and K.T. Faber: “Composites by Aluminum Infiltration of Porous Silicon Carbide Derived from Wood Precursors”, Scripta Materialia, 55 (12), 1083-1086 December (2006) doi: https://doi.org/10.1016/j.scriptamat.2006.08.040
  93. E.S. Friedman, A. Brody, M.L. Young, D. Peterson, and S. Mini: “High Energy Synchrotron Radiation Studies of Tin-Bronze Artifacts from Tell en-Nasbeh, Northern Judah, ca. 1000-586 BCE”, 5th International Conference on Synchrotron Radiation in Materials Science Conference Proceedings, June (2006)
  94. M.L. Young, F. Casadio, S. Schnepp, J.D. Almer, D.R. Haeffner, and D.C. Dunand: “Synchrotron X-ray Diffraction and Imaging of Ancient Chinese Bronzes”, Applied Physics A: Materials Science & Processing, 83 (2), 163-168 February (2006) doi: https://doi.org/10.1007/s00339-006-3504-5

Conference Presentations​

  1. Marcus L. Young, “Insights on Processing and Characterization of Shape Memory Alloys”, oral presentation: Saarland University, Center for Mechatronics and Automation Technologies (ZeMA), Saarbrücken, Deutschland, November (2023)
  2. Grant Spencer*, Marcus L. Young, Subhas Chalasani, and Travis Hesterberg: “In Situ Imaging and Phase Analysis of Live Cell Lead Battery Materials from Auxiliary Battery Cycling Testing Regimes”, invited oral presentation, Consortium for Battery Innovation North American Technical Meeting, Philadelphia, PA, USA, November (2023)
  3. Andre Montagnoli*, Jan Frenzel, Marcus L. Young, Tad F. Calkins, and Doug Nicholson: “The Influence of Substitutional Elements in Hysteresis Reduction and Thermo-Mechanical Stability of Shape Memory Alloys”, oral presentation, ASME 2023 Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2023), October (2023)
  4. Faith Gantz*, Nehal Al Jabri*, Dominique Worrell*, Marcus L. Young, and Art Palisoc: “Thermomechanical Processing of Shape Memory Alloy NiTiCu Shape Memory Alloy from Ingot Button to Wire”, oral presentation, ASME 2023 Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2023), October (2023)
  5. Sophia R. Cooper*, Samir M. Aouadi, Andrey A. Voevodin, Anindya Ghoshal, and Marcus L. Young: “Thermomechanical Study of High Temperature NiTi-Zr and NiTi-Zr,Cu Shape Memory Alloys”, oral presentation, ASME 2023 Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2023), October (2023)
  6. Sophia Cooper*, Samir M. Aouadi, Andrey A. Voevodin, Anindya Ghoshal, and Marcus L. Young: “Development and Characterization of High Temperature NiTi-Zr and NiTiZr,Cu Shape Memory Alloys”, oral presentation: 31st International Materials Research Congress, Cancun, Mexico, August (2023)
  7. Jessica Harris*, Christopher R. Reynolds*, Ankita Roy*, Rajiv S. Mishra, Marcus L. Young, and Dmitry Popov: “Effect of V and Cu on Phase Stability of FeMnCrCoSi High Entropy Alloys Under High Pressure Loading Using Powder Samples”, oral presentation, 23rd Biennial Conference of the APS Topical Group on Shock Compression of Condensed Matter (SHOCK23), Chicago, Illinois, USA June (2023)
  8. Grant Spencer* and Marcus L. Young: “Advanced Characterization Tools to Solve Industry’s Lead Acid Battery Challenges”, poster presentation, Workshop for Automotive Lead Battery Advancements (ALBA), Wolfsburg, Germany, June (2023)
  9. Grant Spencer*, Marcus L. Young, Subhas Chalasani, and Travis Hesterberg: “Advanced Characterization of Lead-acid Mini-cells with Focus on Positive Active Materials Grant”, invited oral presentation, Consortium for Battery Innovation European Technical Meeting, Wolfsburg, Germany, June (2023)
  10. Jin Kim*, Willow Knight*, Justin Ohl*, and Robert Wilkins*; Mentor: Dr. Marcus L. Young: “Comparison between Rigid and Ductile Materials for Tuning Forks”, poster, paper, and video presentations, Forging Industry Educational and Research Foundation (FIERF) 1st Student Forging Competition at the Foundation Industry Association’s (FIA) Forge Fair 2023, Cleveland, OH, USA, May (2023) – Closest to the Frequency Award Winner
  11. Andre L. Montagnoli*, Marcus L. Young, Doug E. Nicholson, F. Tad Calkins, and Jan Frenzel: “Development, Processing, and Characterization of Low Hysteresis Shape Memory Alloys for Satellite Actuators”, poster presentation: UNT’s Local Chapter MRS 3rd Annual Poster Competition, Denton, TX, USA, April (2023)
  12. Choong Lee*, Justin Cooper, Matthew Carl*, and Marcus L. Young: “Effects of Surface Treatment on Repair Methods for Trumpet Piston Valves”, oral presentation: ASEE Gulf Southwest Conference, Denton, TX, USA, March (2023)
  13. Marcus L. Young, Subhas Chalasani, and Travis Hesterberg: “In Situ Imaging and Phase Analysis of Live Cell Lead Battery Materials” oral presentation: Consortium for Battery Innovation North American Technical Meeting, Durham, NC, USA November (2022)
  14. Faith Gantz*, Alexander R. Demblon, Ibrahim Karaman, and Marcus L. Young: “Phase and Strain Analysis using Synchrotron Radiation X-Ray Diffraction on Ni-rich High Temperature Shape Memory Alloys after Partial Thermal Cycled Fatigue Testing”, oral presentation: Society of Engineering Science 56th Annual Technical Meeting, College Station, TX, USA, October (2022)
  15. Andre Montagnoli*, Jan Frenzel, Marcus L. Young, Tad F. Calkins, and Doug Nicholson: “Characterization, Processing, and Thermo-mechanical Behavior of Ti-Ni-Cu-Pd Low Hysteresis Shape Memory Alloys”, oral presentation: Society of Engineering Science 56th Annual Technical Meeting, College Station, TX, USA, October (2022)
  16. Willow Knight*, Faith Gantz*, Matthew Carl*, Marcus L. Young, Brigitte Kovacevich, Dawn Crawford, Elena Torok, and Fran Baas, “Complementary Scientific Techniques for the Study of Mesoamerican Greenstone Objects”, oral presentation: ASM’s Materials Science and Technology (MS&T) Technical Meeting and Exhibition (MS&T), Pittsburgh, PA, USA, October (2022)
  17. Sophia Cooper*, Samir M. Aouadi, Andrey A. Voevodin, Anindya Ghoshal, Victoria Blair, and Marcus L. Young: “Phase Evolution and Oxidation Study of Combinatorially Designed Hf-Al-Si Refractory Complex Concentrated Alloy for High Temperature Applications”, oral presentation: ASM’s Materials Science and Technology (MS&T) Technical Meeting and Exhibition (MS&T), Pittsburgh, PA, USA, October (2022)
  18. Gerardo Gamboa*, Zane Wright*, Said Bakkar, Diana Berman, Samir Aouadi, Nicholas Ku, and Raymond E Brennan, and Marcus L. Young: “Design and Performance of Metal Matrix Composite Composed of Porous Boron Carbide Created by Magnetic Field-assisted Freeze Casting Infiltrated with Aluminum (A356)”, oral presentation: 30th International Materials Research Congress, Cancun, Mexico, August (2022)
  19. Marcus L. Young: “Insights on Processing and Characterization of NiTi-based High Temperature Shape Memory Alloys”, oral presentation: 30th International Materials Research Congress, Cancun, Mexico, August (2022)
  20. Sophia Cooper*, Samir M. Aouadi, Andrey A. Voevodin, Anindya Ghoshal, Victoria Blair, and Marcus L. Young: “2D Microhardness Mapping of Combinatorially Designed Hf-Al-Si Refractory Complex Concentrated Alloys”, oral presentation: 30th International Materials Research Congress, Cancun, Mexico, August (2022)
  21. Marcus L. Young, “A Brief Overview of Processing and Characterization of NiTi-based High Temperature Shape Memory Alloys”, invited oral presentation: Chemnitz University of Technology, July (2022)
  22. Marcus L. Young, “Insights on Processing and Characterization of NiTi-based High Temperature Shape Memory Alloys”, invited oral presentation: Institute of Physics of the Czech Academy of Sciences, Department of Functional Materials, Prague, Czech Republic, June (2022)
  23. Faith Gantz*, Alexander R. Demblon, Marcus L. Young, and Ibrahim Karaman: “Effect of Partial Thermal Cycles During Fatigue Testing of Ni-Rich High Temperature Shape Memory Alloys Using Synchrotron Radiation X-Ray Diffraction”, oral presentation: 19th U.S. National Congress on Theoretical and Applied Mechanics, Austin, TX, USA, June (2022)
  24. Nehal Al Jabri*, Marcus L. Young, Steven Widelitz, and Art Palisoc: “Processing and Shape-Setting of Shape Memory Alloys for Small Satellite Antennas (ShaMAn)”, oral presentation: 19th U.S. National Congress on Theoretical and Applied Mechanics, Austin, TX, USA, June (2022)
  25. Andre Montagnoli*, Takahiro Yamazaki, Marcus L. Young, and Ichiro Takeuchi: “Transformation Tuning of Shape Memory Alloys for Thermoelastic Active Regenerators with Giant dT”, oral presentation19th U.S. National Congress on Theoretical and Applied Mechanics, Austin, TX, USA, June (2022)
  26. Bailey Ashmore*, Marcus L. Young, and Anit Giri: “Processing-Induced Strain Glass States in a Fe-Mn-Al-Cr-Ni Alloy”, oral presentation: 19th U.S. National Congress on Theoretical and Applied Mechanics, Austin, TX, USA, June (2022)
  27. Michael T. Wall*, Mangesh V. Pantawane*, Sameehan Joshi, Rob Mayer, Narendra Dahotre, and Marcus L. Young; “Laser-coated Fe0.40Co0.20Ni0.20Cr0.10Ti0.06Al0.04 Complex Concentrated Alloy and Fe0.45Mn0.40Al0.15 Shape Memory Alloy onto Forging Steel Material”, oral presentation: 23rd International Forging Congress (IFC), Chicago, IL, USA, June (2022)
  28. Sophia Cooper*, Samir M. Aouadi, Andrey A. Voevodin, Anindya Ghoshal, Victoria Blair, and Marcus L. Young: “2D Phase Mapping of Combinatorially Designed Hf-Al-Si Refractory Complex Concentrated Alloy”, oral presentation: 48th International Conference on Metallurgical Coatings and Thin Films (ICMCTF), San Diego, CA, USA, May (2022)
  29. Faith Gantz*, Michael Wall*, Marcus L. Young, and Drew Forbes; “Effect of Flash Annealing on the Microstructure and Fatigue Life of a Ni-rich NiTi-20 at.% Hf High Temperature Shape Memory Alloys”, oral presentation: International Conference on Shape Memory and Superelastic Technologies (SMST), San Diego, CA, USA, May (2022)
  30. Neha S. John*, Bailey Ashmore*, Nathan A. Ley*, Jesse Smith*, Robert W. Wheeler, Anit K. Giri, and Marcus L. Young: “Comparative Analysis of Process-Induced Strain Glass States in Austenitic and Martensitic NiTi Shape Memory Alloy Plates”, oral presentation: International Conference on Shape Memory and Superelastic Technologies (SMST), San Diego, CA, USA, May (2022)
  31. Andre Montagnoli*, Neha S. John*, Marcus L. Young, and Micheal Bass: “Development and Mechanical Testing of Low Hysteresis Shape Memory Alloys”, oral presentation: International Conference on Shape Memory and Superelastic Technologies (SMST), San Diego, CA, USA, May (2022)
  32. Faith Gantz*, Nathan A. Ley*, Marcus L. Young, Alex Demblon, Jacob Mingear, Hande Ozcan, Raj Vaidyanathan, Othmane Benafan, Glen Bigelow, Travis Turner, Robert W. Wheeler, Matthew Carl, Micheal Bass, Frederic T. Calkins, Douglas Nicholson, Jeff Brown, and Ibraheem Khan: “Melting and Processing of Shape Memory Alloys: A CASMART Review”, oral presentation: International Conference on Shape Memory and Superelastic Technologies (SMST), San Diego, CA, USA, May (2022)
  33. Marcus L. Young, “Thermo-mechanical Processing and Advanced Characterization of NiTi-based High Temperature Shape Memory Alloys”, invited oral presentation: Technical University Berg Academy Freiberg, May (2022)
  34. Marcus L. Young, “Insights on Processing and Characterization of NiTi-based High Temperature Shape Memory Alloys”, invited oral presentation: Ruhr University Bochum, April (2022)
  35. Jin Kim*, Jonathan Maldonado*, Andres Santiesteban*, and Jason Summers*; Mentor: Dr. Marcus L. Young: “Japanese Bunga Knife”, oral presentation: 6th Annual Bladesmithing Competition at TMS 150t Annual Meeting & Exhibition, San Diego, CA, USA, February (2022)
  36. C.R. Reynolds*, Alden Watts*, M.L. Young, R.S. Mishra, and J.T. Lloyd: “High-Pressure Induced Phase Transitions of a Metastable Complex Concentrated Alloy System with Varying Stacking Faults”, oral presentation:  2nd World Congress on High Entropy Alloys, Charlotte, North Carolina, USA, November (2021)
  37. Michael Wall* and Marcus L. Young: “Alloy Coatings in Forging Dies”, invited oral presentation: Joint Defense Manufacturing Technology Program, Charleston, SC, USA, Online, September (2021)
  38. Andre Montagnoli*, Neha S. John*, and Marcus L. Young: “Thermal Response and Thermo-mechanical Behavior of Low Hysteresis Shape Memory Alloys”, invited oral presentation: 29th International Materials Research Congress, Cancun, Mexico, Online, August (2021)
  39. Micheal Bass, Paul Cizmas, Dimitris Lagoudas, Christopher Limbach, James Mabe, and Marcus L. Young: “Design of Morphing Quiet Supersonic Aircraft: A Multi-disciplinary, Multi-physics Approach”, oral presentation, NASA University Leadership Initiative Tech Talks, USA, Online, May (2021)
  40. Michael Wall*, Joseph McCool*, Caroline White*, Yuheng Wang*, and Marcus L. Young: “Compositional and Structural Analysis of Early Chinese Currencies”, oral presentation, ASM’s Materials Science and Technology (MS&T) Technical Meeting and Exhibition, Pittsburgh, PA, USA, Online, October (2020)
  41. Faith Gantz*, Nathan A. Ley*, Jessica Rider*, Jordyn M. Ward*, Drew Forbes, and Marcus L. Young: “Microstructure and Mechanical Properties of Pre-Aged Thermo-Mechanically Processed NiTiHf Shape Memory Alloy”, oral presentation, ASM’s Materials Science and Technology (MS&T) Technical Meeting and Exhibition, Pittsburgh, PA, USA, Online, October (2020)
  42. Said Bakkar*, Ji Hyung Lee*, Nicholas Ku, Diana Berman, Samir M. Aouadi, Raymond E. Brennan, and Marcus L. Young: “Processing and Characterization of Al/Al2O3 Metal Matrix Composites Produced Using Magnetic Field-Assisted Freeze-Casting of Porous Ceramic Structures”, oral presentation, ASM’s Materials Science and Technology (MS&T) Technical Meeting and Exhibition, Pittsburgh, PA, USA, Online, October (2020)
  43. Nathan A. Ley*, Faith Gantz*, Jordyn M. Ward*, Jessica Rider*, Drew Forbes, and Marcus L. Young: “Shape Memory and Mechanical Properties of Pre-Aged Thermo-Mechanically Processed High Hf Containing NiTiHf”, oral presentation, ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Irvine. CA, USA, Online, September (2020)
  44. Michael Wall*, Jesse Smith*, Marcus L. Young, Yang Ren, Matthew Raiford, and Tim Ellis: “Growth Mechanisms of Nano- to Micron-sized Lead Sulfate Particles”, oral presentation: 17th European Lead Battery Conference and Exhibition (ELBC17), Milan, Italy, Online, September (2020)
  45. Nathan A. Ley*, Marcus L. Young, B.Chad Hornbuckle, Daniel M. Field, and Krista Limmer: “Advanced Characterization Study of Carbide Evolution in Fe-Mn-Al-C Steel”, invited oral presentation, FeMnAl Technical Review Meeting, Online, June (2020)
  46. Marcus L. Young: “Shape Memory Alloys for DoD Applications”, invited oral presentation, Defense Systems Information Analysis Center (DSIAC) Webinar, Denton, TX, USA, Online, April (2020)
  47. Said Bakkar, Marcus L. Young, Diana Berman, and Samir M. Aouadi: “Laser Surface Modification of Porous Yttria Stabilized Zirconia Against CMAS Degradation”, poster presentation, 3rd Annual STLE North Texas Student Paper Symposium, Denton, TX, USA, February (2020) – 2nd Place Graduate Student Winner 
  48. Neha John*, Maddox Dockins*, Spencer Gellerup*, Bryce Freeman*, and Jordyn Ward*; Mentor: Dr. Marcus L. Young: “Crucible Steel Processing Methods”, oral presentation: 5th Annual Bladesmithing Competition at TMS 150th Annual Meeting & Exhibition, San Diego, CA, USA, February (2020)
  49. Jesse Smith*, Michael Wall*, Marcus L. Young, and Tim Ellis: “Nucleation and Growth of Lead Sulfate Nanoparticles”, oral presentation, 9th International Symposium on Lead and Zinc Processing (PbZn 2020), San Diego, CA, USA, February (2020)
  50. Sanket Bhoyate*, Marcus L. Young, and Wonbong Choi: “High Performance Zn-ion Batteries by Additive Manufacturing”, oral presentation, TMS 150th Annual Meeting & Exhibition, San Diego, CA, USA, February (2020)
  51. Christopher R. Reynolds*, Deep Choudhuri, Zachary Herl*, Marcus L. Young, and Jeffrey T. Lloyd: “High Energy Synchrotron Radiation X-Ray Diffraction Measurements on Al0.3CoCrFeNi High Entropy Alloy during in situ Annealing”, oral presentation, 1st World Congress on High Entropy Alloys, Seattle, WA, USA, November (2019)
  52. Christopher R. Reynolds*, Deep Choudhuri, Marcus L. Young, and Jeffrey T. Lloyd: “Cold Working of Al0.3CoCrFeNi High Entropy Alloy”, poster presentation, 1st World Congress on High Entropy Alloys, Seattle, WA, USA, November (2019)
  53. Said Bakkar*, Mangesh. Pantawane*, Marcus L. Young, Diana Berman, Narendra Dahotre, and Samir M. Aouadi: “Laser Surface Modification of Porous Yttria Stabilized Zirconia Against CMAS Degradation”, oral presentation, ASM’s 10th North Texas Inter-University Materials Science and Engineering Symposium, Denton, Texas, USA, November (2019)
  54. Sanket Bhoyate*, Irsalan Cockerill*, Marcus L. Young, and Wonbong Choi: “3D Zinc Anodes for High Performance Zn-ion Batteries”, oral presentation, ASM’s 10th North Texas Inter-University Materials Science and Engineering Symposium, Denton, Texas, USA, November (2019) – 2nd Place Graduate Winner
  55. Jordyn Ward*, Nathan A. Ley*, Robert W. Wheeler, Brian Van Doren, and Marcus L. Young: “An Aging Study on H-phase Growth in Thermo-mechanically Processed NiTiZr High Temperature Shape Memory Alloys”, oral presentation, ASM’s 10th North Texas Inter-University Materials Science and Engineering Symposium, Denton, Texas, USA, November (2019) – 2nd Place Undergraduate Winner
  56. Irsalan Cockerill*, Marcus L. Young, and Donghui Zhu: “Lost Salt Templating of Zn Porous Scaffolds for Bone Tissue Engineering”, oral presentation, ASM’s Materials Science and Technology (MS&T) Technical Meeting and Exhibition, Portland, OR, USA, October (2019)
  57. Nathan A. Ley*, Marcus L. Young, B. Chad Hornbuckle, Daniel M. Field, and Krista Limmer: “Synchrotron Radiation X-ray Diffraction Studies of Carbide Evolution in Fe-Mn-Al-C Steel”, oral presentation, ASM’s Materials Science and Technology (MS&T) Technical Meeting and Exhibition, Portland, OR, USA, October (2019)
  58. Faith Gantz*, Nathan A. Ley*, and Marcus L. Young: “Effects of Ni During Thermo-mechanical Processing in Ni-rich NiTiHf High Temperature Shape Memory Alloy”, oral presentation, ASM’s Materials Science and Technology (MS&T) Technical Meeting and Exhibition, Portland, OR, USA, October (2019)
  59. Avery W. Young*, Robert W. Wheeler, Nathan A. Ley*, Othmane Benafan, and Marcus L. Young: “Effects of High Temperature Oxides on the Thermomechanical Properties of NiTiHf20 Shape Memory Alloy Wires”, oral presentation, ASM’s Materials Science and Technology (MS&T) Technical Meeting and Exhibition, Portland, OR, USA, October (2019)
  60. Nathan A. Ley*, Choong-Yip Lee*, Robert W. Wheeler, Dimitris Lagoudas, and Marcus L. Young: “Synchrotron Radiation X-Ray Diffraction Measurements on Non-Metallic Inclusions and Their Effect on Fatigue Life in NiTiHf High Temperature Shape Memory Alloys”, invited oral presentation, ASM’s Materials Science and Technology (MS&T) Technical Meeting and Exhibition, Portland, OR, USA, October (2019)
  61. Said Bakkar*, Mangesh Pantawane*, Marcus L. Young, Diana Berman, Narendra Dahotre, and Samir M. Aouadi: “Surface Modification of Yttria Stabilized Zirconia Thermal Barrier Coatings Produced by Freeze Casting”, invited oral presentation, ASM’s Materials Science and Technology (MS&T) Technical Meeting and Exhibition, Portland, OR, USA, October (2019)
  62. Jordyn Ward*, Nathan A. Ley*, Robert W. Wheeler, Brian Van Doren, and Marcus L. Young: “Effects of Heat Treatments on H-phase Growth in Thermomechanically Processed NiTiZr”, oral presentation, ASM’s Materials Science and Technology (MS&T) Technical Meeting and Exhibition, Portland, OR, USA, October (2019)
  63. Ji Hyung Lee*, Robert W. Wheeler, Samir M. Aouadi, Diana Berman, Marcus L. Young, and Raymond E. Brennan: “Magnetic Field-Assisted Freeze Casting of Porous Ceramic Structures”, oral presentation, ASM’s Materials Science and Technology (MS&T) Technical Meeting and Exhibition, Portland, OR, USA, October (2019)
  64. Robert W. Wheeler, Jessica Rider*, Nathan A. Ley*, Jesse Smith*, Anit K. Giri, and Marcus L. Young: “Macroscopic Ferroelastic Response of Processing-Induced Strain Glass Alloys under Tension, Compression, and Bending”, oral presentation, ASM’s Materials Science and Technology (MS&T) Technical Meeting and Exhibition, Portland, OR, USA, October (2019)
  65. Neha John*, Nathan A. Ley*, Robert W. Wheeler, and Marcus L. Young: “Cold Work-Induced Strain Glass States in Ni49.5Ti50.5 SMA Plates”, oral presentation, ASM’s Materials Science and Technology (MS&T) Technical Meeting and Exhibition, Portland, OR, USA, October (2019)
  66. Marcus L. Young and Andrey Voevodin: “Connecting Materials Science & Engineering Undergraduate Education with Other Majors”, invited oral presentation, Material Science Undergraduate Education Conference, University Park, PA, USA, September (2019)
  67. Nathan A. Ley*, Alexander. Demblon, Robert W. Wheeler, Drew Forbes, Yang Ren, Ibrahim Karaman, and Marcus L. Young: “In Situ Synchrotron Radiation X-ray Diffraction Study of Nano-precipitate Growth in a Thermomechanically Processed Ni-rich High Temperature Shape Memory Alloy”, oral presentation, European Congress and Exhibition on Advanced Materials and Processes (EuroMat), Stockholm, Sweden, September (2019) 
  68. Avery W. Young*, Nathan A. Ley*, Robert W. Wheeler, Othmane Benafan, and Marcus L. Young: “Development and Process Optimization for NiTiHf20 Shape Memory Alloy Wires for High Temperature Actuator Applications”, oral presentation, European Congress and Exhibition on Advanced Materials and Processes (EuroMat), Stockholm, Sweden, September (2019) 
  69. Marcus L. Young, Ji Hyung Lee*, Robert W. Wheeler, Samir M. Aouadi, Diana Berman, and Raymond E. Brennan: “A Brief Review of Fabricating Porous Structures via Freeze-casting”, invited oral presentation, European Congress and Exhibition on Advanced Materials and Processes (EuroMat), Stockholm, Sweden, September (2019) 
  70. Kelsa Adams*, Michael Ayers*, Jordan Barnes*, Robert Boone*, David Evers*, Brittany Thurstin*, Robert W. Wheeler, Marcus L. Young and Richard Zhang: “A Novel Application of Shape Memory Alloys for CubeSat Solar Array Actuation”, oral and poster presentation: Student Design Challenge, International Conference on Shape Memory and Superelastic Technologies (SMST), Konstanz, Germany, May (2019) – 1st Place Winner
  71. Faith Gantz*, Mora Issa*, Skye Segovia*, Xiaowei Wang*, and Marcus L. Young: “Cu-based High Temperature Shape Memory Alloys for Deployment and Orientation Systems in a 3U Cubesat”, oral and poster presentation: Student Design Challenge, International Conference on Shape Memory and Superelastic Technologies (SMST), Konstanz, Germany, May (2019)
  72. Faith Gantz*, Nathan A. Ley*, Jesse Smith*, Robert W. Wheeler, and Marcus L. Young: “Effects of Nickel in Ni-rich NiTiHf15 High-Temperature Shape Memory Alloys during Thermomechanical Processing”, poster presentation, International Conference on Shape Memory and Superelastic Technologies (SMST), Konstanz, Germany, May (2019) – 2nd Place Winner for 1st Annual SMST Poster Competition
  73. Avery W. Young*, Nathan A. Ley*, Robert W. Wheeler, Othmane Benafan, and Marcus L. Young: “Thermomechanical Processability of Ni-rich NiTiHf20 High Temperature Shape Memory Alloy Wires”, oral presentation, International Conference on Shape Memory and Superelastic Technologies (SMST), Konstanz, Germany, May (2019)
  74. Robert W. Wheeler, Choong Yip Lee*, Jesse Smith*, Nathan A. Ley*, Anit Giri, and Marcus L. Young: “Processing-Induced Strain Glass Alloys in NiTi-based Shape Memory Alloy Material Systems”, oral presentation, International Conference on Shape Memory and Superelastic Technologies (SMST), Konstanz, Germany, May (2019)
  75. Nathan A. Ley*, Choong-Yip Lee*, Robert W. Wheeler, and Marcus L. Young: “Non-Metallic Inclusion Measurements using Synchrotron Radiation X-Ray Diffraction and Their Effect on Fatigue Life in NiTiHf High Temperature Shape Memory Alloys”, oral presentation, International Union of Theoretical and Applied Mechanics (IUTAM), Austin, TX, USA, April (2019) 
  76. Anit Giri, Robert W. Wheeler, Jesse Smith*, Nathan Ley*, and Marcus L. Young: “Processing-Induced Strain Glass States in a Ni49.5Ti50.5 Shape Memory Alloy”, oral presentation: TMS 148th Annual Meeting & Exhibition, San Antonio, TX, USA, March (2019)
  77. Matt Carl*, Michael Wall*, Jesse Smith*, Matthew Raiford, Timothy Ellis, Yang Ren, Richard Reidy, and Marcus L. Young: “High Resolution in situ SR-XRD Studies of Pure Pb, Pb-Bi, and Pb-Ba Foils at Elevated Temperatures”, oral presentation: TMS 148th Annual Meeting & Exhibition, San Antonio, TX, USA, March (2019) 
  78. Nathan Ley*, Robert W. Wheeler, and Marcus L. Young: “Thermo-Mechanical Processing and Advanced Characterization of NiTi and NiTiHf Shape Memory Alloys”, invited oral presentation, APS User Symposium, Chicago, IL, USA, March (2019)
  79. Faith Gantz*, Nathan A. Ley*, Robert W. Wheeler, and Marcus L. Young: “Thermo-mechanical of Processing Ni-rich NiTiHf High Temperature Shape Memory Alloys”, oral and poster presentation, Society of Women Engineers’ WE Local, St. Louis, MO, USA, March (2019)
  80. Emily Villarreal*, Fran Baas, and Marcus L. Young: “Elemental Characterization of Modern French Bronze Sculptures”, poster presentation, UNT Symposium Building A Better World: Celebrating Women in STEM, Denton, TX, USA, March (2019)
  81. Marcus L. Young, Nathan Ley*, Skye Segovia*, Robert W. Wheeler, Omer Karakoc, Alexander Demblon, and Ibrahim Karaman: “Characterization and Processing of High Temperature Shape Memory Alloys for Aerospace Applications”, oral presentation: AIAA Science and Technology Forum and Exposition, San Diego, CA, USA, January (2019)
  82. Michael Wall*, Matt Carl*, Jesse Smith*, Marcus L. Young, Yang Ren, Matthew Raiford, and Timothy Ellis: “High Resolution in situ SR-XRD Studies of Pure Pb, Pb-Bi, and Pb-Ba Foils at Elevated Temperatures”, oral presentation: ASM’s 9th North Texas Inter-University Materials Science and Engineering Symposium, Arlington, TX, USA, November (2018) – 3rd Place Winner (tie)
  83. Nathan A. Ley*, Jesse Smith*, and Marcus L. Young: “Effects of Thermo-Mechanical Processing on Precipitate Size and Shape in Ni-rich High Temperature Shape Memory Alloys”, oral presentation: ASM’s 9th North Texas Inter-University Materials Science and Engineering Symposium, Arlington, TX, USA, November (2018) – 3rd Place Winner (tie)
  84. Michael Wall*, Darryl Hammock, and Marcus L. Young: “Use of Direct Metal Deposition Additive Manufacturing Techniques for Forging Die Repair”, oral presentation: 32nd Forging Industry Technical Conference, Long Beach, CA, USA, September (2018)
  85. Robert W. Wheeler, Jesse Smith*, Nathan A. Ley*, Kelly Jacques*, Anit Giri, and Marcus L. Young: “Development and Characterization of Damage-Induced Strain Glass Alloys in Ni49.5Ti50.5”, oral presentation: ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, San Antonio, TX, USA, September (2018)
  86. Nathan A. Ley*, Jesse Smith*, and Marcus L. Young: “Effects of Thermo-Mechanical Processing on Precipitate Evolution in Ni-rich High Temperature Shape Memory Alloys”, invited oral presentation: ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, San Antonio, TX, USA, September (2018)
  87. A.W. Young*, M.L. Young, O. Benafan, and G.S. Bigelow: “Shape Memory Materials Database – NiTi-based High Temperature Shape Memory Alloys”, oral presentation: ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, San Antonio, TX, USA, September (2018)
  88. R.W. Wheeler, J. Smith*, N.A. Ley*, and M.L. Young: “Development and Characterization of Strain Glass Alloys in Ni49.5Ti50”, invited oral presentation: 27th International Materials Research Congress, Cancun, Mexico, August (2018)
  89. M.L. Young, M. Carl*, N. Ley*, J. Smith*, A. Young*, and R. Wheeler: “Processability and Advanced Characterization of High Temperature Shape Memory Alloys for Aerospace Applications”, invited oral presentation: Werkstoff Wissenschaft Seminar Series at Ruhr Universitaet - Bochum, Bochum, Germany, July (2018)
  90. C.S. Meredith, Z. Herl*, and M.L. Young: “Mechanical Behavior and Deformation Mechanisms of Mg in Shear Using In-Situ Synchrotron Radiation X-Ray Diffraction”, oral presentation: Society for Experimental Mechanics: 75th Annual Conference and Exposition on Experimental and Applied Mechanics, Greenville, SC, USA, June (2018)
  91. Y. Snir*, M. Carl*, N. Ley*, Y. Gelbstein, A. Landau, D. Eliezer, and M.L. Young: “The Effects of Thermomechanical Treatments on a New Fe-rich Dual-phase Complex Concentrated Alloy (CCA)”, oral presentation: 1st International Conference on Technological Innovations in Metals Engineering (TIME), Haifa, Israel, May (2018)
  92. S.M.  Aouadi, E. Blackert*, S. Briseño Murguia*, M. Kramer*, S. Bakkar*, and M.L. Young: “Highly porous scaffolds on TNZT alloys for bone implant applications”, oral presentation: 45th International Conference on Metallurgical Coatings and Thin Films, San Diego, CA, USA, April (2018)
  93. M. Issa*, S. Briseño Murguia*, Y. Snir, and M.L. Young: “Processing and Characterization of Porous High Entropy Alloy Structures via Freeze-Casting”, oral presentation:  147th Annual TMS Meeting, Phoenix, AZ, USA, March (2018)
  94. C. Lee*, J. Cooper, and M.L. Young: “Surface Treatment Study on Repair Methods for Trumpet Piston Valves”, poster presentation: UNT’s 5th Annual Showcase of Undergraduate Research in Engineering, Denton, TX, USA, November (2017) – 1st Place Winner
  95. E. Blackert*, S. Briseño Murguia*, M. Kramer*, M.L. Young, and S. Aouadi: “Textured TNZT Foams for Bone Implant Applications”, poster presentation: American Vacuum Society’s 64th International Symposium & Exhibition, Tampa, FL, USA, October (2017)
  96. M. Carl*, M. Steves*, L. Hartman, M. Leonard, and M. L. Young: “Analysis of Alessandro Allori’s Portrait of Grand Duchess Bianca Capello de Medici with Her Son”, oral presentation: 26th International Materials Research Congress, Cancun, Mexico, August (2017)
  97. Y. Snir*, M. Carl*, N.A. Ley*, Y. Gelbstein, A. Landau, D. Eliezer, and M.L. Young: “Exploring an Fe-rich eutectic complex concentrated alloy (CCA) with age hardening properties”, oral presentation: 26th International Materials Research Congress, Cancun, Mexico, August (2017)
  98. N.A. Ley*, M.L. Young, and O. Senkov: “Processing of a Ductile Refractory HfNbTiAl High Entropy Alloy”, invited oral presentation: 26th International Materials Research Congress, Cancun, Mexico, August (2017)
  99. N.A. Ley*, O. Benafan, and M.L. Young: “Advanced Characterization Study of Thermo-Mechanically Processed High Temperature Shape Memory Wires”, oral presentation: International Conference on Martensitic Transformations, Chicago, IL, USA, July (2017)
  100. M. Carl*, B. Van Doren, and M.L. Young: “Precipitate Growth and Volume Fraction of Ni-rich NiTiHf HTSMA using High Energy X-ray Diffraction”, poster presentation: International Conference on Martensitic Transformations, Chicago, IL, USA, July (2017)
  101. S. Briseño Murguia*, A. Clauser*, H. Dunn*, W. Grogg*, L. Mello*, Y. Snir*, R.E. Brennan, and M.L. Young: “Hydriding-Pulverization-Dehydriding Method of Preparing Shape Memory Alloy Powders”, oral presentation: International Conference on Martensitic Transformations, Chicago, IL, USA, July (2017)
  102. A. Young*, T. Torgerson*, K. Gomez*, and M.L. Young: “NiTiSn Shape Memory Alloy for Actuator Applications in Deep Space Expandable Habitat”, oral and poster presentation: Student Design Challenge, International Conference on Shape Memory and Superelastic Technologies, San Diego, CA, USA, May (2017) – 2nd Place Winner
  103. Y. Snir*, N.A. Ley*, M. Carl*, and M.L. Young: “Effects of Hydrogen-charging on the Phase Transformation of Martensitic NiTi Shape Memory Wires”, oral presentation: International Conference on Shape Memory and Superelastic Technologies, San Diego, CA, USA, May (2017)
  104. N.A. Ley*, O. Benafan, and M.L. Young: “Characterization of Thermo-Mechanically Processed High Temperature Shape Memory Alloys”, oral presentation: International Conference on Shape Memory and Superelastic Technologies, San Diego, CA, USA, May (2017)
  105. M. Carl*, B. Van Doren, and M.L. Young: “In-situ High Energy Synchrotron Radiation X-ray Diffraction Measurements during Aging of NiTiHf High Temperature Shape Memory Alloy”, oral presentation: International Conference on Shape Memory and Superelastic Technologies, San Diego, CA, USA, May (2017)
  106. M. Carl*, B, Van Doren, and M.L. Young: “In-situ SR-XRD Examination of Phase and Oxide Growth during a High Temperature Cycle with Short Isothermal Holds of a NiTi-20 at.% Zr HTSMA”, oral presentation: International Conference on Shape Memory and Superelastic Technologies, San Diego, CA, USA, May (2017)
  107. M. Kramer*, M.L. Young, and S.M. Aouadi: “Niobium Oxide Scaffolds on Nb and on TNZT for use in Bone Implants”, poster presentation: International Conference on Metallurgical Coatings and Thin Films, San Diego, CA, USA, April (2017)
  108. A. Yang*, J.J. Gu*, M.L. Young, and S.M. Aouadi: “Zirconium Carbide Based Self-Healing Ceramics”, poster presentation: International Conference on Metallurgical Coatings and Thin Films, San Diego, CA, USA, April (2017)
  109. A. Young*, T. Torgerson*, K. Tafoya*, and M.L. Young: “NiTiSn Shape Memory Alloy for Actuator in Deep Space Expandable Habitat”, poster presentation: UNT’s University Scholars Day, Denton, TX, USA, April (2017) 
  110. J.N. Strickland*, B.C. Ohl*, and M.L. Young: “Anisotropic Nature of Raw, Radially Strained, and Radially Strained and Aged Steel Tubes”, poster presentation: UNT’s University Scholars Day, Denton, TX, USA, April (2017)
  111. V. Tungala*, M. Carl*, A. Arora*, M.L. Young*, R. Mishra, K. Cho, and R. Brennan: “Effect of friction stir processing on microstructure and mechanical properties of cast Eglin steel (ES-1)”, oral presentation: TMS 146th Annual Meeting & Exhibition, San Diego, CA, USA, February (2017)
  112. Brandon Ohl*, Sheena Valentin*, Jon Callirgos*, Spencer Taylor*, and Ty Thomas*, Mentor: Dr. Marcus L. Young: “Clip-point Chopper from Recycled Steel”, oral presentation: 3rd Annual Bladesmithing Competition at 146th TMS Annual Meeting & Exhibition, San Diego, CA, USA, February (2017)
  113. Marcus L. Young: “Advanced Characterization Techniques for Archaeometallurgy”, invited oral presentation: at University of Texas at Dallas, Dallas, TX, USA, January (2017)
  114. S. Briseño Murguia*, J. Barclay*, D. Rodrigues, S.M. Aouadi, and M.L. Young: “Surface Modification of Titanium Foams produced by Freeze-Casting to Enhance Osseointegration”, oral presentation: ASM’s Materials Science and Technology (MS&T) Technical Meeting and Exhibition, Salt Lake City, UT, USA, October (2016)
  115. M. Carl*, G. Diaz*, F. Gantz*, F. Baas, and M.L. Young: “Studying Plating Thickness and Base Material Composition of Modern Silver-plated Cultural Heritage Objects using a Handheld X-ray Fluorescence Spectrometer”, oral presentation: ASM’s Materials Science and Technology (MS&T) Technical Meeting and Exhibition, Salt Lake City, UT, USA, October (2016)
  116. N. A. Ley*, O. Benafan, and M.L. Young: “Performance of Thermo-Mechanically Processed High Temperature Shape Memory Wires”, oral presentation: ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Stowe, VT, USA, September (2016)
  117. M. Carl*, J. Smith*, B. Van Doren, and M.L. Young: “Investigation of Transformation Temperature Characteristics due to Stoichiometric Changes in NiTiZr High Temperature Shape Memory Alloys (HTSMAs)”, oral presentation: ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Stowe, VT, USA, September (2016)
  118. Nathan A. Ley*, Jennifer Scozzari*, Sameehan Joshi*, Yee-Hsien Ho*, Narendra Dahotre, and Marcus L. Young: “Exploration of New Forging Materials: High Entropy Alloys”, oral presentation: 31st Forging Industry Technical Conference, Columbus, OH, USA, September (2016)
  119. Madelyn Kramer*, Elodie Leveque*, Joshua Barclay*, Matt Carl*, Nathan Ley*, Samir Aouadi, and Marcus L. Young: “Processing and Surface Treatment of TNZT Alloy for Biomedical Implants”, poster presentation: American Vacuum Society Texas Chapter Conference, Richardson, TX, USA, August (2016)
  120. Gabriela Diaz*, Matthew Carl*, and Marcus L. Young: “Handheld XRF Spectroscopy Measurements of Silver-plated Cultural Heritage Objects”, poster presentation: American Vacuum Society Texas Chapter Conference, Richardson, TX, USA, August (2016)
  121. Megan Steves*, Matthew Carl*, Laura Hartman, Mark Leonard, and Marcus L. Young: “Analysis of Alessandro Allori’s Portrait of Grand Duchess Bianca Capello de Medici with Her Son”, poster presentation: Gordon Research Conference: Probing Hierarchically Complex Historical Materials and Their Modes of Characterization and Alteration, Newry, ME, USA, August (2016)
  122. Marcus L. Young: “Case Studies using Synchrotron X-ray Diffraction and Some Preliminary Results on Multi-component Alloys”, oral presentation: AFRL RXCM Seminar, Dayton, OH, USA, June (2016)
  123. Matthew Carl*, Brian Van Doren, and Marcus L. Young: “Stoichiometric and Isothermal Aging effects on Transformation Temperatures of NiTi-20Zr High Temperature Shape Memory Alloys (HTSMAs)”, oral presentation: ASM’s 7th North Texas Inter-University Materials Science and Engineering Symposium, Richardson, TX, USA, April (2016) – 2nd Place Winner
  124. Hao Yu* and Marcus L. Young: “Modeling of High Strain Rate Deformation of Austenitic NiTi Shape Memory Alloys” ”, oral presentation: ASM’s 7th North Texas Inter-University Materials Science and Engineering Symposium, Richardson, TX, USA, April (2016)
  125. Silvia Briseño Murguia*, Keirsten Tafoya*, Ying Qiu*, and Marcus L. Young: “Effect of Freezing Temperature and Powder-to-Solution Ratio on Freeze-cast Copper Foams”, oral presentation: ASM’s 7th North Texas Inter-University Materials Science and Engineering Symposium, Richardson, TX, USA, April (2016)
  126. Nathan A. Ley*, Othmane Benafan, and Marcus L. Young: “Performance of Thermo-Mechanically Processed High Temperature Shape Memory Alloys”, oral presentation: ASM’s 7th North Texas Inter-University Materials Science and Engineering Symposium, Richardson, TX, USA, April (2016)
  127. Avery Young*, Silvia Briseño Murguia*, Ying Qiu*, and Marcus L. Young:  “Characterization and Mechanical Behavior of Hydrated, Dehydraded, and Pyrolized Mesquite Wood”, poster presentation: Dallas Fort Worth Society for the Advancement of Material and Process Engineering (SAMPE), 2016
  128. Brandon Ohl*, Spencer Taylor*, and Ty Thomas*, Mentor: Marcus L. Young: “Gladius-Inspired Sword from Recycled Steel”, oral, poster and video presentation, 2nd Annual Bladesmithing Competition at 145th TMS Annual Meeting & Exhibition, February (2016)
  129. Marcus L. Young: “Challenges for Shape Memory Alloys”, invited oral presentation, Energy Couple to Matter (ECM) Seminar at the US Army Research Laboratory (ARL), January (2016)
  130. Keirsten Tafoya*, Ying Qiu*, and Marcus L. Young: “Effect of Freezing Temperature and Powder-to-Solution Ratio on Freeze-cast Copper Foams”, poster presentation, UNT’s 3rd Annual Showcase of Undergraduate Research in Engineering, November (2015) 
  131. Matthew Carl*, Brian Van Doren, Scott Schlegel, and Marcus L. Young: “Precipitate Growth for Short Aging Times of a NiTiHf High Temperature Shape Memory Alloy”, oral presentation: Society of Engineering Science 52nd Annual Technical Meeting, October (2015)
  132. Ying Qiu*, Marcus L. Young, and Xu Nie: “Dynamic behavior of Martensitic NiTi Shape Memory Alloys”, oral presentation: Society of Engineering Science 52nd Annual Technical Meeting, October (2015)
  133. H. Yu* and M.L. Young: “Modeling of Strain Rate Effect on High Strain Rate Deformation of Austenitic NiTi Shape Memory Alloys”, poster presentation: Society of Engineering Science 52nd Annual Technical Meeting, October (2015)
  134. Matthew Carl*, Victoria Garcia*, Brian Van Doren, Scott Schlegel, and Marcus L. Young: “Effect of Heat Treating on Precipitate Phases in NiTiHf”, oral presentation, ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, September (2015)
  135. Nathan Ley*, Mageshwari Komarasamy*, Rajiv Mishra, and Marcus L. Young: “Synchrotron X-ray Diffraction Mapping of a Friction Stir-processed Al0.1CoCrFeNi HEA”, oral presentation, Denver X-ray Conference, August (2015)
  136. Baozhuo Zhang* and Marcus L. Young: “High Energy Synchrotron X-ray Diffraction Measurements of Simple Bending of Pseudoelastic NiTi Shape Memory Wires”, oral presentation, Denver X-ray Conference, August (2015)
  137. Sara Sabina Sanchez Berlanga*, Ying Qiu* and Marcus L. Young: “Preparation of Nickel Foams by Freeze Casting”, poster presentation, UNT’s SUPER Competition, July (2015)
  138. Baozhuo Zhang* and Marcus L. Young: “In-situ Synchrotron X-ray Diffraction Measurements of Simple Bending of NiTi Shape Memory Alloy Wires”, oral presentation, International Conference on Shape Memory and Superelastic Technologies, May (2015)
  139. Ying Qiu*, Xu Nie, and Marcus L. Young: “Static and Dynamic Mechanical Behavior of Martensitic NiTi Shape Memory Alloys”, oral presentation, International Conference on Shape Memory and Superelastic Technologies, May (2015)
  140. Ying Qiu* and Marcus L. Young: “Preparation and Characterization of Ice-templated Copper Foams”, invited keynote oral presentation, E-MRS, May (2015)
  141. Matthew Carl* and Marcus L. Young “Complimentary Analytical Methods for Analysis of Ag-Plated Cultural Heritage Objects”, oral presentation, TECHNART, April (2015) 
  142. Nathan Ley*, Mageshwari Komarasamy*, Matthew Carl*, Rajiv Mishra, and Marcus L. Young: “Synchrotron X-ray Diffraction of a Friction Stir Processed Al0.1CoCrFeNi High Entropy Alloy”, oral presentation: UNT’s University Scholars Day, April (2015) – 2nd Place Winner
  143. Baozhuo Zhang* and Marcus L. Young: “In Situ Synchrotron X-ray Diffraction Measurement of Simple Bending of NiTi Shape Memory Alloy Wires”, oral presentation, ASM’s 6th North Texas Inter-University Materials Science and Engineering Symposium, April (2015) – 4th Place Winner
  144. Ying Qiu* and Marcus L. Young: “Preparation and Characterization of Freeze-cast Copper Foams”, poster presentation: ASM’s 6th North Texas Inter-University Materials Science and Engineering Symposium, April (2015)
  145. Matthew Carl*, Erin Turner*, Marcus L. Young, and James Thurman: “Surface Investigation of Laser Engraved White Enamels”, poster presentation, UNT’s 3rd Annual Graduate Exhibition, February (2015) – 1st Place Winner
  146. Baozhuo Zhang* and Marcus L. Young: “In Situ Synchrotron X-ray Diffraction Measurement of Simple Bending of NiTi Shape Memory Alloy Wires”, poster presentation, UNT’s 3rd Annual Graduate Exhibition, February (2015)
  147. M.L. Young: “The Use of Synchrotron Radiation in Archaeometallurgy”, invited oral presentation: at Ruhr Universitaet - Bochum, November (2014)
  148. M.L. Young: “Advanced Characterization Techniques for Archaeometallurgy”, invited oral presentation: at Northwestern University, November (2014)
  149. Nathan Ley*, Mageshwari Komarasamy*, Matthew Carl*, Rajiv Mishra, and Marcus L. Young: “Synchrotron X-ray Diffraction of a Friction Stir Processed Al0.1CoCrFeNi High Entropy Alloy”, poster presentation, UNT’s 2nd Annual Showcase of Undergraduate Research in Engineering, November (2014) – 1st Place Winner
  150. Ying Qiu* and Marcus L. Young: “Mechanical Properties of NiTiCu Foam with High Porosity for Implant Applications”, poster presentation, 3rd Annual IEEE Medical Device Symposium, November (2014)
  151. Matthew A. Carl* and Marcus L. Young: “3-D Reconstruction of Ag-plated Cultural Heritage Objects Using Dual Beam SEM/FIB”, oral presentation: Materials Science & Technology, October (2014)
  152. M.L. Young: “Advanced Characterization Techniques: From Micro-, Nano-, and Atomistic Structures”, invited oral presentation: at Chemnitz University of Technology, June (2014)
  153. M.L. Young: “Advanced Characterization Techniques: From Micro-, Nano-, and Atomistic Structures”, invited oral presentation: Surface & Coatings Forum at the Manufacturing Expo 2014, June (2014)
  154. Matthew Carl*, Kevin Tucker, Mark Leonard, and Marcus L. Young: “Analysis of Cultural Heritage Objects using a Dual Beam Scanning Electron Microscope (SEM)/Focused Ion Beam (FIB) System”, poster presentation: UNT’s 2nd Annual Graduate Exhibition, June (2014) – 1st Place Winner
  155. Ying Qiu*, Marcus L. Young, and Xu Nie: “Influence of High Strain Rate Deformation on Microstructure and Mechanical Properties of Martensitic NiTi Shape Memory Alloys”, poster presentation: UNT’s 2nd Annual Graduate Exhibition, June (2014) – 2nd Place Winner
  156. H. Yu*, X. Nie, and M.L. Young: “High Strain Rate Deformation and Microstructure of Austenitic NiTi & NiTiFe Shape Memory Alloys”, oral presentation: International Conference on Shape Memory and Superelastic Technologies, May (2014)
  157. Y. Qiu*, M.L. Young, and X. Nie: “Influence of High Strain Rate Deformation on Microstructure and Mechanical Properties of Martensitic NiTi Shape Memory Alloys”, oral presentation: International Conference on Shape Memory and Superelastic Technologies, May (2014)
  158. Marcus L. Young, John D. DeFouw, D.C. Dunand, and Jan Frenzel: “Superelastic NiTiCu Foams Produced by Cast Replication”, oral presentation: International Conference on Shape Memory and Superelastic Technologies, May (2014)
  159. Stephanie Routh*, Huseyin Bostanci, and Marcus L. Young: “Graded Porous Copper Foam for Improved Cooling of High Power Devices”, oral presentation: UNT’s University Scholars Day, April (2014) – 3rd Place Winner for Paper
  160. Ying Qiu*, Marcus L. Young, and Xu Nie: “High Damping Capacity of Martensitic NiTi Shape Memory Alloys under Dynamic Loading”, oral presentation: ASM’s 5th North Texas Inter-University Materials Science and Engineering Symposium, April (2014) – 4th Place Winner
  161. H. Yu*, X. Nie, and M.L. Young: “High Strain Rate Deformation and Microstructure of Austenitic NiTi Shape Memory Alloys”, oral presentation: ASM’s 5th North Texas Inter-University Materials Science and Engineering Symposium, April (2014)
  162. Y. Qiu*, X. Nie, and M.L. Young: “Damping Capacity of Martensitic NiTi Shape Memory Alloys”, invited oral presentation: General Meeting of the Consortium for the Advancement of Shape Memory Alloy Research and Technology (CASMART), February (2014)
  163. M.L. Young: “Synchrotron Radiation in Archaeometallurgy: Shedding Light on Our Past”, oral presentation: ASM North Texas Chapter January (2014)
  164. Matthew A. Carl*, Chris A. Smith*, Marcus L. Young, Kevin Tucker, Mark Leonard, and Jon Dennis: “Dual Beam Scanning Electron Microscope and Focused Ion Beam (FIB): A Novel Method for Characterization of Cultural Heritage Objects”, invited oral presentation: Materials Research Society, December (2013)
  165. M.L. Young: “The Use of Synchrotron Radiation in Archaeometallurgy”, invited oral presentation: Materials Research Society, December (2013)
  166. M.L. Young: “Overview of Shape Memory Alloy Research at the University of North Texas”, invited oral presentation: General Meeting of the Consortium for the Advancement of Shape Memory Alloy Research and Technology (CASMART), December (2013)
  167. Hao Yu* and Marcus L. Young: “In-situ Observations of Deformation Behavior of NiTi-based Foams for Bio-Medical Applications”, poster presentation, 2nd Annual IEEE Medical Device Symposium, November (2013)
  168. Chistopher A. Smith*, Matthew Carl*, John Dennis, Kevin Tucker, Mark Leonard, and Marcus L. Young: “Dual Beam Scanning Electron Microscope (SEM) and Focused Ion Beam (FIB): A Novel Method for Characterization of Cultural Heritage Objects”, poster presentation, UNT’s 1st Annual Showcase of Undergraduate Research in Engineering, September (2013)
  169. S. Schlegel, B. Van Doren, and M.L. Young: “ATI Nitinol: Production and Properties”, oral presentation: AeroMat Conference and Exhibition, April (2013)
  170. J. Foltz, D.J. Bryan, G.E. Vignoul, and M.L. Young: “Development of ATI 425® Alloy Fastener Stock”, oral presentation: AeroMat Conference and Exhibition, June (2012)
  171. M.L. Young: “Shedding Light on Alloys by synchrotron X-ray Diffraction”, invited oral presentation, University of Calgary, March (2011)
  172. M.L. Young, S. Gollerthan*, J. Frenzel, W.W. Schmahl, A. Baruj, and G. Eggeler: “Phase Volume Fraction and Strain Mapping of Crack Extension in Pseudoelastic NiTi Shape Memory Alloys”, oral presentation: International Conference on Shape Memory and Superelastic Technologies, May (2010)
  173. R. Zarnetta, R. Takahashi, M.L. Young, M. Rahim, J. Frenzel, Y.S. Chu, I. Takeuchi, G. Eggeler, and A. Ludwig: “Combinatorial Development of Quaternary TiNi-based Thin Film Shape Memory Alloys”, oral presentation: International Conference on Shape Memory and Superelastic Technologies, May (2010) 
  174. M.L. Young and C. Maletta: “Modelling and Experimental Measurements of Stress-induced Martensite in Front of Cracks in NiTi Alloys”, poster presentation: International Conference on Shape Memory and Superelastic Technologies, May (2010)
  175. M.L. Young: “Shedding Light on Alloys by Synchrotron X-ray Diffraction”, invited oral presentation, Oregon State University, May (2010)
  176. D. Kurumlu*, M.L. Young, A. Dlouhy, and G. Eggeler: “Creep and In-situ TEM Investigations of Short-fiber Reinforced Metal Matrix Composites”, oral presentation: 139th Annual TMS Meeting, February (2010)
  177. M.L. Young, R. Rao, J.D. Almer, D.R. Haeffner, J. A. Lewis, and D.C. Dunand: “Load Partitioning in Al2O3-Al Composites with Three-dimensional Periodic Architecture”, oral presentation: 139th Annual TMS Meeting, February (2010)
  178. M.L. Young, S. Gollerthan*, J. Frenzel, W.W. Schmahl, A. Baruj, and G. Eggeler: “Strain Mapping of Crack Extension in Pseudoelastic NiTi Shape Memory Alloys”, oral presentation: 8th European Symposium On Martensitic Transformations (ESOMAT), Prague, Czech Republic, September (2009) 
  179. M. Frotscher*, M.L. Young, H. Bei, E.P. George, K. Neuking, and G. Eggeler, “Influence of Fatigue on the Nanohardness of NiTiCr-wires”, poster presentation: 8th European Symposium On Martensitic Transformations (ESOMAT), Prague, Czech Republic, September (2009)
  180. M.L. Young, M. Frotscher*, H. Bei, E.P. George, and G. Eggeler: “Nanoindentation of Ni4Ti3 precipitates in NiTi Shape-memory Alloys”, oral presentation: 15th International Conference on the Strength of Materials, August (2009)
  181. D. Kurumlu*, M.L. Young, A. Dlouhy, and G. Eggeler: “Creep of Short-fiber Reinforced Al Metal Matrix Composites”, oral presentation: 15th International Conference on the Strength of Materials, August (2009)
  182. M.L. Young, M. Wagner, S. Gollerthan*, J. Frenzel, W.W. Schmahl, and G. Eggeler: “Strain Measurements from Ultrafine-grained NiTi Wire”, oral presentation: European - Materials Research Society (E-MRS), Strasbourg, France, June (2009)
  183. M.L. Young, F. Casadio, J.D. Almer, D.R. Haeffner, D.C. Dunand, and S. Schnepp: “Non-destructive Synchrotron X-Ray Diffraction of Ancient Chinese Bronzes”, oral presentation: European - Materials Research Society (E-MRS), Strasbourg, France, June (2009)
  184. M.L. Young, M. Frotscher*, H. Bei, E.P. George, and G. Eggeler: “Using Nanoindentation to Probe Large Reversible Strains in Ni4Ti3 precipitates in NiTi Shape-memory Alloys”, poster presentation: Materials Research Society (MRS), San Francisco, CA, USA, April (2009)
  185. R. Zarnetta, S. Thienhaus, A. Savan, M.L. Young, R. Takahashi, I. Takeuchi, Y.S. Chu, and A. Ludwig: “Combinatorial Development of Quaternary TiNi-based Thin Film Shape Memory Alloys”, oral presentation: Materials Research Society (MRS), San Francisco, CA,USA, April (2009) 
  186. M.L. Young, M. Wagner, C. Grossmann, J. Frenzel, S. Gollerthan*, W.W. Schmahl, and G. Eggeler: “Microstrains and Phase Transformation Zones in Pseudoelastic NiTi Shape Memory Alloys”, oral presentation: 138th Annual TMS Meeting, San Francisco, CA, USA, February (2009)
  187. F. Casadio, M.L. Young, J.D. Almer, D.R. Haeffner, D.C. Dunand, S. Schnepp: “Penetrating the surface to explore the past: non-invasive SR-XRD investigation of ancient Chinese bronzes”, oral presentation: Light Sources Symposium at the American Association for the Advancement of Science Meeting, February (2009)
  188. M.L. Young, F. Casadio, S. Schnepp, J.B. Lambert, and D.C. Dunand: “From Matisse to Picasso – Compositional Analysis of Modern Bronze Sculptures”, oral presentation: The Art Institute of Chicago Northwestern University Joint Seminar Series on Conservation Science "Productive Affinities: Successful Collaborations between Museums and Academia", October (2008)
  189. H.X. Zheng, J. Pfetzing, J. Frenzel, M.L. Young, and G. Eggeler: “Reproducibility and Irreversibility of Nanoindentation in Ti50Ni48Fe2 and Ti50Ni40Cu10”, oral presentation: International Conference on Martensitic Transformations, July (2008)
  190. M.L. Young: “Load Partitioning in Particle-reinforced Metal Matrix Composites”, oral presentation: Werkstofftag Metallmatrix – Verbundwerkstoffe Treffen, May (2008)
  191. J. Olbricht*, A. Yawny, M.L. Young, and G. Eggeler: “Mechanical and Microstructural Observations during Compression Creep of a Short Fiber Reinforced AlMg Metal Matrix Composite”, oral presentation: 11th International Conference on Creep and Fracture of Engineering Materials and Structures, May (2008)
  192. D.R. Haeffner, J.D. Almer, F. Casadio, D.C. Dunand, B. Newbury and M.L. Young: ”Cultural Heritage Studied with High-energy X-rays at the APS 1-ID Beamline”, oral presentation: The Denver X-ray Conference, August (2008)
  193. F. Casadio, M.L. Young, J. Marvin*, J.D. Almer, D.R. Haeffner, and D.C. Dunand: “Analysis of an Ancient Chinese Bronze Fragment: A Reassessment after 50 Years”, oral presentation: 41st International Union of Pure and Applied Chemistry Congress, August (2007)
  194. A.C. Deymeir*, J.D. Almer, M.L. Young, S.R. Stock, D.R. Haeffner, and D.C. Dunand: “Determination of the Mechanical Properties of Bovine Dentin Via High-Energy X-ray Diffraction”, poster presentation: Users Meeting for the Advanced Photon Source and the Center for Nanoscale Materials, May (2007)
  195. M.L. Young: “Non-destructive Ancient Metalworking Technology by Synchrotron XRD and XRF”, poster presentation: Users Meeting for the Advanced Photon Source and the Center for Nanoscale Materials, May (2007)
  196. M.L. Young: “Synchrotron Techniques for Art and Archeological Studies”, oral presentation: Guest Lecturer for Department of Anthropology, University of Chicago, November (2006)
  197. D.C. Dunand: “Load Transfer between the Fe Matrix and Fe3C Reinforcement in Ultra-High Carbon Steel”, invited oral presentation: Materials Research Society, November (2006)
  198. M.L. Young, F. Casadio, S. Schnepp, J.D. Almer, D.R. Haeffner, and D.C. Dunand,: “High-Energy Synchrotron X-ray Diffraction and Imaging of Ancient Chinese Bronzes”, oral presentation: 5th International Conference on Synchrotron Radiation in Materials Science Conference Proceedings, August (2006)
  199. E.S. Friedman, A. Brody, M.L. Young, D. Peterson, and S. Mini: “High Energy Synchrotron Radiation Studies of Tin-Bronze Artifacts from Tell en-Nasbeh, Northern Judah, ca. 1000-586 BCE” , 5th International Conference on Synchrotron Radiation in Materials Science Conference Proceedings, June (2006)
  200. M.L. Young: “Strain Measurements and Imaging of Metal Matrix Composites using High Energy X-rays”, oral presentation: APS User Science Seminar, June (2006)
  201. M.L. Young, J. DeFouw, J.D. Almer, D.R. Haeffner, and D.C. Dunand: “Internal Strain Measurements and Imaging of Superconducting Mg/MgB2 Composites under Compressive Loading”, poster presentation: ASM Chicago Regional Chapter Student Night, April (2006)
  202. M.L. Young, J. Defouw, J.D. Almer, K. Fezzaa, W.K. Lee, D.R. Haeffner, and D.C. Dunand: “High Energy X-ray Diffraction Measurements and Imaging of Superconducting Mg/MgB2 Composites under Compressive Loading”, invited oral presentation: The Minerals, Metals, and Materials Society, March (2006)
  203. M.L. Young, J.D. Almer, U. Lienert, D.R. Haeffner, and D.C. Dunand: “Internal Strain Measurements in Ultrahigh-Carbon Steels”, oral presentation: The Denver X-ray Conference, August (2005)
  204. M.L. Young, J. Defouw, J.D. Almer, K. Fezzaa, W.K. Lee, D.R. Haeffner, and D.C. Dunand: “In-situ Strain and Imaging Measurements of Superconducting Mg/MgB2 Composites under Compressive Loading”, oral presentation: The Denver X-ray Conference, August (2005)
  205. M.L. Young, J. Marvin*, D.C. Dunand, J.D. Almer, K. Fezzaa, W.K. Lee, D.R. Haeffner, S. Schnepp, and F. Casadio: “Synchrotron X-ray Diffraction and Imaging of Ancient Chinese Bronzes”, invited oral presentation: The Art Institute of Chicago Northwestern University Joint Seminar Series on Conservation Science "Archeometallurgy in Perspective", June (2005)
  206. M.L. Young, D.C. Dunand, J. Marvin*, J.D. Almer, K. Fezzaa, W.K. Lee, D.R. Haeffner, S. Schnepp, and F. Casadio: “Synchrotron X-ray Diffraction and Imaging of Ancient Chinese Bronzes: Some Questions Waiting for an Answer”, oral presentation: Workshop SR2A 2005 "Synchrotron Radiation in Art & Archaeology", February (2005)
  207. M.L. Young, J.D. Almer, U. Lienert, K. Fezzaa, W.K. Lee, D.R. Haeffner, and D.C. Dunand: “Internal Strain Measurements and X-ray Imaging in Interpenetrating-Phase Al2O3/Al Composites”, oral presentation: Materials Research Society, November (2004)
  208. M.L. Young, J. D. Almer, U. Lienert, D. R. Haeffner, R. Rao, J. A. Lewis, and D. C. Dunand: “High Energy X-Ray Diffraction of Al2O3/Al Composites with 3-D Regular Architecture”, poster presentation: ASM Chicago Regional Chapter Student Night, March (2004)
  209. M.L. Young, J. D. Almer, U. Lienert, D. R. Haeffner, R. Rao, J. A. Lewis, and D. C. Dunand: “Diffraction Measurements of Load Transfer in Interpenetrating-Phase Al2O3/Al Composites”, oral presentation: The Minerals, Metals, and Materials Society, November (2003)